Auralex SonoLite User Manual
™
SonoLite
SonoLite™ Installation Guidelines
SonoLite™ absorption panels are designed to reduce unwanted reflections and flutter echo in critical listening environments such as
control rooms, live rooms and rehearsal spaces. These 2’x2’x1” panels will clean up the sound in your room, and are a cost-effective
alternative to fiberglass fabric-covered panels.
The core of each SonoLite™ panel is made of our highly efficient absorbing acoustical foam, Studiofoam®Pro. This panel is then
covered in a velour fabric to add a stylish appeal to accent the décor of any room. For an affordable yet tasteful way to improve the
acoustics in any room, SonoLite™ absorption panels are the solution!
www.Auralex.com | 1-800-959-3343 | auralexinfo@auralex.com | Total Sound Control
®
SonoLite
1273- 0311 | Rev. 1 | 031611 TME
SonoLite™ Installation Guidelines
Wall installation
Adhesive materials not included. Suggested
materials for installation are: Velcro®, industrial
strength double-stick tape, or 3M Command™
Strips.
1. Using a level, locate where panels will hang.
Place the panel on the wall and use a pencil to
mark the final locations on the wall.
2. Remove product from wall and add adhesive.
3. Place panel over mark and press firmly to
adhere panel to wall.
™
www.Auralex.com | 1-800-959-3343 | auralexinfo@auralex.com | Total Sound Control
®
Loading...