Aurender X100L, X100S User Manual

X100L / X100S

High Resolution Music Server and Player

User Guide

New features and improvements are regularly implemented through upgrades via the Internet.

Details of the latest upgrades can be found in the online version of the user guide at

www.aurender.com

12 Fl. Ace High-End Tower 8, 84 Gasan Digital 1-ro, Geumchoen-gu, Seoul 153-797, Korea

Tel: [phone] Fax: [phone]

Table of Contents

Page

Warranty 3
Box Contents 3
Instructions 3
Positioning 3
Front Panel 4
Rear Panel 4
Quick Start 5

1. Connections 5

2.

iPad Application Installation and Set Up

5

3. Selecting the Aurender Music Server 5

4. Entering passcode 5

5. Manually Checking for Upgrades 6

6. Setting Time and Language to iPad settings 7

7. Scan all files using the Scanner menu 7

8. Copying files to the Aurender 8
Aurender iPad Application 9
Technical Specifications 13

* iPad is a trademark of Apple Inc.

2

Two Year Warranty

The warranty period for Aurender Music Servers is two years including parts and labor. The warranty is
non-transferable and excludes damage due to (i) normal wear and tear, (ii) abuse, misuse, or neglect, (iii)
repair, attempted repair, or any modifications by anyone not authorized by TVLogic or its distributors. After
inspection, TVLogic will at its discretion repair, adjust or replace the product free of charge. Users are
responsible for shipping the products to TVLogic or an authorized service center, and Widealab will pay for
return shipping provided the repair is under warranty. Aurender Music Servers are automatically registered
when first logged onto the Internet. Only the serial number, date and IP address are recorded for warranty
purposes.

For any technical support issues, please contact [e-mail]

iPad, Wireless Router, Internet, D/A Converter, Cables

The iPad is the user interface for Aurender Music Servers and a wireless router is needed to connect the
iPad to the Aurender Music Server. An Internet connection is needed to update software and for remote
support, if needed. A digital-to-analog converter is needed to convert digital signal to an analog signal.

Box Contents

Aurender X100 AC Power Cord

Instructions

Please read the instructions carefully before setting up the Aurender Music Server.

1. Be careful not to drop the device to avoid internal damage.

2. Do not disassemble the device.

3. Keep magnetic materials away from Aurender to prevent data damage.

4. Do not expose device to oil, dust, water, high humidity, or smoke.

5. Keep ventilation openings free from obstruction.

6. When cleaning, use only a soft cloth. Keep out of contact with water or other liquids.

7. All servicing must be performed by a qualified technician, or the warranty will be voided.

8. Unplug power cord during severe lightning or when unused for a long period of time.

9. Unplug the device from the outlet only after completely turning off the unit.

10. Always turn the power off before connecting or disconnecting any cables.

Please note that hard drives can break down. It is important to back up your music collection periodically to
a separate memory device. In the event of drive failure, TVLogic is not responsible for any loss of data. The
drive manufacturers will only replace faulty drives under warranty and do not compensate to any loss of
data.

Positioning

1. Place your device on a flat, horizontal, and stable surface.

2. Keep away from heat sources, such as radiators.

3. Do not stack other products on top of the Aurender.

4. Allow space around the device for ventilation.

5. Do not place inside an enclosed cabinet.
3

Front Panel

1. On/Off/Standby - In the default mode, pressing will power the unit on and completely off. In the Standby
mode, pressing the front panel button will put the unit into standby, and the unit will turn on instantly. In
standby mode, to turn the unit off completely, keep the front panel power button depressed until the
button light begins to flash and then release. Flashing will stop when the unit is off. To switch to the
Standby mode, go to the Server Menu under Settings of the Aurender iPad application. Scroll to the
bottom to find the Standby On/Off button.

2. Display Menu - Press to cycle through 2 display options: Song Information and Playlist. Songs from
playlists may be selected using the four buttons on the right side of the front panel display. Use buttons
4 and 5 to scroll between playlists and button 2 to select a playlist. After the playlist is selected, press
button 2 again to start playback. Once the playlist is selected, buttons 4 and 5 buttons can be used to
select songs within the selected playlist. To see the Device Information Display, please keep the button
depressed for about three seconds until the display blinks, release the button and wait. The Device
Information Display with details about Server name, LAN/Wi-Fi status, IP address, and other details will
appear. To return to the normal display, press the button again.

3. Play/Pause - Press to start or stop playback.

4. Play Next - Press to skip to the next track.

5. Play Previous - Press to skip to the previous track.

6. AMOLED Display – To set display mode options, please go to Settings of the Aurender iPad App.

Rear Panel

1. USB Audio Class 2.0 Output - Connect to the USB input of a USB compatible digital-to-analog
converter.

2. Gigabit Ethernet port - To connect to home networks and NAS devices. The Ethernet cable should be
connected to the network router before turning on the Aurender.

3. USB 2.0 data ports - For copying from external USB memory devices.

4. AC Power Switch - Press top to turn on, bottom to turn off. The rear panel power switch should be used,

only after the unit has been turned off completely. Abnormal shutdown or using the rear panel power
button while the unit is in operation or standby can cause the system to to into check mode. In this case,
a message will appear on the display stating that the unit is checking the system.

5. AC Power Socket - Connect to a power outlet with AC Power cord.

4