Auralex Acoustics AudioTile ShockWave User Manual
Installation Guidelines
Thank you for purchasing pArtScience™ AudioTile™ 24 piece set—the next generation of acoustical treatments from
Auralex® Acoustics. Varying thickness built into each patent-pending AudioTile delivers excellent broadband
absorption, while the tessellated forms allow a unique means of blending absorption, diffusion, and reflection for
optimum acoustical performance.
AudioTile Features Include:
H Maximum Broadband Absorption: Absorption coefficient of 0.81 @ 125 Hz. Maximum NRC = 1.00 to 1.05
depending on installation
H Varying Thickness: Foam thickness varies from 1” to 4” to provide effective absorption at a wide range of
frequencies
H Unlimited Tessellation Design Patterns: Allows a unique means of blending absorption,
diffusion and reflection
H Easy Installation: Mount using Foamtak™ spray adhesive, Tubetak Pro™ liquid adhesive
and/or Temp•Tabs™ Studiofoam® mounting kits
This installation guide includes general recommendations and installation procedures for seven possible designs you can create
from this 24 piece box of AudioTile. To see additional design ideas, visit the AudioTile design gallery at Auralex.com. Should you
have any questions about the installation of your pArtScience AudioTile System, feel free to contact an Auralex Application
Specialist via email at appsupport@auralex.com or call 1-800 -95-WEDGE. For best results, fill out a Personalized Room
Analysis Form (http://www.auralex.com/pcf/) before calling so the application specialist can properly assist you.
Thank you for purchasing Auralex
®
Total Sound Control
®
products!
Installation pictured here
requires multiple sets.
834 -40 6 | Rev. 1 | 06 060 6 EDL
INSTALLATION GUIDE*
CAUTION
TIP
TIP
This box contains 24 AudioTiles. Carefully remove each tile from the box and sort into four separate piles
➊
according to their unique shapes, as shown:
➋
6 each
A
Before applying adhesive, build the design on the floor
first to get an idea of placement.
Apply adhesive (sold separately) to the back of an AudioTile
according to the specific adhesives instructions:
Foamtak™ Spray Adhesive Tubetak Pro™ Liquid Adhesive TEMP•Tabs™ Mounting Kit
For best results, turn the spray
nozzle counter clock wise until it
stops a t the “L” position.
B
6 each
6 each
C
Requires standard-size caulk gun. TEMP•Tabs are a temporary S tudiofoam
mounting solution designed for easy
installation and maximum flexibility.
Requires standard-size caulk gun.
6 each
D
➌
Practice spraying on a piece of cardboard
before attempting to spray the AudioTiles.
Af ter applying adhesive, plac e AudioTile in the
appropriate location according to any one of the design
layout templates shown.
Use any of the design layout templates shown or create your own
one-of-a-kind design.
*Visit Auralex.com to view other exciting AudioTile designs you can build using the same components!
Loading...