Auralex HoverDeck User Manual

HoverDeck
The HoverDeck™ HD-64gig
The HD platforms quickly fasten together with minimal pressure.
USER GUIDE
1.) Assemble the six HD-22 platforms to create a 6’ wide by 4’ deep core deck.
2.) Use the illustration to the right as a guide for proper assembly. Arrange each panels'
location using the numbered stickers on the bottom of each panel. Orient all of the alignment arrows in the same direction noting that panels with exterior edges will not have Hook 'n Loop Fasteners attached.
3.) Place the HD-TC platform as desired behind the core deck to match your set-up.
4.) Place an Auralex HoverMat™ (sold separately) on top of the HoverDeck for added
isolation and slip resistance.
The HoverDeck™ HD-88concert
Includes: (12) HD-TC™ Platforms (23.75” x 31.75” x 1”) (3) ISOPuck™ Feet (1) 10" Loop (1) 10" Hook (3) Skid Strips
The HD plat forms quickly fasten together with minimal pressure.
1.) Assemble the twelve HD-TC platforms to create an 8’ wide by 8’ deep
isolation platform.
6 5 4
1
2 3
123
654
2.) Use the illustration to the right as a guide for proper assembly. Arrange each panels location using the numbered stickers on the bottom of each panel. Orient all of the alignment arrows in the same direction noting that panels with exterior edges will not have Hook 'n Loop Fasteners attached.
3.) Place an Auralex HoverMat™ (sold separately) on top of the HoverDeck for added isolation and slip resistance.
All copyr ightable mater ials are © Copyr ight Auralex Ac oustics, Inc. , 1994-2014. Aur alex, Real-Wor ld Acoustics a nd Total Sound Contro l are registered t rademarks, an d HoverDeck, H D-22, HD-TC and H overMat are tr ademarks of Aur alex Acoustic s, Inc. All right s reserve d. Infringement wi ll be subject to crimina l prosecution. P roudly designed an d manufactured in t he U.S.A.
Auralex® Acoustics, Inc.
1-800-959-3343 / 317-842-2600 / Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
7 8 9
121110
1202-614. HoverDeck I nstruction Guide.indd ( 07/24/2014 - 12:11 PM)
HoverDeck
USER GUIDE
HoverDeck™ Add-On Options: (Sold only in pairs)
(2) HD-2 2™ platforms (23.75” x 23.75” x 1”)
IMPORTANT!:
• The HoverDeck surface is intended for use with rubber stoppers. If you use kick drum spikes or typically need additional materials to keep your drums from moving, consider mounting the additional ISOPucks on top of the HoverDeck as kick drum stops (see picture). Auralex Acoustics does not warranty the surface finish of the HoverDeck from wear and tear caused by drum kit spikes and spurs.
HoverDeck is intended to be used on a hard floor surface or a thin carpet. Heavily padded carpeted surfaces will minimize the purity of sound and structural isolation benefits of your HoverDeck.
Sliding the HoverDeck platforms is not suggested. Simply lift and relocate the HoverDeck platform sections to your desired location.
Do not expose your HoverDeck to prolonged periods of intense, direct sunlight or damp/moist conditions.
Auralex® Acoustics, Inc.
1-800-959-3343 / 317-842-2600 / Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
Loading...