Auralex WaveLens User Manual
1264- 0111 | Rev. 1 | 011711 TME
™
W aveLens
WaveLens™ Installation Guidelines
The following instructions are provided to assist you in installing the WaveLens panels in a drop tile ceiling or on a wall. The most effective
installation is generally above a critical listening position.
(2) WaveLens (8) Well Covers
Additional items you may need for this install (not included): level, pencil, drill, ladder, drywall screws.
(8) Mounting
Screws
(8) Wall Anchors (8) Mounting Blocks
Congratulations on purchasing WaveLens Diffusors! Acoustic sound diffusion keeps sound waves from grouping
by scattering the sound more evenly throughout the room. Make your room sound larger and more live by adding
diffusion to your space.
The Auralex WaveLens scatters and redirects acoustical energy and can be an effective alternative to absorbing
reflections. The WaveLens can be beneficial in numerous applications: creating a “large sound” in a small room,
optimizing absorption panels by redirecting energy so that they are more efficient, or using the acoustical properties
of an adjacent space to enhance your listening or recording environment. The WaveLens is sized to drop into a
suspended ceiling grid or can be installed using the supplied mechanical fasteners. The bamboo material offers a more
musical experience when tested against comparable products made from hardened fiberglass or plastic.
www.Auralex.com | 1-800-959-3343 | auralexinfo@auralex.com | Total Sound Control
®
W aveLens
WaveLens™ Installation Guidelines
™
Wall installation
1. Using a level, locate where panels will hang. Place the panel on the wall and use a pencil to mark foam block
locations on the wall.
2. Remove product from wall and drill holes. Then insert plastic anchors.
3. Place foam blocks on wall and screw in place.
4. Fit panel over foam blocks. Finish by placing wooden inserts over foam blocks within the wells.
Ceiling installation
1. Drop panels into empty ceiling grid.
Loading...