Page 1
Thank you for purchasing the Auralex Acoustics MAX-Wall
Modular Acoustical Environment.
You now have a higher quality recording and listening environment.
Page 2
Clutch
Position A
Position B
Decide how you want it setup,
then follow these easy steps:
1. Setup the MAX-Stand
to the desired height. Fully
2. Remove the inner foam core
fr o m th e c en t er of e ach
panel
panel and push dow n to
to secur e the bottom
panels until the desired
4. If the desired height is above the clutch, place a
friction will likely hold the panels in position. We
to insure no slipping or sagging over
Modular Acoustical Environment
®
on your room surfaces. It’s also great when you need to be able to quickly and
Auralex
®
products such as
bass traps
and family of diffusors, as well as all of our construction-related
4'
7' 8"
1'8"
3'4"
figure 1
3 panels = 5'
Instruction Sheet
Decide how you want to layout your
a. 1 single panel = 4’
b. 2 interlocked panels = 7’8”
c. 3 interlocked panels = 11’4”
a. 1 single panel = 20” (1’8”)
b. 2 stacked panels = 40” (3’4”)
c. 3 stacked panels = 60” (5’)
A
Stand -mo unted
™
LENRD
First.
Second.
Page 3
Third.
panel over so
female
or
CornerCouplers
panel with an 18”
x 12” Plexiglass window
2. MAX-Wall
CornerCouplers
angle
End Cap
and mix/match the best combinations. We
2. If you need to extend the height of the MAX-Wall
3. A more “curved” environment
to “surround” you beyond
the hole lock in the center
panels are
4. Keep the shipping box
for storage if the MAX-
will be moved around or used intermittently.
Figure 4
Figure 3
Male Female
Figure 2
Page 4
Great gear and great tracks,
BUT
...
BUT...BUT
your mix doesn’t sound the same in the car?
Great gear and great tracks,
Great gear and great tracks,
After 25 years and over 10,000 studios, we’re the experts at
Citywalk Studios • Branson, MO
helping you achieve TOTAL SOUND CONTROL
™
.
or call 1•800•95•WEDGE for your
good as the acoustics in your room!
FREE Room Analysis.
Tune Your Room!
Loading...