AURATON 3013 Owner's Manual

Owner's Manual

для программного обеспечения вер. F0F

3013

www.auraton.pl

AURATON 3013

Congratulations on purchasing a temperature controller based on
cutting-edge technological solutions.

AURATON 3013

FrostGuard function

Protects your room against freezing.

Option to temporarily reduce the programmed
temperature

For maximum 12 hours.

Holiday mode

Up to eight days of temperature different than
programmed.

Backlit LCD display

Backlit display makes it possible to supervise the device
operation even in poorly lit rooms.

LCD

32

Description of AURATON 3013
temperature controller

LCD display

temperature
setting button

The front panel of the enclosure includes a backlit LCD display, four
function buttons and temperature setting knob with OK button.

temporary temperature
reduction button

controller
ON/OFF button

manual
mode button

AURATON 3013

knob with
integrated
OK button

1. Temperature

In normal mode, the controller displays the temperature in the

room in which it is installed.

2. Battery low ( )

This symbol appears when the battery voltage has dropped
below the acceptable level. Replace the battery ASAP.

NOTE: to maintain the settings the battery replacement should
last less than 30 seconds.

3. Temporary temperature reduction time

This symbols shows how long the temporary temperature

reduction mode will be on.

Display

1

2 3

4

5

6

7

8

9

4. Temperature unit ( )

Shows that the temperature is displayed in degrees Celsius.

5. Manual mode symbol ( )

Indicates the manual (holiday) mode temperature setting.

6. Indicator that the temporary temperature reduction
is programmed ( )

Indicates that the user has programmed the temporary

temperature reduction mode. It appears when the mode is not
currently on, but the function of temporary temperature
reduction is active (more information in the “Setting the

temporary temperature reduction mode” section).

7. Controller on indicator ( )

Indicates the device status. It appears when the controlled

equipment is turned on.

8. Indicator of temporary temperature reduction mode ( )

Appears when the temporary temperature reduction program

is running.

9. Number of holiday mode days ( ... )

Indicates the number of days for which the holiday mode

has been programmed.

..

54

Location can significantly affect the controller operation. Controller
located in a place with no air circulation or exposed to direct sunlight

may not work correctly. Install the controller on the internal wall of
the building (partition wall), in a place with air circulation. Avoid
installing it in the vicinity of heat generating devices (TV set, heater,
fridge) or in places exposed to direct sunlight. Installing the
controller near a door may also cause problems as the controller will
be exposed to vibrations.

Selecting a correct location

for the AURATON 3013 temperature controller