AU OPTRONICS M270HW01-V2 Product Information

) Preliminary Specification

( V
( ) Final Specification

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

Module

Model Name

Customer Date

Approved by

www.jxlcd.com

www.jxlcd.com

27” Color TFT-LCD

M270HW01 V2

Approved by Date

Winnie Chang

Prepared by

2011/06/02

Note: This Specification is subject to

change without notice.

document version 0.1 1

Hannie Yeh

Desktop Display Business Group /

AU Optronics corporation

2011/06/02

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

Contents

1.0 Handling Precautions .....................................................................................4

2.0 General Description ........................................................................................5

2.1 Display Characteristics....................................................................................................... 5

2.2 Optical Characteristics ....................................................................................................... 6

3.0 Functional Block Diagram ............................................................................ 10

4.0 Absolute Maximum Ratings .........................................................................11

4.1 TFT LCD Module.............................................................................................................. 11

4.2 Backlight Unit ................................................................................................................... 11

4.3 Absolute Ratings of Environment..................................................................................... 11

5.0 Electrical characteristics .............................................................................. 12

5.1 TFT LCD Module.............................................................................................................. 12

5.1.1 Power Specification ...................................................................................................................................... 12

5.1.2 Signal Electrical Characteristics ................................................................................................................... 13

5.2 Backlight Unit ................................................................................................................... 15

6.0 Signal Characteristic.....................................................................................16

6.1 Pixel Format Image .......................................................................................................... 16

6.2 The input data format....................................................................................................... 16

www.jxlcd.com

www.jxlcd.com

6.3 Signal Description ............................................................................................................ 17

6.4 Timing Characteristics...................................................................................................... 19

6.5 Timing diagram ................................................................................................................ 20

6.6 Power ON/OFF Sequence ............................................................................................... 21

7.0 Connector & Pin Assignment....................................................................... 22

7.1 TFT LCD Module.............................................................................................................. 22

7.1.1 Pin Assignment............................................................................................................................................. 22

7.2 Connector on Backlight Unit. ........................................................................................... 23

7.2.1 Pin assignment ............................................................................................................................................. 23

8.0 Reliability Test............................................................................................... 24

9.0 Shipping Label ..............................................................................................25

10.0 Mechanical Characteristics ........................................................................ 26

11. Packing Specification ................................................................................... 28

document version 0.1 2

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

Record of Revision

Version and Date Page

0.1 2011/06/02 First Version

www.jxlcd.com

www.jxlcd.com

Old description New Description Remark

document version 0.1 3

Product Specification

AU OPTRONICS CORPORATION

1.0 Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.

6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.

7) Do not open or modify the Module Assembly.

8) Do not press the reflector sheet at the back of the module to any directions.

9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the

M270HW01 V2

far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.

10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.

11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.

12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.

13) Pls avoid touching COF position while you are doing mechanical design

14) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5℃ and 35℃ at normal humidity.

www.jxlcd.com

www.jxlcd.com

document version 0.1 4

Product Specification

AU OPTRONICS CORPORATION

2.0 General Description

This specification applies to the 27 inch-FHD Color a-Si TFT-LCD Module M270HW01 V2. The
display supports the FHD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). The light source of this TFT-LCD module is W-LED. All input signals are 2-channel
LVDS interface and this module doesn’t contain a driver for backlight.

2.1 Display Characteristics

M270HW01 V2

The following items are characteristics summary on the table under 25℃ condition:

ITEMS Unit SPECIFICATIONS

Screen Diagonal [mm] 685.65(27”)
Active Area [mm] 597.6 (H) x 336.15 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 311.25 (per one triad) ×311.25
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
Contrast Ratio 1000(Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V (Typ)
Power Consumption
(VDD line + LED line)
Weight [Grams] 2860
Physical Size [mm] 630(W) × 368.2(H) × 14.1(D) typ
Electrical Interface Dual channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi-FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance RoHS Compliance
TCO Compliance TCO 03 Compliance

www.jxlcd.com

www.jxlcd.com

[Watt] 27.26 (Typ)

[oC]
[oC]

300 cd/m2 (Typ.)

0 to +50

-20 to +60

document version 0.1 5

2.2 Optical Characteristics

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

The optical characteristics are measured under stable conditions at 25℃:

Item Unit Conditions Min. Typ. Max. Note

Horizontal (Right)
CR = 10 (Left)

Viewing Angle [degree]

Vertical (Up)
CR = 10 (Down)

Contrast ratio Normal Direction

Raising Time (TrR)

Response Time [msec]

Color / Chromaticity
Coordinates (CIE)

www.jxlcd.com

www.jxlcd.com

Color Coordinates (CIE) White

Central Luminance [cd/m2] 240 300 - 6

Luminance Uniformity

Crosstalk (in 60Hz)

Flicker

[%]

[%]

dB

Falling Time (TrF)

Raising + Falling

Gray to Gray(16x16 avg.)

Red x

Red y

Green x

Green y

Blue x

Blue y

White x

White y

600 1000 -

0.612 0.642 0.672

0.315 0.345 0.375

0.292 0.322 0.352

0.601 0.631 0.651

0.124 0.154 0.184

0.022 0.052 0.082

0.283 0.313 0.343

0.299 0.329 0.359

75
75

70
70

-

-

-

75 80

85
85

80
80

3.5 7.4

1.5 2.6

5 10

-

-

-

-

-

1.5 8

-20

2

3

4

5

7

9

document version 0.1 6

Product Specification

Center of the screen

AU OPTRONICS CORPORATION

Note 1: Measurement method

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35 )℃ . In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.

M270HW01 V2

Photo detector

Measured distance

Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°

horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is

www.jxlcd.com

www.jxlcd.com

broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low

(down). The measurement direction is typically perpendicular to the display surface with the

screen rotated about its center to develop the desired measurement viewing angle.

document version 0.1 7

Product Specification

90

1 Frame

AU OPTRONICS CORPORATION

M270HW01 V2

Note 3: Contrast ratio is measured by TOPCON SR-3

Note 4: Definition of Response time measured by Westar TRD-100A

The output signals of photo detector are measured when the input signals are changed from “Full

Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF),

respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of

amplitudes.

%

Optical

Optical

response

response

100

100

10

10

%

White

0

0

T

rF

Black

1 Frame

Black

T

rR

White

TrR + TrF = 5 msec (typ.).
Algorithm:┃Gray Level A – Gray Level B┃≧16, then the average gray to gray response time is 2
ms,
(F= 60 Hz).

Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3

Note 6: Central luminance is measured by TOPCON SR-3

www.jxlcd.com

www.jxlcd.com

Note 7: Luminance uniformity of these 9 points is defined as below and measured by

TOPCON SR-3

Uniformity =

9)-(1 points 9in LuminanceMinimum

9)-(1 Points 9in LuminanceMaximum

document version 0.1 8

Product Specification

Level

DC

AU OPTRONICS CORPORATION

Note 8: Crosstalk is defined as below and measured by TOPCON SR-3

CT = | YB – YA | / YA × 100 (%)

Where

YA = Luminance of measured location without gray level 0 pattern (cd/m2)

YB = Luminance of measured location with gray level 0 pattern (cd/m2)

M270HW01 V2

Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3

G B R G B

R

R G B R G B

www.jxlcd.com

R G B R G B

Method: Record dBV & DC value with TRD-100

Amplitude

www.jxlcd.com

DC

Gray Level = L127

Gray Level = L0

log20(dB)Flicker =

AC

Time

Hz) 30Level(at AC

document version 0.1 9

Backlight

DC

Connector

LVD

S

Y

-

Driver IC

3.0 Functional Block Diagram

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

The following diagram shows the functional block of the 24.0 inch Color TFT-LCD Module:

+5V

LVDS

Receiver

DC/DC

Converter

AUO

ASIC

Correction

Timing

Controller

miniLVDS

Transmitter

Gamma

G1

G1080

TFT-LCD

1920(x3) x 1080

Pixels

D1

D5760

LED

www.jxlcd.com

www.jxlcd.com

I/F + X-PCB

I/F PCB Interface:

JAE-FI-XPB30SRLAHF11
STM- MSCK2407P30
P-TWO- 01-187121-30091-3(A)

Mating Type:

FI-X30HL(Locked Type)

LED Driver on system

document version 0.1 10

Product Specification

AU OPTRONICS CORPORATION

4.0 Absolute Maximum Ratings

Absolute maximum ratings of the module are as following:

4.1 TFT LCD Module

Item Symbol Min Max Unit Conditions

Logic/LCD Drive

Voltage

4.2 Backlight Unit

Item Symbol Min Max Unit Conditions

LED Current ILED

4.3 Absolute Ratings of Environment

Item Symbol Min. Max. Unit Conditions

VDD 0 6.0 [Volt] Note 1,2

120 126

M270HW01 V2

[mA] Note 1,2

Operating Temperature TOP 0 +50 [oC] Note 3

Glass surface temperature

(operation)

Operation Humidity HOP 5 90 [%RH]

Storage Temperature TST -20 +60 [oC]

Storage Humidity HST

Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: Temperature and relative humidity range are shown as the below figure.

1. 90% RH Max ( Ta ≦39℃)

2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃)

3. No condensation

Note 4: Function Judged only

www.jxlcd.com

www.jxlcd.com

TGS 0 +65 [oC] Note 3, Note 4

Note 3

5 90

[%RH]

Operating Range Storage Range

document version 0.1 11

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

5.0 Electrical characteristics

5.1 TFT LCD Module

5.1.1 Power Specification

Input power specifications are as following:

Symbol Parameter Min Typ Max Unit Conditions

VDD

IDD Input Current

Logic/LCD Drive

Voltage

4.5

-

5.0

0.7

5.5

1

[Volt] +/-10%

[A]

VDD= 5.0V, All Black Pattern At
60Hz,

VDD= 5.0V, All Black Pattern At
75Hz,

PDD

IRush Inrush Current

VDDrp

Note 1: Measurement conditions:

The duration of rising time of power input is 470us.

VDD Power

Allowable Logic/LCD
Drive Ripple Voltage

www.jxlcd.com

www.jxlcd.com

-

-

-

3.5 5.5 [Watt] VDD= 5.0V, All Black Pattern At 60Hz

VDD= 5.0V, All Black Pattern At 75Hz

- 2 [A]

- 500 [mV] p-p VDD= 5.0V, All Black Pattern At 75Hz

Note 1

document version 0.1 12

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of

SN75LVDS82DGG (Texas Instruments) in detail.

1. DC Characteristics of each signal are as following:

Symbol Parameter Min Typ Max Units

VTH

VTL

│VID│ Input Differential Voltage 100 - 600 [mV] Note 1

VCM

Differential Input High

Threshold

Differential Input Low

Threshold

Differential Input Common

Mode Voltage

- - +100 [mV]

-100 - - [mV]

+1.0 +1.2 +1.5 [V]

Note 1: LVDS Signal Waveform

www.jxlcd.com

www.jxlcd.com

Condition

VCM = 1.2V

Note 1

V

= 1.2V

CM

Note 1

VTH-VTL = 200MV (max)

Note 1

document version 0.1 13

Freq

F

max

F

center

F

min

F

center

* F

DEV

< Spread Spectrum>

time

2. AC Characteristics

Description Symbol Min Max Unit Note

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

Maximum deviation of input clock

frequency during SSC

Maximum modulation frequency of

input clock during SSC

www.jxlcd.com

www.jxlcd.com

F

DEV

- ± 3 %

F

MOD

- 300 KHz

1

F

MOD

document version 0.1 14

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

5.2 Backlight Unit

Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature):

Symbol Parameter Min.

IR

LED Operation Current - 120

LED

VLB

P

BLU Power consumption (for reference)

BLU

LT

LED life Time (Typical)

LED

Note 1 :The specified current is input LED chip 100% duty current.

Note 2 : The value showed in the table is one light bar’s operation voltage.

Note 3 : Definition of life time : brightness becomes 50% of its original value. The minimum life time of LED unit is on

the condition of IR

Note 4: Each LED light bar consists of 60 pcs LED package ( 4 strings x 15 pcs / string ).

Light Bar Operation Voltage

(for reference)

= 120mA and 25±2℃(Room temperature).

LED

- 49.5 54

- 23.76 27.22 [Watt]

30,000

Typ. Max.

126

- -

Unit Note

[mA]

Note 1

[Volt]

Note 2

[Hour]

Note 3

Operating with fixed

driving current

www.jxlcd.com

www.jxlcd.com

document version 0.1 15

Product Specification

R G B R G B

R G B R G B

R G B R G B

R G B R G B

1 2 1

919 1

920

1st Line

1080

Line

AU OPTRONICS CORPORATION

6.0 Signal Characteristic

6.1 Pixel Format Image

M270HW01 V2

Following figure shows the relationship of the input signals and LCD pixel format.

6.2 The input data format

www.jxlcd.com

www.jxlcd.com

Note 1: R/G/B data 7:MSB, R/G/B data 0:LSB O = “Odd Pixel Data” E = “Even Pixel Data”

document version 0.1 16

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

6.3 Signal Description

The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.

PIN # SIGNAL NAME DESCRIPTION

1 RxOIN0- Negative LVDS differential data input (Odd data)

2 RxOIN0+ Positive LVDS differential data input (Odd data)

3 RxOIN1- Negative LVDS differential data input (Odd data)

4 RxOIN1+ Positive LVDS differential data input (Odd data)

5 RxOIN2- Negative LVDS differential data input (Odd data, DSPTMG)

6 RxOIN2+ Positive LVDS differential data input (Odd data, DSPTMG)

7 GND Power Ground

8 RxOCLK- Negative LVDS differential clock input (Odd clock)

9 RxOCLK+ Positive LVDS differential clock input (Odd clock)

10 RxOIN3- Negative LVDS differential data input (Odd data)

11 RxOIN3+ Positive LVDS differential data input (Odd data)

12 RxEIN0- Negative LVDS differential data input (Even data)

13 RxEIN0+ Positive LVDS differential data input (Even data)

14 GND Power Ground

15 RxEIN1- Positive LVDS differential data input (Even data)

16 RxEIN1+ Negative LVDS differential data input (Even data)

17 GND Power Ground

18 RxEIN2- Negative LVDS differential data input (Even data)

19 RxEIN2+ Positive LVDS differential data input (Even data)

20 RxECLK- Negative LVDS differential clock input (Even clock)

21 RxECLK+ Positive LVDS differential clock input (Even clock)

22 RxEIN3- Negative LVDS differential data input (Even data)

23 RxEIN3+ Positive LVDS differential data input (Even data)

24 GND Power Ground

www.jxlcd.com

www.jxlcd.com

25 NC No connection (for AUO test only. Do not connect)

26 NC No connection (for AUO test only. Do not connect)

27 NC No connection (for AUO test only. Do not connect)

28 VDD Power +5V

29 VDD Power +5V

30 VDD Power +5V

document version 0.1 17

Note1: Start from left side

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

www.jxlcd.com

www.jxlcd.com

Note2: Input signals of odd and even clock shall be the same timing.

document version 0.1 18

Product Specification

AU OPTRONICS CORPORATION

6.4 Timing Characteristics

Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.

Signal Item Symbol Min Typ Max Unit

Vertical

Section

Horizontal

Section

Clock

Period Tv 1088 1130 2047 Th

Active Tdisp(v) 1080 1080 1080 Th

Blanking Tbp(v)+Tfp(v)+PWvs 8 50 967 Th

Period Th 1000 1050 2047 Tclk

Active Tdisp(h) 960 960 960 Tclk

Blanking Tbp(h)+Tfp(h)+PWhs 40 90 1087 Tclk

Period Tclk 25 13.3 11.1 ns

Frequency Freq

40

75

M270HW01 V2

90

MHz

Frame rate Frame rate F 50 60 75 Hz

Note : DE mode only

www.jxlcd.com

www.jxlcd.com

document version 0.1 19

6.5 Timing diagram

Product Specification

M270HW01 V2

AU OPTRONICS CORPORATION

Tv

M pixel

DE

RGB Data

CLK

DE

N

Line

Tblk(v)

Invalid Data

Tclk

Tdisp(v)

Y

Th

N Line

32

LineLine

Th

Tdisp(h)

4

LineLine

N

Line

Invalid Data

Tblk(h)

1

X

RGB Data
(Odd)

RGB Data
(Even)

Pixel

M-7

Pixel

M-6

www.jxlcd.com

www.jxlcd.com

Pixel

Pixel

Pixel

M-5

Pixel

M-3

Pixel

M-2

M-1

Pixel

M

Invalid Data

Invalid Data

Pixel

1

Pixel Pixel

2

Pixel

Pixel

3

5

Pixel

6 M-2

4

Pixel

Pixel

7

Pixel

8 M

Pixel

10

Pixel

119

12

Pixel

M-5

Pixel

M-4

Pixel

M-3

Pixel

Pixel

M-1

PixelPixel

Invalid Data

Invalid Data

Pixel

1

Pixel

2M-4

Pixel

3

Pixel

4

document version 0.1 20

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

6.6 Power ON/OFF Sequence

VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.

Power Supply VDD

Power Supply VDD

LVDS Signal

LVDS Signal

Backlight On

Backlight On

Note : Insert a white pattern after valid data and last until VDD falls to 10%

www.jxlcd.com

www.jxlcd.com

0V

0V

10%

10%

T1

T1

90%

90%

T2

T2

T3

T3

VALID

VALID
DATA

DATA

T4

T4

90%

90%

T5

T5

Note

Note

10%

10%

T6

T6

Parameter

Min. Max.

T1 0.5 10 [msec]

T2 0 50 [msec]

T3 500 - [msec]

T4 200 - [msec]

T5 40 - [msec]

T6 1000 - [msec]

Value

Unit

document version 0.1 21

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

7.0 Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.

7.1 TFT LCD Module

Connector Name / Designation Interface Connector / Interface card

JAE

Manufacturer

Type Part Number

Mating Housing Part Number FI-X30HL (Locked Type)

STM
P-TWO

FI-XPB30SRLAHF11
MSCK2407P30

01-187121-30091-3(A)

7.1.1 Pin Assignment

Pin# Signal Name Pin# Signal Name

1

3

5

7

9

11

13

15

17

19

21

23

25

27

29

RxOIN0-

RxOIN1-

RxOIN2-

GND

RxOCLKIN+

RxOIN3+

RxEIN0+

RxEIN1-

GND

RxEIN2+

RxECLKIN+

RxEIN3+

NC

NC

VDD

www.jxlcd.com

www.jxlcd.com

(for AUO test only. Do not connect)

(for AUO test only. Do not connect)

10

12

14

16

18

20

22

24

26

28

30

2

4

6

8

RxOIN0+

RxOIN1+

RxOIN2+

RxOCLKIN-

RxOIN3-

RxEIN0-

GND

RxEIN1+

RxEIN2-

RxECLKIN-

RxEIN3-

GND

NC

(for AUO test only. Do not connect)

VDD

VDD

document version 0.1 22

Product Specification

AU OPTRONICS CORPORATION

7.2 Connector on Backlight Unit.

M270HW01 V2

This connector is mounted on LED light-bar.

Connector Name / Designation Light Bar Connector

Manufacturer ENTERY INDUSTRIAL CO., LTD

Type Part Number 3707K-Q06N-01R (Locking Type)

7.2.1 Pin assignment

Pin no. Signal name

1 IRLED (current out)

2 IRLED (current out)

3 VLED (voltage in)

4 VLED (voltage in)

5 IRLED (current out)

www.jxlcd.com

www.jxlcd.com

6 IRLED (current out)

document version 0.1 23

8.0 Reliability Test

Product Specification

AU OPTRONICS CORPORATION

M270HW01 V2

Environment test conditions are listed as following table.

Items Required Condition

Temperature Humidity Bias (THB)

High Temperature Operation (HTO)

Low Temperature Operation (LTO)

High Temperature Storage (HTS)

Low Temperature Storage (LTS)

Vibration Test
(Non-operation)

Shock Test
(Non-operation)

Drop Test Height: 46 cm, package test

Ta= 50℃, 80%RH, 300hours

Ta= 50℃, 50%RH, 300hours

Ta= 0℃, 300hours

Ta= 60℃, 300hours

Ta= -20℃, 300hours

Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)

Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)

Note

Thermal Shock Test (TST)

www.jxlcd.com

On/Off Test On/10sec, Off/10sec, 30,000 cycles

ESD (Electro Static Discharge)

Altitude Test

Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from

-20 to 60 , and back again. Power is not applied during the test. After temperature cycling, the ℃ ℃
unit is placed in normal room ambient for at least 4 hours before power on.

Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed

www.jxlcd.com

-20℃/30min, 60℃/30min, 100 cycles

Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.

Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.

Operation:10,000 ft
Non-Operation:30,000 ft

No data lost
Self-recoverable
No hardware failures.

1

2

document version 0.1 24

Product Specification

AU OPTRONICS CORPORATION

9.0 Shipping Label

The label is on the panel as shown below:

Manufactured: XX/XX
Model No: M270HW01 V.2
AU Optronics
Made in XXXXX

M270HW01 V2

Note 1: For Pb Free products, AUO will add for identification.

Note 2: For RoHS compatible products, AUO will add for identification.

Note 3: For China RoHS compatible products, AUO will add for identification.

Note 4: The Green Mark will be presented only when the green documents have been ready by

AUO Internal Green Team.

www.jxlcd.com

www.jxlcd.com

document version 0.1 25

10.0 Mechanical Characteristics

www.jxlcd.com

www.jxlcd.com

Ver 1.2

www.jxlcd.com

www.jxlcd.com

Avoid touching COF position
when doing mechanical design

Ver 1.2

Product Specification

M270HW01 V2

11. Packing Specification

Pallet and shipment information

Item

www.jxlcd.com

www.jxlcd.com

1

2

3

4 Packing Box 7 pcs/Box 715(L)mm x 261(W)mm x 455(H)mm 24.42 with panel & cushion

5

6

Panel 1 630(H)mm x 368.2(V)mm x 14.1(D)mm 2.86

Cushion 1 - 2.97

Box 1 715(L)mm x 261(W)mm x 455(H)mm

Pallet 1 1070(L)mm x 740(W)mm x 138(H)mm

Pallet after

Packing

Q'ty Dimension Weight(kg)

8

boxes/pallet

1070(L)mm x 740(W)mm x 138(H)mm 262.48

Specification

Remark

1.43 without Panel & cushion

12

document version 0.1 28