Auralic ARK MX+ User Manual

Revi

s

AUR

A

RM 1

Phon

Emai

ion 1.1

LIC LIMITED

9C, LOCKHAR

T

e: [phone]

3

l: support@aura

l

AR

CENTRE, 301-

3

12. Fax: +852 8

ic.com. Website

KMX+3

2

USE

R

07 LOCKHAR

T

199 9198

: www.auralic.c

o

Bit/192

K













’S G

ROAD, HK

m

HzUSB

A

UIDE

udioD/AConverter

2



Copyright © 2008-2011 AURALIC LIMITED (AURALiC) and licensors.

All rights reserved. No part of this publication including but not limited to, graphics, text,

code or interactive features, may be reproduced without the express written permission

from AURALiC or its licensors. The content of this manual is provided for information use

only, is subject to change without notice, and should not be construed as a commitment by

AURALiC. AURALiC assumes no responsibility or liability for any errors or inaccuracies

that may appear in this manual. AURALiC, inspire the music, ActiveUSB, AFN402, Alire,

Purer-Power and their graphic logos are trademarks or registered trademarks of AURALiC

in the Hong Kong and/or other countries. AURALiC's trademarks may not be used in

connection with any product or service that is not AURALiC's, in any manner that is likely

to cause confusion among customers or in any manner that disparages or discredits

AURALiC. All other trademarks not owned by AURALiC that appear on this site are the

property of their respective owners, who may or may not be affiliated with, connected to,

or sponsored by AURALiC.

3



Welcome

Thanks for choosing AURALiC product. ARK MX+ is a 32Bit/192KHz USB D/A Converter,

which is created for modern leisure lifestyle. It is advanced in design, powerful in functions

and precise in musical representation. To achieve the goal of perfect music replay, AU-

RALiC offers multiple original technical solutions by managing to combine the advanced

digital technology and the sophisticated analog circuit.

z AURALiC Sanctuary Audio Processor

The heart of ARK MX+ is AURALiC Sanctuary audio processor, which is jointly made

by AURALiC and its technical partner: Archwave AG in Swiss. Sanctuary is based on

multi-core ARM architecture, with the calculating capability as high as 1000MIPS, it

could handle 32Bbit/192KHz multi-channel real-time audio stream.

z ActiveUSB™

Resorting to the ActiveUSB™ technology from AURALiC, ARK MX+ overcomes the

transmission limitation from traditional Asynchronous USB which could only adjust +/-

one clock cycle error of data package in isochronous clock. With mass data buffer

technology and multi-stage, high resolution PLL circuit, ARK MX+ could buffer audio

stream as long as 2 seconds, which prevent time-based jitter resulted from the limi-

tation of computer.

z Self-adapted upsampling circuit

Upsampling to higher sample rates make improvements to fine detail, sound stage

depth and image separation. The self-adapted upsampling circuit inside ARK MX+

could automatically choose the best upsampling ratio; it could convert 44.1KHz &

88.2KHz to 176.4KHz or 48KHZ & 96KHz to 192KHz. Such self-judgment uses pro-

prietary interpolation technology to provide the highest possible fidelity at all sampling

rates from 44.1KHz to 192KHz so as to precisely restore the originality of music by

avoiding the signal distortion from non-integer ratio upsampling algorithm.

z Low noise DC amplification circuit

ARK MX+’s analog circuit adopts low noise DC amplification circuit designed by

AURALiC. All the components have been manually examined and preciously

matched. Low noise DC amplification circuit is the working fruit from our engineering

team after long-term design and optimization. It is low in noise and distortion but wide

in dynamic range. Moreover, since there is no couple capacitance in signal path, the

purity of audio signal could be ensured; thus, the music turns out to be naturally alive

and silky smooth.

For us, ARK MX+ is an artistic work that bears our dream and glory. Restless technical

innovation, meticulous working attitude together with perfect manufacturing requirements

are to spare no efforts from us making your private music hall better than ever.

4



Table of Contents



Warranty ......................................................................................................... 6

Unpacking ...................................................................................................... 6

Placement and Cabling ................................................................................. 7

Placement .................................................................................................. 7

Check Your AC Mains Voltage ................................................................... 7

Cabling ...................................................................................................... 8

Operation ...................................................................................................... 10

Power On/Off ........................................................................................... 10

Driver Installation ..................................................................................... 10

AURALiC USB Driver Control Panel ........................................................ 12

Playback Software Setting ....................................................................... 14

Use S/PDIF Single-Ended Digital Input ................................................... 16

How to Achieve Better Sound Quality ...................................................... 17

Maintenance & Service ................................................................................ 18

Maintenance ............................................................................................ 18

Service ..................................................................................................... 18

Contact .................................................................................................... 18

Troubleshooting ........................................................................................... 19

No Power ................................................................................................. 19

No Sound or Low Output ......................................................................... 19

Distorted or Partial Sound ........................................................................ 19

Noise/Hum ............................................................................................... 19

Specifications............................................................................................... 20

EC Declaration of Conformity ..................................................................... 21

AURALiC Product Registration Form ........................................................ 23



5









IMPORTANT SAFETY INSTRUCTIONS



z All safety and operating instructions should be read before the product is operated,

and retained for future reference.

z This product should be operated only from the type of power source indicated on the

back of the unit. If you are not sure of the type of your mains power supply, consult

your dealer or local power company.

z To completely disconnect this product from the AC mains, disconnect the power

supply cord plug from the AC receptacle.

z Do not use the product near water, i.e. near a bathtub, kitchen sink, laundry tub, in a

wet basement, near a swimming pool etc.

z Do not install the product near heat sources such as radiators, heat registers, stoves,

or other apparatus that produce heat. See “Placement and Cabling” on page 7.

z Do not let objects or liquids fall into the product. Do not expose the product to dripping

or splashing. Do not place a vessel containing liquid on top of the product.

z Clean only with a soft, dry cloth.

z Do not attempt to service this product yourself. Opening or removing covers may

expose you to dangerous voltage. Refer all servicing to authorized service personnel.

See “Service” on page 18.



6



Warranty

AURALiC offers a 90-day factory warranty from the date of purchase that can be extended

to a 3-Year limited warranty. This non-transferable warranty is available to the original

owner by completing the product registration form including the original sales information

from your authorized AURALiC dealer within 30 days of purchase. You could either use

the online registration form on our website (www.auralic.com) or fill ‘AURALiC Product

Registration Form’ on page 23 and send it back to your dealer to finish the registration.

Warranty coverage includes all parts and labors. Warranty is void if damage is due to

abuse, neglect or unauthorized modification. Cost associated with the return of this

product is the sole responsibility of the owner. All repair work must be done by AURALiC

or by an authorized AURALiC repair agency. Work done by unauthorized persons will void

any and all warranty coverage.

AURALiC products are uniquely identified with a serial number (S/N) on the back of the

unit. This number is required to validate your warranty. Please reference your serial

number if service is required.

Before the product can be returned for service, an RMA (Return Material Authorization)

number must be issued by AURALiC. Contact your dealer or AURALiC for further infor-

mation. Units without an RMA number will not be accepted for service.

Unpacking

Please confirm that the following items are in the box:

z ARK MX+

z AC Power Cord

z USB Cable

z User’s Guide

z Product CD

Carefully unpack each piece, if there is any damage, or if anything is missing, please

contact your dealer or AURALiC.

ONLY SHIP THIS PRODUCT IN ITS ORIGINAL PACKING!

Please be sure to retain the original shipping carton and all packing materials as they are

specially designed to protect the unit during transportation or shipping.

7



Placement and Cabling

Placement

ARK MX+ should be placed on a solid and stable surface with good ventilation. Do not

install this product near any heat sources such as radiators or other product (such as

amplifiers) that produce heat. Site the product so that its location or position does not in-

terfere with its proper ventilation. For example, it should not be situated on a bed, sofa,

rug, or similar surface that may block the ventilation openings, or placed in a built in in-

stallation such as a bookcase or cabinet that may impede the flow of air through the ven-

tilation openings.

Ventilation Requirement

ARK MX+ dissipates up to 20 Watts of power during normal operation. It

should be installed in a space with at least one inch of clearance above,

behind and on both sides of its enclosure to provide adequate ventilation.

Avoid placing it directly above other equipment that produces heat.

Check Your AC Mains Voltage

ARK MX+ is shipped with its mains voltage preset for operation in the destination country.

The mains voltage setting is written on the back of the unit, right besides power cord

socket. Mains voltage setting is not intended to be changed by the user. If it needs to be

changed, contact your dealer or AURALiC.

The power cord has a three-wire grounding type plug (a plug having a third pin for groun-

ding). It will only fit into a grounding type power outlet. If you are unable to insert the plug

fully into the outlet, contact your dealer or AURALiC. Do not defeat the safety purpose of

the grounded type plug.

ARK MX+ MUST BE USED WITH CORRECT

MAINS VOLTAGE AND PROPERLY EARTHED!



Ca

b

Th

e

123

4

Ple

a

this

z

Th

e

as

t

unu

Th

e

of

Xhom

or

a

ling

I/O ports o

n

Right B

a

Right Si

Left Sin

g

Left Bal

a

se be sure

instruction

m

Analog O

u

balanced

a

o be used

sed ports t

o

amplitude

f

LR balanc

e

e audio de

v

ctive louds

p

the back

o

lanced An

a

ngle-Ended

le-Ended

A

nced Anal

o

to power o

f

ay result i

n

ALWAYS

P

tputs

nd single-

e

simultaneo

u

avoid any

p

or 0dBFS

o

d outputs

w

ices so if y

o

eaker, plea

f the unit a

r

log Output

Analog Ou

t

nalog Outp

u

g Output

f all units in

permane

n

OWER O

F

nded analo

gsly

, howe

v

otential el

e

f ARK MX

+

ith its pin

2

u are abo

u

se make su

8

e shown as

5

put 6

t 7

8

your syste

m

t damage t

o

F ARK MX

+

outputs o

f

er, it is stil

l

ctromagnet

is 2Vrms o

as positiv

e

t to connec

t

re it will not

following:

AES/EBU

USB 2.0

C

S/PDIF Si

n

AC Mains

before an

y

the device

BEFORE

ARK MX+

strongly r

e

ic interfere

n

f

RCA singl

e

. This outp

ARK MX+

overdrive t

h

Balanced

D

ommunica

t

gle-Ended

Power Cor

d

cabling jo

b

and void a

n

CABLING!

are individ

u

commend

e

ce induced

-ended ou

t

ut level is

h

directly to

a

e later one

’

igital Outp

u

ion Port

Digital Inp

u

Socket

, failed to f

o

y warranty.

ally buffer

e

d to disco

n

by cable.

puts and 4

V

igher than

m

power am

p

s input.

t

t

llow

d so

nect

rms

ost

lifier

9



Direct Connecting to Power Amplifier or Active Loudspeakers

If ARK MX+’s analog outputs are connected directly to power amplifiers or

active loudspeakers, the product should be powered on for 15 seconds or

longer before the power amplifiers or active loudspeakers are powered on.

Before power off ARK MX+, the power amplifiers or active loudspeakers

should be powered off first.

z AES/EBU Balanced Digital Output

ARK MX+’s digital output is transformer coupled, supporting AES/EBU standard digital

stream up to 24Bit/192KHz.The stream is possible to be converted to S/PDIF level with

appropriative adapter. Digital output port is internally connected to AURALiC Sanctuary

processor with individual channels and will not automatically function unless manually set

by user. Please refer to page 15 for more information.

z USB 2.0 Communication Port

By connecting to the computer via USB 2.0 port, ARK MX+ delivers bit-perfect audio

stream with format up to 32Bit/192KHz. Specific drivers are required for operation under

Windows PC system, please refer to ‘Driver Installation’ on page 10.

When you use the USB 2.0 port, please make sure there is no signal presents at digital

input port to avoid any possible synchronization issue.

z S/PDIF Single-Ended Digital Input

ARK MX+ accepts digital input stream in S/PDIF format though a 75 ohm single-ended

RCA port; this digital input is also compatible with 75 ohm single-ended transformed

AES/EBU stream. The sampling rates supported by ARK MX+ though its digital input are

44.1Khz, 48KHz, 88.2KHz, 96KHz, 176.4KHz and 192KHz with word length up to 24bit.

It is recommended to disconnect USB cable when you use the digital input to avoid any

interferer induced by computer and future avoid any possible synchronization issue.

FEED BOTH USB AND S/PDIF PORTS WITH SIGNALS

AT ONE TIME WILL RESULT IN SYNCHRONIZATION ISSUE

THIS WILL FORCE ARK MX+ TO MUTE AUTOMATICLLY.



O

p

Po

w

Th

e 1

AR

K

anti

c

Th

e

Dri

v

Ap

p

no

n

inst

a

Th

eSan

XP/

V

z

z

erati

o

er On/O

f

front panel

Power

L

MX+ will

p

lockwise o

Power LE

D

z LED o

z LED li

g

z LED fl

a

er Instal

l

le Mac OS

eed for dri

v

lled for pr

o

following

p

ctuary US

B

ista/ 7 sys

t

Connect y

o

PC with U

S

Find and

c

‘setup.exe’

n

of ARK MX

ED

ower on by

peration.

indicates

c

ff: Power O

f

ht: Ready

t

sh: Lockin

g

ation

X 10.6.4 or

er installati

per operati

o

rocedure i

Driver Co

em (32 or

6

ur ARK M

X

B cable pr

o

lick folder ‘

A

.

+ is shown

a

operate th

e

urrent wor

k

o work

sampling

r

above syst

e

on. AURAL

i

n under Mi

c

nstalls AR

K

ntrol Panel’

4bit), and

a

+ to the m

a

vided, DO

N

RKMXPL

U

10

s following

2

rotary po

w

status of A

R

ate in prog

r

m natively

C Sanctua

r

rosoft Win

d

MX+’s A

S

on your

W

spare US

B

ins supply

OT POW

E

S_USBDri

v

:

Rotary Po

w

er switch in

K MX+:

ess

support U

S

y USB driv

e

ows opera

t

IO and W

indows P

C

2.0 port.

with power

R ON ARK

er_5_22_1’

w

er Switch

clockwise

a

B 2.0 audi

o

package

i

ion system.

DM drivers

. You mus

t

cord; conn

e

MX+ NOW

in the pro

d

nd power

o

device, th

e

s required

t

and ‘AUR

A

have Win

d

ct ARK M

X

.

uct CD an

d

ff by

re is

o be

LiC

ows

+ to

run

11



The setup wizard warns you to

shut down other applications

prior to installation. Do so and

click 'Next'.

Choose the installation folder

location by clicking 'Browse…'

if required, or else use the de-

fault (recommended); click

‘Install’.

Installation will then proceed.

Since ARK MX+ drivers have

not been submitted for Win-

dows Logo testing, warnings

will be issued during installa-

tion. Select 'Continue anyway'

when these occur.

12



Click ‘Finish’ to close the setup

program. The device should

now be visible to Windows and

any applications as both ASIO

and WDM audio device

AURALiC USB Driver Control Panel

ARK MX+ will work automatically after drivers’ installation without additional setting. AU-

RALiC also provides a control panel program with advanced options for future tuning.

Start ‘AURALiC USB Driver Control Panel’, select ‘Synchronisation’ on the left hand side,

you will see the following interface:

When you see this notice,

please power on ARK MX+

and press ‘OK; setup program

will install device automatically.

You will see the Windows

pop-up notice after ARK MX+

has been installed successfully.

13



z Sampling Rate Selection Mode

This option sets the work mode of ARK MX+. We suggested you to use ‘Manual Mode’,

which allows playback program to send commands to ARK MX+ and switch sampling

rates. If you choose ‘Automatic Mode’, ARK MX+ will work at a fixed sampling rate set

by Windows WDM driver and can not be changed by playback program or by manual.

z Sampling Rate

Sampling rate option shows current work sampling rate of ARK MX+. It is usually set by

playback program automatically, but you can change it by manual here.

z Clock Source

You may select different master clock of ARK MX+ by changing this option. ‘Device In-

ternal Clock’ is the default setting which actives AURALiC’s ActiveUSB™ technology

and provides lowest jitter for best sound quality.

It is also possible to adjust several buffer depths in ‘Settings’ page:

14



z Stream buffer depth

Stream buffer depth option sets the global buffer depth of ARK MX+. The default setting

is ‘16.0 ms’ for stable consideration; try to set a lower buffer depth if possible.

z ASIO buffer depth

ASIO buffer depth option sets the buffer depth when playback using ASIO output. This

value is set to maximum by default; try to set a lower buffer depth if possible.

z WDM sound buffer depth

WDM sound buffer depth option sets the buffer depth when playback using WDM output.

This value is set to maximum by default; try to set a lower buffer depth if possible.

Buffer depth settings will affect jitter performance of ARK MX+ which results in different

sound quality. It is always recommended to set the value as low as possible. A modern PC

with a ‘clean’ Windows system should be able to replay music without interrupt at all three

buffer depths set to lowest.

Playback Software Setting

ARK MX+’s Windows drivers include a specific ASIO driver, it is highly recommended to

use audiophile grade software (such as foobar2000, J.River Media Center) which support

ASIO output for bit-perfect playback.

15



Foobar2000 is the most common used audiophile grade software under Windows system.

We will explain the setting procedure in the next following paragraphs.

z Download and install foobar2000 program at official website:

http://www.foobar2000.org/

z Download ‘ASIO support 1.2.7’ plug-in from official website:

http://www.foobar2000.org/components/view/foo_out_asio

z Extract the ‘foo_out_asio.zip’ you just downloaded and put ‘foo_out_asio.dll’ file to

the ‘components’ folder under foobar2000 folder, for example: ‘C:\Program

Files\foobar2000\components’

z Start foobar2000 program, click ‘File’ on menu and select ‘Preferences’ to open

preferences window. Click ‘Playback>‘Output’ then select ‘ASIO Virtual Devices’:

Select ‘Add New’, open ‘ASIO Virtual

Device Editor’ window.

Map the ‘Line[1] O L’ as ‘Left’ and

‘Line[1] O R’ as ‘Right’ to active the

analog outputs of ARK MX+.

If you are about to use the AES/EBU

digital output, you should also map the

‘SPDIF [1] O L’ and ‘SPDIF [1 ] O R’ as

left and right channels.

z Click ‘OK’ to close ‘ASIO Virtual Device Editor’ window, then click ‘OK’ on ‘Prefe-

16



rences’ window.

z Close foobar2000 program and restart it.

z Go to ‘Preferences’>’Playback’>’Output’, select ‘ASIO: AURALiC Sanctuary USB

ASIO’:

z Click ‘OK’ on ‘Preferences’ window.

Now, you have enabled ARK MX+’s bit-perfect playback in foobar2000.

You can download the ASIO output pre-set foobar2000 program at AURALiC’s website

under ‘Drivers and Manuals’ section.

Use S/PDIF Single-Ended Digital Input

ARK MX+ will act as a standalone D/A Converter when using the S/PDIF digital input. To

use the digital input, please refer to the following steps:

z Power off ARK MX+ first; connect digital input to digital source by a 75 ohm digital

cable and power on unit.

17



z ARK MX+ will detect digital signal present at digital input automatically and try to lock

the sampling rate, the Power LED will flash during the locking progress.

z When Power LED keeps light, the unit is ready to work.

z If the sampling rate presents at digital input changed during work, ARK MX+ will try to

lock the new frequency immediately.

Please make sure to disconnect any cable at USB port when you use the digital input

function. To change back to USB port, please power off your ARK MX+ before disconnect

the digital input cable.

How to Achieve Better Sound Quality

AURALiC recommend you to use a specific computer with ‘clean’ system to achieve best

listening experience. Installing a lot of software on operation system will increase the

system latency and degrade sound quality.

ARK MX+’s Windows drivers include a specific ASIO driver, it is highly recommended to

use audiophile grade software (such as foobar2000, J.River Media Center) which support

ASIO output for bit-perfect playback.

Process a Windows system optimization will remarkably improve the sound quality. AU-

RALiC finds ‘CPlay’ with ‘cMP’ to be the best sounding playback software under Windows

system so far. Please refer to the following link:

z CPlay and cMP software website:

http://www.cicsmemoryplayer.com/index.php?n=Main.HomePage#cPlay

z Windows system optimization guide:

http://www.cicsmemoryplayer.com/index.php?n=CMP.07Optimisations

If you run ARK MX+ under Apple Mac OS X system, we highly recommended you to use

‘CHANNEL D Pure Music’ playback software which allows for bit-perfect replay in OS X

system. Pure Music will greatly improve the sound quality of OS X system.

z CHANNEL D Pure Music:

http://www.channld.com/puremusic/

18



Maintenance & Service

Maintenance

ARK MX+ does not require regular maintenance in normal use. However, there are a few

things that will help to keep it in good operating and cosmetic condition:

Cleaning

Only clean the enclosure with a soft, dry cloth.

Extended Nonuse

Disconnect ARK MX+ from mains power when it will be left unattended or unused for an

extended period of time.

Service

If your ARK MX+ encounters a problem, contact your dealer or AURALiC. Do not void the

warranty by allowing unauthorized personnel to attempt repairs. Do not attempt to service

the product yourself. Opening the cover may expose you to dangerous voltage, as well as

void the warranty.

Before ARK MX+ can be returned for service, an RMA (Return Material Authorization)

number must be issued by AURALiC. Contact your dealer or AURALiC for further infor-

mation.

Contact

If you have any question, please feel free to contact our technical support department:

AURALIC LIMITED

B406, No.11 East Shixing Street

Shijingshan District, Beijing, 100041

China

[e-mail]

www.auralic.com

19



Troubleshooting

No Power

z Examine the power cord to be sure that it is connected to both the AC mains con-

nector and an AC wall outlet.

z Try substituting another power cord.

z Check the AC mains voltage setting on the back of the unit and see if it is according to

your local power voltage.

No Sound or Low Output

z Examine all cables to ensure a solid connection between the ARK MX+ and asso-

ciated components.

z If you are using the USB port, make sure the playback software’s volume is set to an

audible level and not muted.

z Make sure all associated components are powered on.

z Make sure the associated component connected to the selected input is producing an

audible input signal.

z Only one signal is allowed to be present at USB and S/PDIF ports at one time, please

be sure to disconnect either of these two’s cables.

z Try rebooting the ARK MX+ by cycling the power (power off the ARK MX+, then

power on again).

Distorted or Partial Sound

z Check the output cables between the ARK MX+ and the preamplifier/power amplifi-

ers/active loudspeakers, making sure all connections are good and sound.

z Make sure that all speaker connections are tight and that there are no stray strands of

wire shorting across the speaker terminals.

z Try rebooting the ARK MX+ by cycling the power (power off the ARK MX+, then

power on again).

Noise/Hum

z Check the output cables between the ARK MX+ and associated components, making

sure all connections are good and sound.

z Make sure the output cables between the ARK MX+ and the power amplifiers are not

routed near AC cables, power transformers, or other EMI inducing devices.

z It may be helpful to plug all associated components into the same AC circuit in order

to share a common ground.

20



Specifications

Frequency Response

DC - 20KHz, +/- 0.02 dB

Signal/Noise

118 dB, 20Hz-20KHz, A-weighted

THD+N at Maximum Level

<0.0005%, 20Hz-20KHz

Dynamic Range

124dB, 20Hz-20KHz, A-weighted

Output Port

Balanced Analog Output, 4Vrms into >5Kohm
Single-Ended Analog Output, 2Vrms into >5Kohm
AES/EBU Digital Output*

Input Port

USB 2.0 Port** (44.1-192KHz, up to 32Bit)
S/PDIF Digital Input (44.1-192KHz up to 24Bit)

Power Dissipation

20 Watts

Dimension

11''W x 9''D x 2.6''H (33cm x 23cm x 6.5cm)

Weight

12 lbs (5.5kg)

* Digital output supports 44.1-192KHz sampling rate up to 24Bit.

** USB 2.0 Port works under Windows XP/Vista/7, Apple OS X 10.6.4(and above) only.

All specifications are subject to change without notice.

21



EC Declaration of Conformity



AURALIC LIMITED declares this product is in conformity with the Low Voltage

Directive 73/23/EEC and Electromagnetic Compatibility 89/336/EEC as

amended by 92/31/EEC and 93/68/EEC.

The conformity of the designated product with the provisions of Directive

number 73/23/EEC (LVD) is proved by full compliance with the following

standards:

EN60065 2002 General requirements

The conformity of the designated product with the provisions of Directive

number 89/336/EEC (EMC) is proved by full compliance with the following

standards:

EN55013 2001 Conducted emissions

EN55013 2001 Absorbed emissions

EN55020 2002 Immunity

The conformity of the designated product with the provisions of Directive

number 2005/32/EC ecodesign requirements is proved by full compliance with

the ‘off mode’ setting power of 0.0 Watts.

22



23



AURALiC Product Registration Form

Owner Information

Your Name

Street Address

City

Zip Code

Country

Email

Telephone

Product Information

Product Type

Serial Number

Dealer Name

Purchase Date

Purchase Price

Currency

24

