Page 1
Product Specification
) Preliminary Specification
(
(V ) Final Specification
Module 24.0” Color TFT-LCD
AU OPTRONICS CORPORATION
M240HW02 V6
Model Name M240HW02 V6
Customer Date
www.jxlcd.com
www.jxlcd.com
Approved by
Approved by Date
WinnieChang
Prepared by
James Weng
2011/8/31
2011/8/31
Note: This Specification is subject to
change without notice.
Desktop Display Business Group /
AU Optronics corporation
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
1
Page 2
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
Content
1.0 Handling Precautions .............................................................4
2.0 General Description................................................................4
2.1 Display Characteristics........................................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................................6
3.0 Functional Block Diagram.....................................................10
4.0 Absolute Maximum Ratings ..................................................11
4.1 TFT LCD Module............................................................................................................................................... 11
4.2 Backlight Unit .................................................................................................................................................... 11
4.3 Absolute Ratings of Environment ...................................................................................................................... 11
5.0 Electrical characteristics ......................................................12
5.1 TFT LCD Module...............................................................................................................................................12
5.1.1 Power Specification .............................................................................................. 12
5.2 Backlight Unit .................................................................................................................................................... 15
6.0 Signal Characteristic ............................................................16
6.1 Pixel Format Image...........................................................................................................................................16
6.2 The input data format........................................................................................................................................16
6.3 Signal Description .............................................................................................................................................16
6.4 Timing Characteristics.......................................................................................................................................18
6.5 Timing diagram .................................................................................................................................................20
www.jxlcd.com
6.6 Power ON/OFF Sequence................................................................................................................................21
www.jxlcd.com
7.0 Connector & Pin Assignment ................................................22
7.1 TFT LCD Module...............................................................................................................................................22
7.1.1 Pin Assignment.................................................................................................... 22
7.2 Connector on Backlight Unit..............................................................................................................................23
7.2.1 Pin assignment.................................................................................................... 23
9.0 Shipping Label......................................................................25
10.0 Mechanical Characteristics .................................................26
11.0 Packing Specification .........................................................28
11.1Packing Flow ....................................................................................................................................................28
11.2 Pallet and Shipment Information .....................................................................................................................29
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
2
Page 3
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
Record of Revision
Version and Date Page
1.0 2011/7/20 6 Blank Add R,G,B Chromaticity
1.0 2011/7/20 11 NA Add glass surface temperature
1.0 2011/7/20 17 Pin 27: VDD Pin 27: NC
1.0 2011/7/20 19 Data CLK=83 MHz Data CLK=90 MHz
1.0 2011/7/20 22 Pin 27: VDD Pin 27: NC
1.0 2011/7/20 23 NA Add connector dimension
1.1 2011/8/31 15 Light Bar Operation Voltage
min=40.6, typ=45.5, max=49
1.1 2011/8/31 22 LVDS CNT: Starconn
093F30-00T01A-M4
Old description New Description Remark
Light Bar Operation Voltage
min=42, typ=45.5, max=50.4
LVDS CNT: JAE
FI-XPB30SRLAHF11
www.jxlcd.com
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
3
Page 4
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of LED light bar edge. Instead, press at the far
ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
www.jxlcd.com
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Avoid touching COF position while doing mechanical design.
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2012/5/8
2.0 General Description
This specification applies to the 24 inch-wide Color TFT-LCD Module M240HW02. The display
document version 1.1
4
Page 5
Product Specification
supports the Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bits data). All
input signals are dual channel LVDS interface and this module doesn’t contain an inverter board
for backlight.
AU OPTRONICS CORPORATION
M240HW02 V6
2.1 Display Characteristics
The following items are characteristics summary on the table under 25℃ condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 609.7(24.0”)
Active Area [mm] 531.36 (H) x 298.89 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 276.75 (per one triad) ×276.75
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode VA Mode, Normally Black
2
White Luminance ( Center ) [cd/m2]
Contrast Ratio 5000 (Typ.)
Optical Response Time [msec] 12ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V
Power Consumption
(VDD line + LED line)
Weight [g] 2050 (Typ.)
Physical Size [mm] 556.0 (W) x 323.2 (H) x 11.5 (D) typ
Electrical Interface Dual channel LVDS
www.jxlcd.com
www.jxlcd.com
[Watt]
250 cd/m
26.3(Typ.)
(without inverter, all white pattern)
(Typ.)
Support Color 16.7M colors (RGB 8-bit)
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance RoHS Compliance
TCO Compliance TCO 5.1 Compliance
[oC]
[oC]
0 to +50
-20 to +60
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
5
Page 6
Product Specification
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃:
Item Unit Conditions Min. Typ. Max. Note
Viewing Angle [degree]
Contrast ratio Normal Direction
AU OPTRONICS CORPORATION
Horizontal (Right)
CR = 10 (Left)
Vertical (Up)
CR = 10 (Down)
Raising Time (TrR) - 7 9
150
150
3000 5000 - 3
M240HW02 V6
178
178
-
-
-
-
2
Response Time [msec]
Color / Chromaticity
Coordinates (CIE)
Color Coordinates (CIE) White
Central Luminance [cd/m2]
Luminance Uniformity [%] 75 80 - 7
Crosstalk (in 60Hz) [%] 1.5 8
www.jxlcd.com
www.jxlcd.com
Flicker dB -20 9
Falling Time (TrF) - 5 7
Raising + Falling - 12 16
Red x
Red y 0.304 0.334 0.364
Green x 0.304 0.334 0.364
Green y 0.594 0.624 0.654
Blue x 0.122 0.152 0.182
Blue y 0.020 0.050 0.080
White x 0.283 0.313 0.343
White y 0.299 0.329 0.359
0.612 0.642 0.672
200 250 - 6
4
5
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
6
Page 7
Product Specification
M
easured distance
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35 )℃ . In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.
AU OPTRONICS CORPORATION
Photo detector
M240HW02 V6
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the screen
rotated about its center to develop the desired measurement viewing angle.
LCD Panel
Center of the screen
www.jxlcd.com
www.jxlcd.com
TFT-LCD Module
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
7
Page 8
Product Specification
F
R
F
R
1 Fra me
AU OPTRONICS CORPORATION
M240HW02 V6
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, Tr
), and from “Full White” to “Full Black” (falling time, TfF),
R
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
Optical
Optical
resp on se
resp on se
100
100
90
10
10
%
%
White
0
0
Tr
Tr
Black
1 Fra me
Black
Tr
Tr
White
TrR + TfF = 25 msec (typ.).
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
www.jxlcd.com
www.jxlcd.com
Uniformity =
9)-(1 points 9in LuminanceMinimum
9)-(1 Points 9in LuminanceMaximum
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
8
Page 9
Product Specification
Level
DC
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
AU OPTRONICS CORPORATION
M240HW02 V6
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
R G B R G B
Gray Level = L127
R G B R G B
www.jxlcd.com
R G B R G B
Method: Record dBV & DC value with TRD-100
Amplitude
www.jxlcd.com
DC
Gray Level = L0
log20(dB)Flicker =
AC
Time
Hz) 30Level(at AC
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
9
Page 10
Product Specification
Backlight
DC
Connect
or
LVD
S
X-Driver IC
Y
-
Driver IC
AU OPTRONICS CORPORATION
M240HW02 V6
3.0 Functional Block Diagram
The following diagram shows the functional block of the 24.0 inch Color TFT-LCD Module:
+5V
DC/DC
Converter
www.jxlcd.com
www.jxlcd.com
AUO
ASIC
LVDS
Receiver
Correction
I/F + X-PCB
Timing
Controller
miniLVDS
Transmitter
Gamma
G1
TFT-LCD
1920(x3) x 1080
Pixels
D1
LED
I/F PCB Interface:
01-187121-30091-3
093F30-00T01A-M4
Mating Type:
FI-X30HL(Locked Type)
AUO Confidential For STAR Internal Use Only / 2012/5/8
LED Driver on system
document version 1.1
10
Page 11
Product Specification
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module are as follows:
4.1 TFT LCD Module
Item
Logic/LCD Drive
Symbo
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
LED Current ICFL
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
AU OPTRONICS CORPORATION
Min Max Unit
VDD 0 6.0 [Volt] Note 1,2
- 120
M240HW02 V6
Condition
[mA] Note 1,2
Operating Temperature TOP 0 +50 [oC]
Glass surface
temperature (operation)
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST 5 90 [%RH]
Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: Temperature and relative humidity range are shown as the below figure.
1. 90% RH Max ( Ta ≦39℃)
2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃)
3. No condensation
Note 4: Function judged only
www.jxlcd.com
www.jxlcd.com
TGS 0 +65 [oC]
Note 3
Note 3, Note 4
Note 3
Operating Range Storage Range
document version 1.1
AUO Confidential For STAR Internal Use Only / 2012/5/8
11
Page 12
Product Specification
white
5.0 Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows:
AU OPTRONICS CORPORATION
M240HW02 V6
Symbol
VDD
IDD1 Input Current -
IRush Inrush Current - - 3 [A]
VDDrp
Note 1: Measurement conditions:
The duration of rising time of power input is 470 us.
Parameter Min Typ Max Unit Conditions
Logic/LCD Drive
Voltage
Allowable Logic/LCD
Drive Ripple Voltage
www.jxlcd.com
www.jxlcd.com
4.5 5.0 5.5 [Volt] +/-10%
0.9 1.2 [A]
0.95 1.27
4.5 6 [Watt]
4.75 6.35
- - 500 [mV] p-p
VDD= 5.0V,All
white Pattern, At 60 Hz
VDD= 5.0V,All
white Pattern, At 75Hz
VDD=
5.0V,All white Pattern, At
60Hz PDD1 VDD Power -
VDD= 5.0V,All
white
Pattern, At 75Hz
Note 1
VDD= 5.0V, All
Pattern At 60Hz
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
12
Page 13
Product Specification
VICM = 1.2V
AU OPTRONICS CORPORATION
M240HW02 V6
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
1. Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units
VTH
VTL
│VID│
VICM
Differential Input High
Threshold
Differential Input Low
Threshold
Input Differential
Voltage
Differential Input
Common Mode Voltage
- +50- +100
-100 --50 -
100 - 600
+1.0 +1.2 +1.5
Note 1: LVDS Signal Waveform
www.jxlcd.com
www.jxlcd.com
Condition
[mV]
[mV]
[mV] Note 1
[V]
VICM = 1.2V
Note 1
VTH-VTL = 200MV (max)
Note 1
Note 1
document version 1.1
AUO Confidential For STAR Internal Use Only / 2012/5/8
13
Page 14
2. AC Characteristics
Freq
F
max
F
center
F
min
F
center
* F
DEV
< Spread Spectrum>
time
Description Symbol Min Max Unit Note
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
Maximum deviation of input
clock frequency during SSC
Maximum modulation frequency
of input clock during SSC
FDEV -
FMOD - 200 KHz
±±±± 3
%
1
FMOD
www.jxlcd.com
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
14
Page 15
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
5.2 Backlight Unit
Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature):
Symbol Parameter Min.
IR
LED Operation Current - 110
LED
VLB
P
BLU Power consumption (for reference)
BLU
Light Bar Operation Voltage
(for reference)
Typ. Max.
120
42 46.2 50.4
17.9 20.02
Unit Note
[mA]
Note 1
[Volt]
Note 2
[Watt]
Note 3
Operating with fixed
driving current
LT
LED life Time (Typical)
LED
Note 1 :The specified current is input LED chip 100% duty current.
Note 2 : The value showed in the table is one light bar’s operation voltage.
Note 3 : Based on the operating current is 110mA.
Note 4: Each LED light bar consists of 56 pcs LED package ( 4 strings x 14 pcs / string )
www.jxlcd.com
www.jxlcd.com
30,000
-
[Hour]
Note 4
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
15
Page 16
Product Specification
R G B R G B
R G B R G B
R G B R G B
R G B R G B
1 2 1
919 1
920
1st Line
1080
Line
6.0 Signal Characteristic
6.1 Pixel Format Image
AU OPTRONICS CORPORATION
M240HW02 V6
Following figure shows the relationship of the input signals and LCD pixel format.
6.2 The input data format
www.jxlcd.com
www.jxlcd.com
Note 1: R/G/B data 7:MSB, R/G/B data 0:LSB O = “Odd Pixel Data” E = “Even Pixel Data”
AUO Confidential For STAR Internal Use Only / 2012/5/8
6.3 Signal Description
document version 1.1
16
Page 17
Product Specification
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.
PIN # SIGNAL NAME
1 RxOIN0- Negative LVDS differential data input (Odd data)
2 RxOIN0+ Positive LVDS differential data input (Odd data)
3 RxOIN1- Negative LVDS differential data input (Odd data)
4 RxOIN1+ Positive LVDS differential data input (Odd data)
5 RxOIN2- Negative LVDS differential data input (Odd data, DSPTMG)
6 RxOIN2+ Positive LVDS differential data input (Odd data, DSPTMG)
7 GND Power Ground
8 RxOCLK- Negative LVDS differential clock input (Odd clock)
9 RxOCLK+ Positive LVDS differential clock input (Odd clock)
10 RxOIN3- Negative LVDS differential data input (Odd data)
11 RxOIN3+ Positive LVDS differential data input (Odd data)
AU OPTRONICS CORPORATION
DESCRIPTION
M240HW02 V6
12 RxEIN0- Negative LVDS differential data input (Even data)
13 RxEIN0+ Positive LVDS differential data input (Even data)
14 GND Power Ground
15 RxEIN1- Positive LVDS differential data input (Even data)
16 RxEIN1+ Negative LVDS differential data input (Even data)
17 GND Power Ground
18 RxEIN2- Negative LVDS differential data input (Even data)
19 RxEIN2+ Positive LVDS differential data input (Even data)
20 RxECLK- Negative LVDS differential clock input (Even clock)
21 RxECLK+ Positive LVDS differential clock input (Even clock)
22 RxEIN3- Negative LVDS differential data input (Even data)
23 RxEIN3+ Positive LVDS differential data input (Even data)
24 GND Power Ground
25 NC No connection (for AUO test only. Do not connect)
26 NC No connection (for AUO test only. Do not connect)
27 NC NA
28 VDD Power +5V
29 VDD Power +5V
www.jxlcd.com
www.jxlcd.com
30 VDD Power +5V
Note1: Start from left side
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
17
Page 18
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
www.jxlcd.com
www.jxlcd.com
Note2: Input signals of odd and even clock shall be the same timing.
AUO Confidential For STAR Internal Use Only / 2012/5/8
6.4 Timing Characteristics
document version 1.1
18
Page 19
Product Specification
Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.
Item Symbol Min Typ Max Unit
Data CLK
Period Th 1004 1060 2047 [Tclk]
AU OPTRONICS CORPORATION
Tclk
40
72
90
Note 2
M240HW02 V6
[MHz]
H-section
V-section
Frame Rate F 50 60 75 [Hz]
Note1 : DE mode only
Note2 : Spread spectrum on customers’ side included
Display Area
Blanking Tblk(h) 74 100 1087 [Tclk]
Period Tv 1088 1120 2047 [Th]
Display Area
Blanking Tblk(v) 8 40 967 [Th]
www.jxlcd.com
www.jxlcd.com
Tdisp(h) 960 960 960 [Tclk]
Tdisp(v) 1080 1080 1080 [Th]
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
19
Page 20
6.5 Timing diagram
Product Specification
AU OPTRONICS CORPORATION
Tv
M240HW02 V6
M pixel
DE
RGB Data
CLK
DE
N
Line
Invalid Data
Tclk
Tblk(v)
Tdisp(v)
Y
Th
N Line
4
1
32
LineLine
Th
Tdisp(h)
LineLine
N
Line
Invalid Data
Tblk(h)
X
RGB Data
(Odd)
RGB Data
(Even)
Pixel
M-7
Pixel
M-6
www.jxlcd.com
www.jxlcd.com
Pixel
M-5
Pixel
Pixel
M-3
Pixel
M-2
Pixel
M-1
Pixel
M
Invalid Data
Invalid Data
Pixel
Pixel
1
3
Pixel Pixel
4
2
Pixel
Pixel
5
7
Pixel
Pixel
8 M
6 M-2
Pixel
Pixel
10
Pixel
119
12
Pixel
M-5
Pixel
M-4
Pixel
M-3
Pixel
Pixel
M-1
PixelPixel
Invalid Data
Invalid Data
Pixel
Pixel
Pixel
1
3
Pixel
4
2M-4
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
20
Page 21
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
www.jxlcd.com
www.jxlcd.com
Parameter
T1 0.5 10 [msec]
T2 0 50 [msec]
T3 500 - [msec]
T4 200 - [msec]
T5 0 50 [msec]
T6 1000 - [msec]
Value Unit
Min. Max.
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
21
Page 22
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
7.0 Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
Connector Name / Designation Interface Connector / Interface card
Manufacturer
Type Part Number
Mating Housing Part Number FI-X30HL (Locked Type)
7.1.1 Pin Assignment
Pin# Signal Name Pin# Signal Name
1 RxOIN0- 2 RxOIN0+
3 RxOIN1- 4 RxOIN1+
P-TWO
JAE
01-187121-30091-3
FI-XPB30SRLAHF11
5 RxOIN2- 6 RxOIN2+
7 GND 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 GND
15 RxEIN1- 16 RxEIN1+
17 GND 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 GND
25
27
29 VDD 30 VDD
www.jxlcd.com
www.jxlcd.com
NC (for AUO test only. Do not
connect)
NC (for AUO test only. Do not
connect)
26
28 VDD
NC (for AUO test only. Do not
connect)
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
22
Page 23
Product Specification
7.2 Connector on Backlight Unit.
AU OPTRONICS CORPORATION
M240HW02 V6
This connector is mounted on LED light-bar.
Connector Name / Designation Light Bar Connector
Manufacturer Entery
Type Part Number 3707K-Q06N-01
7.2.1 Pin assignment
Pin no. Signal name
1 IRLED (current out)
2 IRLED (current out)
3 VLED (voltage in)
4 VLED (voltage in)
5 IRLED (current out)
6 IRLED (current out)
7.2.2 Connector dimension
H x V x D =13.9 x 3.00 x 4.25, Pitch=1.0 (unit=mm)
www.jxlcd.com
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
23
Page 24
Product Specification
AU OPTRONICS CORPORATION
M240HW02 V6
8.0 Reliability Test
Environment test conditions are listed as following table.
Items Required Condition Note
Temperature Humidity Bias (THB) Ta= 50 , ℃ 80%RH, 300hours
High Temperature Operation (HTO) Ta= 50 , ℃ 50%RH, 300hours
Low Temperature Operation (LTO) Ta= 0 , 300hours℃
High Temperature Storage (HTS) Ta= 60 , 300hours℃
Low Temperature Storage (LTS) Ta= -20 , 300hours℃
Acceleration: 1.5 Grms
Vibration Test
(Non-operation)
Shock Test
(Non-operation)
Drop Test Height: 46 cm, package test
Thermal Shock Test (TST) -20 /℃ 30min, 60 /℃ 30min, 100 cycles
On/Off Test On/10sec, Off/10sec, 30,000 cycles
www.jxlcd.com
www.jxlcd.com
ESD (Electro Static Discharge)
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.
1
2
Altitude Test
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed
Operation:10,000 ft
Non-Operation:30,000 ft
No data lost
Self-recoverable
No hardware failures.
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
24
Page 25
Product Specification
AU Optronics
9.0 Shipping Label
The label is on the panel as shown below:
AU OPTRONICS CORPORATION
M240HW02 V6
Manufactured XX/XX
Model No: M240HW02 V6
Note 1: For Pb Free products, AUO will add
Note 2: For RoHS compatible products, AUO will add
Note 3: For China RoHS compatible products, AUO will add
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
www.jxlcd.com
www.jxlcd.com
for identification.
for identification.
for identification.
document version 1.1
AUO Confidential For STAR Internal Use Only / 2012/5/8
25
Page 26
1
M240HW02 V6
www.jxlcd.com
www.jxlcd.com
AU OPTRONICS CORPORATION
Product Specification
AUO Confidential For STAR Internal Use Only / 2012/5/8
10.0 Mechanical Characteristics
document version 1.1
Page 27
1
M240HW02 V6
www.jxlcd.com
www.jxlcd.com
AU OPTRONICS CORPORATION
Product Specification
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
Page 28
Product Specification
”
H ” Tape
11.0 Packing Specification
11.1Packing Flow
AU OPTRONICS CORPORATION
M240HW02 V6
Module
Paste protect film
Paste lamp wire
1pcs Module/ESD
www.jxlcd.com
Top cover
Put top cover
10 pcs/carton
Cushion
Carton
www.jxlcd.com
Corner angle
Stretch film
Label
Moisture-proof film
PET band
Corner angle
Pallet
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
1
Page 29
Product Specification
without Panel & cushion
with panel & cushion
11.2 Pallet and Shipment Information
Item
Q'ty Dimension Weight(kg)
AU OPTRONICS CORPORATION
M240HW02 V6
Specification
Remark
1 Panel
2 Cushion
3 Box
4 Packing Box
5 Pallet
6 Pallet after Packing
Note 1: Estimated value which is subject to change based on real measured data.
1 556(H)mm x 323.2(V)mm x 11.5(D)mm
1 -- 1.7
1 406(L)mm x 281(W)mm x 651(H)mm 1.2
10 pcs/Box
1 1140(L)mm x 830(W)mm x 138(H)mm
16
boxes/pallet
406(L)mm x 281(W)mm x 651(H)mm 21.4
1140(L)mm x 830(W)mm x 142.2(H)mm
www.jxlcd.com
www.jxlcd.com
2.05
12
354.4
Note 1
Note 1
Note 1
Note 1
Note 1
AUO Confidential For STAR Internal Use Only / 2012/5/8
document version 1.1
29
Loading...