Aurora Electronics (UK) Ltd
Email: sales@aurora-ltd.co.uk
www.aurora-ltd.co.uk
Warranty
Your Aurora shredder is covered by a return to base warranty and in all instances should be returned
to your point of purchase for fault rectification.
Aurora warrants all parts of the machine to be free from defects in materials and workmanship for a
period of 1 year from the date of the purchase by the original consumer. If any part is found to be
defective during the warranty period the sole and exclusive remedy will be the repair or replacement
at Aurora’s option and expense of the defective part.
Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential damages
attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited to the cost of the
repair/replacement of the unit under warranty.
The warranty shall be immediately invalidated if unauthorized repairs or modifications are made, if
the machine has been abused or mishandled, if the product has been re-sold, or if the product has not
been operated in accordance with the instructions contained in this document.
The warranty is in addition to and does not diminish the consumer’s statutory or legal rights.
User Manual for the AS1023CD Aurora Shredder
IMPORTANT!
READ ALL INSTRUCTIONS BEFORE USING
Thank you for purchasing the AS1023CD Paper Shredder. This product is designed to shred paper and
small staples it will also accept small paper clips, credit cards and CD/DVD’s. It does not shred
adhesive labels, self-seal envelopes, transparencies, fabrics, glossy paper, newspaper, plastic (other
than credit cards), cardboard or continuous forms. Please note that using it for these purposes is likely
to cause damage and will invalidate your warranty. This paper shredder is not designed to shred large
volumes so please refer to the recommended usage capacity quoted below. You may find paper
particles in the bin when first opening the shredder this is a result of QC testing procedures.
Recommended Daily Usage = 50 passes per day. (5 minutes on/ 20 minutes off)
Assembly Instructions
CLIP FIRMLY SLIDE BIN
INTO PLACE INTO UNIT
CLIP FIRMLY
INTO PLACE
Safety Instructions
1. Before use inspect the shredder, mains cable and plug for damage or defects.
2. Locate the shredder away from heat and water sources.
3. Ensure the switch is set to ‘off’ before connecting to the mains.
4. Always keep ties, loose clothing, jewelry and long hair away from the shredder.
5. Keep children and pets away from the shredder.
6. Disconnect from the mains when not in use or when emptying or cleaning.
7. Do not insert fingers or objects into the shredder at any time.
8. Never attempt to dismantle the shredder for any reason, please return to an authorized service agent
for repair or servicing.
9. Never dispose of flammable chemicals or materials that have come into contact with flammable
chemicals (for example nail polish, acetone and petroleum) in the shredder bin. Never use flammable
oils, petroleum based products or flammable aerosols of any kind in the vicinity of the machine
including compressed air dusters.
Remove all packaging, shredder head and
castors.
Turn the lower casing upside down and insert
the four castors into the slots, pushing firmly
into place.
Fit the shredder head on top of the waste bin
and push down firmly to clip into place (there
should be no gap between the shredder head and
the casing).
If the shredder head is not seated correctly on
the casing the “Door Open” indicator will light
and the shredder will not operate, even if the bin
door is closed.
There is a safety cut out which is activated
when the door is open. The shredder will not
operate if the door is not closed correctly and
the “Door Open” indicator is lit.
Loading...