AU Optronics T420HW07 V710 Product Specification

数字签名人林健源

DN：cn=林健源， ou=Shenzhen，dc=com 日期：2010.10.15 09:46:04 +08'00'

T420HW07 V7 Product Specification

Rev. 03

Model Name: T420HW07 V7

Issue Date : 2010/08/23

( )Preliminary Specifications

(＊＊＊＊)Final Specifications

Customer Signature Date AUO Date

Approved By

_________________________________

Note

Approval By PM Director Frank Hsu ____________________________________

Reviewed By RD Director Eugene CC Chen ____________________________________ Reviewed By Project Leader Jimson Jeng ____________________________________

Prepared By PM

Shelby ____________________________________

T420HW07 V7 Product Specification

Rev. 03

Contents

No

CONTENTS

RECORD OF REVISIONS 1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION

3-1 ELECTRIACL CHARACTERISTICS

3-2 INTERFACE CONNECTIONS

3-3 SIGNAL TIMING SPECIFICATION

3-4 SIGNAL TIMING WAVEFORM

3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE

3-7 BACKLIGHT SPECIFICATION 4 OPTICAL SPECIFICATION 5 MECHANICAL CHARACTERISTICS 6 RELIABILITY TEST ITEMS 7 INTERNATIONAL STANDARD

7-1 SAFETY

7-2 EMC 8 PACKING

8-1 DEFINITION OF LABEL

8-2 PACKING METHODS

8-3 PALLET AND SHIPMENT INFORMATION 9 PRECAUTION

9-1 MOUNTING PRECAUTIONS

9-2 OPERATING PRECAUTIONS

9-3 ELECTROSTATIC DISCHARGE CONTROL

9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

9-5 STORAGE

9-6 HANDLING PRECAUTIONS FOR PROTECT FILM

Record of Revision

T420HW07 V7 Product Specification

Rev. 03

Version

0.0 2010/05/21 First Preliminary Spec Release

0.1 2010/05/22

0.2 2010/06/17 2010/06/17 2010/06/17 2010/06/17

0.3 2010/08/23

Date Page Description

16 Update Color Coordinates Gx 0.3 to 0.33 / By 0.05 to 0.04 16 Update Color Coordinates Gx 0.33 to 0.32 / By 0.04 to 0.045

6 Update Backlight Power Consumption typ 100W 13 Update T2 max as 50 ms 14 Inrush Current to 8 17 Update brightness spec typ 400nits / min 350 nits

T420HW07 V7 Product Specification

Rev. 03

1. General Description

This specification applies to the 42.0 inch Color TFT-LCD Module T420HW07 V7. This LCD module has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 42.0 inch. This module supports 1,920x1080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.

The T420HW07 V7 has been designed to apply the 8-bit 4 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.

* General Information

Items Specification Unit Note

Active Screen Size 42.00 inch Display Area 930.24(H) x 523.26(V) mm Outline Dimension 973.2(H) x 566.2 (V) x 22.4(D) mm Driver Element a-Si TFT active matrix Display Colors 8 bit Colors Number of Pixels 1,920x1080 Pixel Pixel Pitch 0.4845 mm Pixel Arrangement RGB vertical stripe Display Operation Mode Normally Black Surface Treatment HC,3H Hard Coating(super clear)

D : Front bezel to T-CON cover

T420HW07 V7 Product Specification

2. Absolute Maximum Ratings

The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit

Item Symbol Min Max Unit Conditions

Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1 Input Voltage of Signal Vin -0.3 4 [Volt] Note 1 Operating Temperature TOP 0 +50 [oC] Note 2 Operating Humidity HOP 10 90 [%RH] Note 2 Storage Temperature TST -20 +60 [oC] Note 2 Storage Humidity HST 10 90 [%RH] Note 2 Panel Surface Temperature PST 65 [oC] Note 3

Note 1: Duration:50 msec. Note 2 : Maximum Wet-Bulb should be 39 and No condensation.℃

Rev. 03

The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ greater than 40 , the wet bulb temperature must not exceed 39 .℃ ℃ Note 3: Surface temperature is measured at 50℃ Dry condition

T420HW07 V7 Product Specification

Rev. 03

3. Electrical Specification

The T420HW07 V7 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second is employed for LED lightbar.

3.1 Electrical Characteristics

Parameter Symbol

Unit Note

Min. Typ. Max LCD Power Supply Input Voltage VDD 10.8 12 13.2 VDC 1 Power Supply Input Current IDD - 1.15 1.27 A 2 Power Consumption PC 13.8 15.2 Watt 2

Value

Inrush Current I

- - 4 A 3

RUSH

Differential Input High Threshold

VTH -- -- +100 mVDC 4

Voltage

LVDS Interface

Differential Input Low Threshold Voltage

Input Common Mode Voltage V

VTL -100 -- -- mVDC 4

1.1 1.25 1.4 VDC 4

ICM

VIH CMOS Interface

Input High Threshold Voltage

(High)

VIL

Input Low Threshold Voltage

2.7 -- 3.3 VDC

0 -- 0.6 VDC

(Low) Backlight Power Consumption PBL Life Time (MTTF) 30000

Note :

1. The ripple voltage should be controlled under 10% of VCC

2. Test Condition:

(1) V

= 12.0V

DD

(2) Fv = Type Timing, 60Hz, 120Hz or Other (3) F

= Max freq.

CLK

(4) Temperature = 25 ℃ (5) Test Pattern : White Pattern

100 106

-- Hours

Watt 5

6

s

µ

3. Measurement condition : Rising time = 400us

90%

T420HW07 V7 Product Specification

Rev. 03

V

DD

GND

10%

400

4. V

5. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At ℃

6. The lifetime(MTTF) is defined as the time which luminance of the LED is 50% compared to its original

= 1.25V

ICM

V

ICM

0V

TH

V

TL

temperatures greater than 40 , the wet bulb temperature must not exceed 39℃ ℃. When operate at high temperatures, the brightness of LED will drop and the life time of LED will be reduced.

value. [Operating condition: Continuous operating at Ta = 25±2℃]

3.2 Interface Connections



LCD connector: 187059-51221 (P-TWO, LVDS connector)



Mating connector:

T420HW07 V7 Product Specification

Rev. 03

1 2

3 4 5 6

Symbol Description PIN

GND Ground 26

NC No connection 27

Reserved AUO Internal Use Only 28 Reserved AUO Internal Use Only 29

NC No connection 30

Reserved AUO Internal Use Only 31 7 LVDS_SEL 8

Reserved 9

Reserved

10 11 12 13 14 15

Reserved

GND Ground 36

CH1_0- LVDS Channel 1, Signal 0-

CH1_0+ LVDS Channel 1, Signal 0+

CH1_1- LVDS Channel 1, Signal 1-

CH1_1+ LVDS Channel 1, Signal 1+

Open/High(3.3V) for NS,

Low(GND) for JEIDA

AUO Internal Use Only AUO Internal Use Only

AUO Internal Use Only

Symbol Description

GND Ground GND Ground

CH2_0- LVDS Channel 2, Signal 0-

CH2_0+ LVDS Channel 2, Signal 0+

CH2_1- LVDS Channel 2, Signal 1-

CH2_1+ LVDS Channel 2, Signal 1+

32 33

34 35

CH2_2- LVDS Channel 2, Signal 2-

CH2_2+ LVDS Channel 2, Signal 2+

GND Ground

CH2_CLK- LVDS Channel 2, Clock -

CH2_CLK+ LVDS Channel 2, Clock + 37 38 39 40

GND Ground

CH2_3- LVDS Channel 2, Signal 3-

CH2_3+ LVDS Channel 2, Signal 3+

Reserved AUO Internal Use Only 16 17 18 19 20 21 22 23 24 25

CH1_2- LVDS Channel 1, Signal 2-

CH1_2+ LVDS Channel 1, Signal 2+

GND Ground

CH1_CLK- LVDS Channel 1, Clock -

CH1_CLK+ LVDS Channel 1, Clock +

GND Ground

CH1_3- LVDS Channel 1, Signal 3-

CH1_3+ LVDS Channel 1, Signal 3+ Reserved AUO Internal Use Only Reserved AUO Internal Use Only

51

41 42 43 44 45 46 47 48 49 50

Reserved AUO Internal Use Only

GND Ground GND Ground GND Ground GND Ground GND Ground

NC No connection

V

DD

V

DD

V

DD

V

DD

Power Supply, +12V DC Regulated Power Supply, +12V DC Regulated Power Supply, +12V DC Regulated

Power Supply, +12V DC Regulated

LVDS Option = High/OpenNS

P re vious C ycle C u rren t C yc le N ext C ycle

C lo ck

T420HW07 V7 Product Specification

Rev. 03

C Hx_ 0 + C Hx_ 0 -

C Hx_ 1 + C Hx_ 1 -

C Hx_ 2 + C Hx_ 2 -

C Hx_ 3 + C Hx_ 3 -

Note: x = 1, 2, 3, 4…

LVDS Option = LowJEIDA

P re vious C ycle C u rren t C ycle N ext C ycle

C lock

R 0R5 G 0G 0R 0R 1 R 2R 3R 4 R1

G 1B0 B 1B 1G 1G2 G3G 4G 5 G2

B2N A D ED EB 2B3 B4B 5N A B3

R 6B7 N AN AR 6R 7 G6G 7B6 R 7

C H x_ 0 + C H x_ 0 -

C H x_ 1 + C H x_ 1 -

C H x_ 2 + C H x_ 2 -

C H x_ 3 + C H x_ 3 -

R 2R7 G 2G 2R 2R 3 R 4R 5R 6 R3

G 3B2 B 3B 3G 3G4 G5G 6G 7 G4

B4N A D ED EB 4B5 B6B 7N A B5

R 0B1 N AN AR 0R 1 G0G 1B0 R 1

Note: x = 1, 2, 3, 4…

G7

AU Optronics T420HW07 V710 Product Specification

Specifications and Main Features

Frequently Asked Questions

User Manual