Product Specification
) Preliminary Specification
(
(V ) Final Specification
Module 27” Color TFT-LCD
AU OPTRONICS CORPORATION
M270HW01 V1
Model Name M270HW01 V1
Customer Date
Approved by
www.jxlcd.com
www.jxlcd.com
Approved by Date
WinnieChang
Prepared by
2009/12/1
Note: This Specification is subject to
change without notice.
M270HW01 V1 version 0.2 1
Paulina Lo
Desktop Display Business Group /
AU Optronics corporation
2009/11/30
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
Contents
1.0 Handling Precautions.............................................................5
2.0 General Description ...............................................................6
2.1 Display Characteristics ................................................................................................................... 6
2.2 Optical Characteristics.................................................................................................................... 7
3.0 Functional Block Diagram ....................................................11
4.1 TFT LCD Module .............................................................................................................................12
4.2 Backlight Unit ................................................................................................................................... 12
4.3 Absolute Ratings of Environment ..................................................................................................... 12
5.0 Electrical characteristics......................................................13
5.1 TFT LCD Module ........................................................................................................................... 13
5.1.1 Power Specification .......................................................................................................................13
5.1.2 Signal Electrical Characteristics .............................................................................................. 14
6.1 Pixel Format Image ....................................................................................................................... 18
6.2 The input data format.................................................................................................................... 18
6.3 Signal Description.......................................................................................................................... 19
6.4 Timing Characteristics ......................................................................................................................20
6.5 Timing diagram............................................................................................................................... 21
6.6 Power ON/OFF Sequence ...........................................................................................................22
7.0 Connector & Pin Assignment................................................23
7.1 TFT LCD Module ........................................................................................................................... 23
7.1.1 Pin Assignment ....................................................................................................... 23
7.2 Backlight Unit ................................................................................................................................. 24
7.2.1 Signal for Lamp connector ........................................................................................ 24
www.jxlcd.com
www.jxlcd.com
8.0 Reliability Test .....................................................................25
9.0 Shipping Label .....................................................................26
10.0 Mechanical Characteristics.................................................27
11. Packing Specification...........................................................28
M270HW01 V1 version 0.2 2
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
Record of Revision
Version and Date Page
0.1 2009/11/30
5
10
Physical Size[mm]
630(W) × 368.2(H) × 16.2(D)typ
I/F PCB Interface:
FI-XB30SSL-HF15 (JAE)
or MSBKT2407P30HB (STM)
Mating Type:
Old description New Description Remark
Physical Size[mm]
630(W) × 368.2(H) × 16.9(D)typ
I/F PCB Interface:
196282-30041 (P-TWO)
or 10630-000000-A2-R
(STARCONN)
FI-X30HL (Locked Type)
22
www.jxlcd.com
www.jxlcd.com
Connector Name / Designation
Interface Connector / Interface card
Manufacturer JAE / STM
Type Part Number
FI-XB30SSRL-HF15 /
MSBKT2407P30HB
Mating Housing Part Number
FI-X30HL (Locked Type)
22
Connector Name / Designation
Lamp Connector / Backlight lamp
Manufacturer CVILUX / YEONHO
Type Part Number CP0502SL090/
35001 HS-02L
Mating Type Part Number
CP0502P1ML0/ 35001 W R-02L
25
Shipping label M270HW01 V1 Shipping label M270HW01 V1
Connector Name/Designation
Interface Connector/Interface card
Manufacturer P-TWO/STARCONN
Type part Number 196282-30041/
10630-000000-A2-R
Connector Name / Designation
Lamp Connector / Backlight lamp
Manufacturer YEONHO
comparable
Type Part Number 35002WR-04L
comparable
Mating Type Part Number
35002WR-04L
or comparable
or
or
Handling Precautions
Handling Precautions
0.2 2010/09/10
M270HW01 V1 version 0.2 3
4
Power Specification
13
Note1:
Q3 A06402
14
Signal Electrical Characteristics
VTH typ +50 mV
VTL typ -50mV
Note 1: LVDS Signal Waveform
15
NA New Add: 2. AC Charteristics
16
Black Unit
CCFL Standard Current (ISCFL)
6.5 mA
CCFL Operation Current (IRCFL)
6.5 mA
CCFL Operation Voltage (VCFL)
993 Volt(@6.5mA)
CCFL Power Consumption (PCFL)
25.8 Watt
Measurement conditions
15) Mechanical design please don’t
touch COF Position.
Power Specification
Note1:
Q2 A06402
Signal Electrical Characteristics
VTH typ 0mV
VTL typ -50mV
Note 1: LVDS Signal Waveform
Black Unit
CCFL Standard Current (ISCFL)
7.0 mA
CCFL Operation Current (IRCFL)
7.0 mA
CCFL Operation Voltage (VCFL)
999 Volt(@7mA)
CCFL Power Consumption (PCFL)
28 Watt
Measurement conditions
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
22
Power ON/OFF Sequence
N0te1: Black pattern
Note2: White pattern
T2 Value: Min-10, Max-50
T3 Value: Min-200
T5 Vaule: Typ.16
T6 Value: Min-0, Max-100
T7 Value: Min-1000
Power ON/OFF Sequence
Cancel Note
T2 value: Min- 0, max-50
T3 Vaule: Min-500
T5 Value: TypT6 Value: Min-1000, Max—
Delete T7
www.jxlcd.com
www.jxlcd.com
M270HW01 V1 version 0.2 4
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the CCFL reflector edge. Instead, press at
the far ends of the CCFL Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
15) Mechanical design please don’t touch COF Position.
www.jxlcd.com
www.jxlcd.com
M270HW01 V1 version 0.2 5
Product Specification
AU OPTRONICS CORPORATION
2.0 General Description
This specification applies to the 27 inch-wide Color a-Si TFT-LCD Module M270HW01.The
display supports the Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). All input signals are 2-channel LVDS interface and this module doesn’t contain an
inverter board for backlight.
2.1 Display Characteristics
M270HW01 V1
The following items are characteristics summary on the table under 25℃ condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 685.65(27”)
Active Area [mm] 597.6 (H) x 336.15 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 311.25 (per one triad) ×311.25
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
Contrast Ratio 1000 (Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V
Power Consumption
(VDD line + CCFL line)
Weight [Grams] 3800 (Typ.)
Physical Size [mm] 630(W) × 368.2(H) × 16.9(D) typ
Electrical Interface Dual channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance RoHS Compliance
TC0’03 Compliance TC0’03 Compliance
www.jxlcd.com
www.jxlcd.com
[Watt] 29.5W (Typ.)
[oC]
[oC]
400 cd/m
(without inverter, all black pattern)
0 to +50
-20 to +60
2
(Typ.)
document version 0.2 6
2.2 Optical Characteristics
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
The optical characteristics are measured under stable conditions at 25℃:
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right)
Viewing Angle [degree]
Contrast ratio Normal Direction 600 1000 -
Response Time [msec]
CR = 10 (Left)
Vertical (Up)
CR = 10 (Down)
Raising Time (TrR)
Falling Time (TrF)
Raising + Falling
Red x
Red y
Color / Chromaticity
Coordinates (CIE)
Green x
Green y
Blue x
Blue y
Color Coordinates (CIE) White
White x
White y
www.jxlcd.com
Central Luminance [cd/m2] 320 400 - 6
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
www.jxlcd.com
[%]
[%]
dB
150 170
140 160
-
-
-
0.616 0.646 0.676
0.308 0.338 0.368
0.260 0.290 0.320
0.576 0.606 0.636
0.115 0.145 0.175
0.041 0.071 0.101
0.283 0.313 0.343
0.299 0.329 0.359
75 80
-
-
-
-
3.8 5.5
1.2 2.5
5 8
-
1.5 8
-20
2
3
4
5
7
9
document version 0.2 7
Product Specification
TFT-LCD Module
LCD Panel
AU OPTRONICS CORPORATION
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35 )℃ . In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.
Photo detector
M270HW01 V1
Measured distance
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the
screen rotated about its center to develop the desired measurement viewing angle.
www.jxlcd.com
www.jxlcd.com
Center of the screen
document version 0.2 8
Product Specification
F
R
F
R
1 Frame
AU OPTRONICS CORPORATION
M270HW01 V1
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TfF),
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
Optical
Optical
response
response
100
100
90
10
10
%
%
W hite
0
0
Tr
Tr
Black
1 Frame
Black
Tr
Tr
W hite
TrR + TfF = 5 msec (typ.).
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
www.jxlcd.com
www.jxlcd.com
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
Uniformity =
9)-(1 points 9in LuminanceMinimum
9)-(1 Points 9in LuminanceMaximum
document version 0.2 9
Product Specification
Level
DC
AU OPTRONICS CORPORATION
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
M270HW01 V1
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
R G B R G B
Gray Level = L127
www.jxlcd.com
R G B R G B
R G B R G B
Method: Record dBV & DC value with TRD-100
Amplitude
www.jxlcd.com
Gray Level = L0
AC
DC
Time
Hz) 30Level(at AC
log20(dB)Flicker =
document version 0.2 10
DC
Connector
LVD
Y
-
Driver IC
LVDS
AUO ASIC
3.0 Functional Block Diagram
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
The following diagram shows the functional block of the 21.5 inch Color TFT-LCD Module:
+5V
LVDS
Receiver
DC/DC
Converter
www.jxlcd.com
www.jxlcd.com
AUO
Timing
Controller
Mini-LVDS
Transmitter
Gamma
Correction
G1
TFT-LCD
G1080
1920(x3) x 1080
Pixels
D1
D5760
4 CCFL
I/F + X-PCB
I/F PCB Interface:
196282-30041 (P-TWO)
or 10630-000000-A2-R (STARCONN)
Inverter
document version 0.2 11
Product Specification
AU OPTRONICS CORPORATION
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive
Voltage
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
CCFL Current ICFL
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP 0 +50 [oC]
VDD 0 5.5 [Volt] Note 1,2
3.0 7.5
[mA] rms Note 1,2
M270HW01 V1
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST
Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
www.jxlcd.com
www.jxlcd.com
5 90
[%RH]
Note 3
Operating Range
document version 0.2 12
Storage Range
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
5.0 Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as following:
Symbol Parameter Min Typ Max Unit Conditions
VDD
IDD Input Current
PDD VDD Power
Logic/LCD Drive
Voltage
4.5 5.0 5.5 [Volt] +/-10%
-
-
0.7 0.85 [A]
3.5 3.8 [Watt]
VDD= 5.0V, All Black Pattern
At 60Hz
VDD= 5.0V, All Black Pattern
At 60Hz
IRush Inrush Current
VDDrp
Allowable Logic/LCD
Drive Ripple Voltage
-
-
- 2.0 [A]
- 300 [mV] p-p
Note 1: Measurement conditions:
The duration of rising time of power input is 470us.
www.jxlcd.com
www.jxlcd.com
Note 1
VDD= 5.0V, All Black Pattern
At 75Hz
document version 0.2 13
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
1. DC Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units
VTH
VTL
│
VID│ Input Differential Voltage 100 - 600 [mV] Note 1
VICM
Differential Input High
Threshold
Differential Input Low
Threshold
Differential Input Common
Mode Voltage
- +100 [mV]
-100 - [mV]
+1.0 +1.2 +1.5 [V]
Note 1: LVDS Signal Waveform
www.jxlcd.com
www.jxlcd.com
Condition
VICM = 1.2V
Note 1
VICM = 1.2V
Note 1
VTH-VTL = 200MV (max)
Note 1
document version 0.2 14
Freq
F
max
F
center
F
min
F
center
* F
DEV
< Spread Spectrum>
time
2. AC Characteristics
Description Symbol Min Max Unit Note
Maximum deviation of input clock
frequency during SSC
Product Specification
AU OPTRONICS CORPORATION
±
F
DEV
-
3
M270HW01 V1
%
Maximum modulation frequency of
input clock during SSC
www.jxlcd.com
www.jxlcd.com
F
MOD
- 200 KHz
1
F
MOD
document version 0.2 15
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
5.2 Backlight Unit
Parameter guideline for CCFL Inverter is under stable conditions at 25 (Room Temperature):℃
Parameter Min. Typ. Max. Unit Note
CCFL Standard Current (ISCFL) 5.5 7.0 7.5 [mA] rms
CCFL Operation Current (IRCFL) 3.0 7.0 7.5 [mA] rms
CCFL Frequency (FCFL) 40 55 60 [KHz]
CCFL Ignition Voltage (ViCFL, Ta= 0 )℃ 2140
CCFL Ignition Voltage (ViCF, Ta= 25 )
℃
CCFL Operation Voltage (VCFL) -
CCFL Power Consumption (PCFL)
CCFL Life Time (LTCFL) 40,000 50,000 - [Hour]
1640 - -
- 28 30.7
- - [Volt] rms
999
(@ 7.0mA)
[Volt] rms
[Volt]
-
rms
[Watt]
2
3, 4
5
6
7
Note 1: Typ. values are AUO recommended design values.
*1 All of characteristics listed are measured under the condition using the AUO test inverter.
*2 It is recommended to check the inverter carefully. Sometimes, interfering noise stripes appear
on the screen, and substandard luminance or flicker at low power may happen.
www.jxlcd.com
www.jxlcd.com
*3 While designing an inverter, it is suggested to check safety circuit very carefully. Impedance of
CCFL, for instance, becomes more than 1 [M ohm] when CCFL is damaged.
*4 Generally, CCFL has certain delay time after applying kick-off voltage. It is recommended to
keep on applying kick-off voltage for 1 [Sec] until discharge.
*5 Reducing CCFL current will increase CCFL discharge voltage and generally increases CCFL
discharge frequency. So all the parameters of the inverter should be carefully designed so the
inverter will not produce too much leakage current from high-voltage output.
*6 Both CCFLs in the CCFL set (2 CCFL lamps on each side of a panel) is designed for identical
phase driving. Reversed phase driving of CCFL set is not encouraged.
*7 For designing CCFL current, it is highly recommanded to use symmetric and consistent
sinusoidal wave for each CCFL input current with asymmetric ration of 10% or less in both
postive area and negative area (ie. 0.9*√2*I
< I1 & I2 < 1.1*√2*I
rms
) as refer to the following
rms
diagram, otherwise proper CCFL functionality cannot be guarantied.
document version 0.2 16
Product Specification
AU OPTRONICS CORPORATION
Note 2: CCFL standard current is measured at 25±2℃.
Note 3: CCFL discharge frequency should be carefully determined to avoid interference between
inverter and TFT LCD.
Note 4: The frequency range will not affect lamp life and reliability characteristics.
Note 5: CCFL inverter should be able to release power that has generating capacity exceeding
1780 volt. Lamp units need minimum voltage, 1780 Volt, for ignition.
Note 6: The variance of CCFL power consumption is ±10%. (IRCFL × VCFL × 4 = PCFL)
Note 7: Definition of life time: brightness becomes 50%. The minimum life time of CCFL unit is on
the condition of 7.5mA CCFL current and 25±2℃.
M270HW01 V1
www.jxlcd.com
www.jxlcd.com
document version 0.2 17
R G B R G B
R G B R G B
R G B R G B
R G B R G B
1 2 1
919 1
920
1st Line
1080
Line
6.0 Signal Characteristic
6.1 Pixel Format Image
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
Following figure shows the relationship of the input signals and LCD pixel format.
6.2 The input data format
www.jxlcd.com
www.jxlcd.com
Note 1: R/G/B data 7:MSB, R/G/B data 0:LSB O = “First Pixel Data” E = “Second Pixel Data”
document version 0.2 18
Product Specification
PIN #
SIGNAL NAME
DESCRIPTION
1 RxOIN0-
Negative LVDS differential data input (Odd data)
2 RxOIN0+ Positive LVDS differential data input (Odd data)
3 RxOIN1-
Negative LVDS differential data input (Odd data)
4 RxOIN1+ Positive LVDS differential data input (Odd data)
5 RxOIN2-
Negative LVDS differential data input (Odd data
,DSPTMG
)
6 RxOIN2+ Posi
tive LVDS differential data input (Odd data
,DSPTMG
)
7 GND
Power Ground
8 RxOC
LK-
Negative LVDS differential clock input (Odd clock)
9 RxOC
LK+
Positive LVDS differential clock input (Odd clock)
10 RxOIN3-
Negative LVDS differential data input (Odd data)
11 RxOIN3+ Positive LVDS differential data input (Odd data)
12 RxEIN0-
Negative LVDS differential data input (Even
data)
13 RxEIN0+ Positive LVDS differential data input (Even data)
14 GND
Power Ground
15 RxEIN1-
Positive LVDS differential data input
(Even data)
16 RxEIN1+ Negative LVDS differential data input (Even data)
17 GND
Power Ground
18 RxEIN2-
Negative LVDS differential data input (Even data)
19 RxEIN2+ Positive LVDS differential data input (Even data)
20 RxEC
LK-
Negative LVDS differenti
al clock input (Even clock)
21 RxEC
LK+
Positive LVDS differential clock input (Even clock)
22 RxEIN3-
Negative LVDS differential data input (Even data)
23 RxEIN3+ Positive LVDS differential data input (Even data)
24 GND
Power Ground
25 NC No connectio
n
(for AUO test only
. Do not connect
)
26 NC No connection
(for AUO test only
. Do not connect
)
27 NC No connection (for AUO test only. Do not connect)
28 VDD
Power
+5V
29 VDD
Power
+5V
30 VDD
Power
+5V
AU OPTRONICS CORPORATION
M270HW01 V1
6.3 Signal Description
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.
www.jxlcd.com
www.jxlcd.com
document version 0.2 19
Note1: Start from left side
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
www.jxlcd.com
Note2: Input signals of odd and even clock shall be the same timing.
6.4 Timing Characteristics
Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.
H-section
V-section
www.jxlcd.com
Item Symbol Min Typ Max Unit
Data CLK
Period Th 1034 1060 2047 [Tclk]
Display Area Tdisp(h) 960 960 960 [Tclk]
Blanking Tblk(h) 74 100 1087 [Tclk]
Period Tv 1088 1120 2047 [Th]
Display Area Tdisp(h) 1080 1080 1080 [Th]
Blanking Tblk(h) 8 40 967 [Th]
Tclk
40
75
90
[MHz]
Frame Rate F 50 60 75 [Hz]
Note : DE mode only
document version 0.2 20
Product Specification
M270HW01 V1
AU OPTRONICS CORPORATION
6.5 Timing diagram
Tblk(v)
DE
RGB Data
N
Line
Invalid Data
CLK
Tclk
www.jxlcd.com
www.jxlcd.com
DE
RGB Data
(Odd)
RGB Data
(Even)
Pixel
M-7
Pixel
M-6
Pixel
M-5
Pixel
Pixel
M-3
Pixel
M-2
Pixel
M-1
Pixel
M
Invalid Data
Invalid Data
document version 0.2 21
Tv
Tdisp(v)
Th
32
LineLine
Th
Tdisp(h)
Pixel
Pixel
10
4
LineLine
Pixel
119
12
1
Pixel
1
Pixel Pixel
2
Pixel
Pixel
3
4
Pixel
7
5
Pixel
Pixel
6 M-2
8 M
N
Line
Pixel
M-5
Pixel
M-4
Pixel
M-3
Pixel
Pixel
M-1
PixelPixel
N Line
Invalid Data
Tblk(h)
Invalid Data
Invalid Data
M pixel
Y
X
Pixel
Pixel
1
3
Pixel
Pixel
4
2M-4
Product Specification
AU OPTRONICS CORPORATION
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
M270HW01 V1
www.jxlcd.com
Parameter
T1 0.5 - 10 [msec]
T2 0 - 50 [msec]
T3 500 - - [msec]
T4 200 - - [msec]
T5 0 - 50 [msec]
T6 1000 - - [msec]
Note：Without panel
www.jxlcd.com
Value
Unit
Min. Typ. Max.
document version 0.2 22
Product Specification
AU OPTRONICS CORPORATION
7.0 Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
Connector Name / Designation Interface Connector / Interface card
Manufacturer P-TWO / STARCONN
Type Part Number 196282-30041/ 10630-000000-A2-R
7.1.1 Pin Assignment
Pin# Signal Name Pin# Signal Name
1 RxOIN0- 2 RxOIN0+
M270HW01 V1
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 GND 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 GND
15 RxEIN1- 16 RxEIN1+
17 GND 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 GND
25 NC
27 NC
29 VDD 30 VDD
www.jxlcd.com
www.jxlcd.com
(for AUO test only. Do not
connect)
connect)
(for AUO test only. Do not
26 NC
connect)
28 VDD
(for AUO test only. Do not
document version 0.2 23
Product Specification
AU OPTRONICS CORPORATION
7.2 Backlight Unit
Physical interface is described as for the connector on module. These connectors are capable of
M270HW01 V1
accommodating the following signals and will be following components.
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer YEONHO or comparable
Type Part Number 35002WR-04L or comparable
Mating Type Part Number 35002WR-04L or comparable
7.2.1 Signal for Lamp connector
Connector No. Pin No. Input Color Function
1 Hot1 Pink High Voltage
2 Cold1 White Low Voltage
1 Hot2 Blue
2 Cold2 Black
Upper
CN1
CN2
www.jxlcd.com
www.jxlcd.com
Connector No. Pin No. Input Color Function
High Voltage
Low Voltage
Lower
CN3
CN4
1 Hot1 Pink High Voltage
2 Cold1 White Low Voltage
1 Hot2 Blue
2 Cold2 Black
High Voltage
Low Voltage
document version 0.2 24
8.0 Reliability Test
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V1
Environment test conditions are listed as following table.
Items Required Condition
Temperature Humidity Bias (THB) Ta= 50 , ℃80%RH, 300hours
High Temperature Operation (HTO) Ta= 50 , ℃50%RH, 300hours
Low Temperature Operation (LTO) Ta= 0 , 300hours℃
High Temperature Storage (HTS) Ta= 60 , 300hours℃
Low Temperature Storage (LTS) Ta= -20 , 300hours℃
Acceleration: 1.5 Grms
Vibration Test
(Non-operation)
Shock Test
(Non-operation)
Drop Test Height: 60 cm, package test
www.jxlcd.com
Thermal Shock Test (TST) -20 /℃30min, 60 /℃30min, 100 cycles
www.jxlcd.com
Wave: Random
Frequency: 10 - 200 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X,
±Y, ±
Z (one time for each Axis)
Note
1
On/Off Test On/10sec, Off/10sec, 30,000 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
8 points, 25 times/ point.
ESD (Electro Static Discharge)
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
8 points, 25 times/ point.
Altitude Test
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed
Operation:10,000 ft
Non-Operation:30,000 ft
No data lost
Self-recoverable
No hardware failures.
2
document version 0.2 25
Product Specification
AU OPTRONICS CORPORATION
9.0 Shipping Label
The label is on the panel as shown below:
Note 1: For Pb Free products, AUO will add for identification.
M270HW01 V.1
M270HW01 V1
Note 2: For RoHS compatible products, AUO will add for identification.
Note 3: For China RoHS compatible products, AUO will add for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
www.jxlcd.com
www.jxlcd.com
document version 0.2 26
10.0 Mechanical Characteristics
www.jxlcd.com
www.jxlcd.com
document version 0.1 27
11. Packing Specification
1. Packing Follow Chart
Module
Paste protect film
Top cover
Put top cover
7PCS/Carton
Paste lamp wire
1pcs Module/ESD
www.jxlcd.com
www.jxlcd.com
2. Pallet and shipment information
Stretch film
Label
Corner angle
Paper Cushion
Paper Carton
H " Tape
Moisture-proof film
PET band
Corner angle
Pallet
Specification
Item
1 Panel 1
2 Cushion 1 - 2.965
3 Box 1 720(L)mm x 264(W)mm x 455(H)mm
4 Packing Box 7 pcs/Box 720(L)mm x 264(W)mm x 455(H)mm
5 Pallet 1
6
Pallet after
Packing
document version 0.1 28
Q'ty Dimension Weight(kg)
2boxes/
pallet
630(H)mm x 368.2(V)mm x
16.2(D)mm
1060(L)mm x 74(W)mm x
13.8(H)mm
1060(L)mm x 74(W)mm x
13.8(H)mm
3.845
1.43 without Panel & cushion
31.31 with panel & cushion
15
265.48
Remark
Loading...