Page 1
Product Specification
) Preliminary Specification
(
( V) Final Specification
Module 24” Color TFT-LCD
AU OPTRONICS CORPORATION
M240HW01 V8
Model Name M240HW01 V8
Customer Date
Approved by
www.jxlcd.com
www.jxlcd.com
Approved by Date
Frankie Wang
Prepared by
2011/7/01
Note: This Specification is subject to
change without notice.
CJH
Desktop Display Business Group /
AU Optronics corporation
2011/7/01
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 0.1 1
Page 2
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
Contents
1.0 Handling Precautions............................................................. 4
2.0 General Description ............................................................... 5
2.1 Display Characteristics....................................................................................................................5
2.2 Optical Characteristics ....................................................................................................................6
3.0 Functional Block Diagram .................................................... 10
4.0 Absolute Maximum Ratings......................................................... 11
4.1 TFT LCD Module..............................................................................................................................11
4.2 Backlight Unit.................................................................................................................................... 11
4.3 Absolute Ratings of Environment ......................................................................................................11
5.0 Electrical characteristics...................................................... 12
5.1 TFT LCD Module............................................................................................................................ 12
5.1.1 Power Specification.............................................................................................. 12
5.1.2 Signal Electrical Characteristics.............................................................................. 13
5.2 Backlight Unit.................................................................................................................................... 15
6.0 Signal Characteristic............................................................ 16
6.1 Pixel Format Image........................................................................................................................16
6.2 The input data format .................................................................................................................... 17
6.3 Signal Description..........................................................................................................................18
6.4 Timing Characteristics .......................................................................................................................21
6.5 Timing diagram...............................................................................................................................22
6.6 Power ON/OFF Sequence ...........................................................................................................23
www.jxlcd.com
www.jxlcd.com
7.0 Connector & Pin Assignment ............................................... 24
7.1 TFT LCD Module............................................................................................................................ 24
7.1.1 Pin Assignment ................................................................................................... 24
7.2 Connector on Backlight Unit.............................................................................................................. 26
7.2.1 Pin assignment ................................................................................................... 26
8.0 Reliability Test..................................................................... 27
9.0 Shipping Label ..................................................................... 28
10.0 Mechanical Characteristics ................................................ 29
11. Packing Specification........................................................... 32
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 0.1 2
Page 3
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
Record of Revision
Version and Date Page
0.1
2011/03/15
0.2
2011/6/24
12 2D/3D switch voltage define remove
First Version
20,26
Pin1 : 2D/3D switch Pin1 : NC
Old description New Description Remark
www.jxlcd.com
www.jxlcd.com
document version 0.1 3
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 4
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the
far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
www.jxlcd.com
Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Pls avoid touching COF position while you are doing mechanical design
14) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5555℃℃℃℃ and 35
www.jxlcd.com
and 35℃℃℃℃ at normal humidity.
and 35 and 35
AUO Confidential For STAR Internal Use Only / 2011/12/13
at normal humidity.
at normal humidity. at normal humidity.
document version 0.1 4
Page 5
Product Specification
AU OPTRONICS CORPORATION
2.0 General Description
This specification applies to the 24 inch-FHD Color a-Si TFT-LCD Module M240HW01. The
display supports the FHD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). The light source of this TFT-LCD module is W-LED. All input signals are 4-channel
LVDS interface and this module doesn’t contain a driver for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25℃ condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 609.7(24.0”)
Active Area [mm] 531.36 (H) x 298.89 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 276.75 (per one triad) ×276.75
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
Contrast Ratio 1000 (Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V (Typ)
Power Consumption
(VDD line + LED line)
Weight [Grams] 2200 Typ.
Physical Size [mm] 556.0(H)x323.2(V)x14.4(D)
Electrical Interface 4 channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance RoHS Compliance
TCO Compliance TCO 5.1 Compliance
www.jxlcd.com
www.jxlcd.com
350 cd/m2 (Typ.)
[Watt] PCBA:7.25W
BL : 19.71W
[oC]
[oC]
0 to +50
-20 to +60
M240HW01 V8
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 5
Page 6
2.2 Optical Characteristics
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
The optical characteristics are measured under stable conditions at 25℃:
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right)
CR = 10 (Left)
Viewing Angle [degree]
Vertical (Up)
CR = 10 (Down)
Contrast ratio Normal Direction
Raising Time (TrR)
Response Time [msec]
Color / Chromaticity
Coordinates (CIE)
www.jxlcd.com
www.jxlcd.com
Color Coordinates (CIE) White
Central Luminance [cd/m2] 300 350 - 6
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
[%]
[%]
dB
Falling Time (TrF)
Raising + Falling
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
75
75
70
70
600
0.620 0.650 0.680
0.299 0.329 0.359
0.301 0.331 0.361
0.592 0.622 0.652
0.121 0.151 0.181
0.023 0.053 0.083
0.283 0.313 0.343
0.299 0.329 0.359
75 80
85
85
80
80
1000 -
-
-
-
3.5 7.4
1.5 2.6
5 10
-
-
-
-
-
1.5 8
-20
2
3
4
5
7
9
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 6
Page 7
Center of the screen
Note 1: Measurement method
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.
)
. In order to stabilize the luminance, the
Photo detector
Measured distance
www.jxlcd.com
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the screen
rotated about its center to develop the desired measurement viewing angle.
www.jxlcd.com
document version 1.4 7
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 8
Product Specification
100
90
10
0
response
T
100
10
0
response
1 Frame
1 Frame
T
AU OPTRONICS CORPORATION
M240HW01 V8
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF),
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
%
Optical
Optical
%
White
rF
Black
Black
rR
White
TrR + TrF = 5 msec (typ.).
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
www.jxlcd.com
www.jxlcd.com
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
AUO Confidential For STAR Internal Use Only / 2011/12/13
Uniformity =
document version 1.4 8
9)-(1 points 9in LuminanceMinimum
9)-(1 Points 9in LuminanceMaximum
Page 9
Product Specification
Level
DC
AU OPTRONICS CORPORATION
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
M240HW01 V8
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
G B R G B
R
R G B R G B
www.jxlcd.com
R G B R G B
Method: Record dBV & DC value with TRD-100
Amplitude
www.jxlcd.com
DC
Gray Level = L127
Gray Level = L0
log20(dB)Flicker =
AC
Time
Hz) 30Level(at AC
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 9
Page 10
Backlight
DC
Connector
LVD
S
Y
-
Driver IC
Connector
3.0 Functional Block Diagram
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
The following diagram shows the functional block of the
+5V
LVDS
Receiver
DC/DC
Converter
AUO
ASIC
Timing
Controller
miniLVDS
Transmitter
Gamma
Correction
24.0 inch Color TFT-LCD Module:
G1
TFT-LCD
1920(x3) x 1080
Pixels
G1080
D1
D5760
LED
www.jxlcd.com
www.jxlcd.com
I/F PCB Interface:
185132-15021/P-two
Mating Type:
12507HS-15L/Yeon Ho
I/F + X-PCB
LED Driver on system
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 10
Page 11
Product Specification
AU OPTRONICS CORPORATION
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive
Voltage
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
LED Current ILED
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
VDD 0 6.0 [Volt] Note 1,2
- 120
M240HW01 V8
[mA] Note 1,2
Operating Temperature TOP 0 +50 [oC] Note 3
Glass surface temperature
(operation)
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
www.jxlcd.com
Storage Humidity HST
Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: Temperature and relative humidity range are shown as the below figure.
1. 90% RH Max ( Ta ≦39℃)
2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃)
3. No condensation
Note 4: Function Judged only
www.jxlcd.com
TGS 0 +65 [oC] Note 3, Note 4
Note 3
5 90
[%RH]
AUO Confidential For STAR Internal Use Only / 2011/12/13
Operating Range Storage Range
document version 1.4 11
Page 12
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
5.0 Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as following:
Symbol Parameter Min Typ Max Unit Conditions
VDD LCD Drive Voltage
IDD Input Current
PDD
VDD Power
4.5
-
-
5.0
1.45
7.25 8.7 [Watt]
5.5
1.74
[Volt] +/-10%
[A]
VDD= 5.0V,All Black Pattern,
At 120Hz
VDD= 5.0V,All Black Pattern,
At 120Hz
IRush Inrush Current
VDDrp
INote 1: Measurement conditions:
The duration of rising time of power input is 470us.
Allowable Logic/LCD
Drive Ripple Voltage
www.jxlcd.com
www.jxlcd.com
-
-
- 3 [A] Note 1
- 500 [mV] p-p
VDD= 5.0V, All Black Pattern
At 120Hz
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 12
Page 13
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
1. DC Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units
VTH
VTL
│VID│ Input Differential Voltage 100 - 600 [mV] Note 1
VCM
Differential Input High
Threshold
Differential Input Low
Threshold
Differential Input Common
Mode Voltage
- - +100 [mV]
-100 - - [mV]
+1.0 +1.2 +1.5 [V]
Note 1: LVDS Signal Waveform
www.jxlcd.com
www.jxlcd.com
Condition
VCM = 1.2V
Note 1
V
= 1.2V
CM
Note 1
VTH-VTL = 200MV (max)
Note 1
document version 1.4 13
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 14
Freq
F
max
F
center
F
min
F
center
* F
DEV
< Spread Spectrum>
time
2. AC Characteristics
Description Symbol Min Max Unit Note
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
Maximum deviation of input
clock frequency during SSC
Maximum modulation frequency
of input clock during SSC
www.jxlcd.com
www.jxlcd.com
FDEV -
FMOD - 200 KHz
±±±± 3
%
1
FMOD
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 14
Page 15
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
5.2 Backlight Unit
Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature):
Symbol Parameter Min.
IR
LED Operation Current - 110
LED
VLB
P
BLU Power consumption (for reference)
BLU
Light Bar Operation Voltage
(for reference)
Typ. Max.
120
42 44.8 47.6
- 19.71
22.85 [Watt]
Unit Note
[mA]
Note 1
[Volt]
Note 2
Operating with fixed
driving current
LT
LED life Time (Typical)
LED
Note 1 :The specified current is input LED chip 100% duty current.
Note 2 : The value showed in the table is one light bar’s operation voltage.
Note 3 : Definition of life time : brightness becomes 50% of its original value. The minimum life time of LED unit is on the
condition of IR
Note 4: Each LED light bar consists of 56 pcs LED package ( 4 strings x 14 pcs / string ).
www.jxlcd.com
= 110mA and 25±2℃(Room temperature).
LED
www.jxlcd.com
30,000
-- -
[Hour]
Note 3
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 15
Page 16
Product Specification
AU OPTRONICS CORPORATION
6.0 Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
M240HW01 V8
www.jxlcd.com
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 16
Page 17
Product Specification
AU OPTRONICS CORPORATION
6.2 The input data format
M240HW01 V8
www.jxlcd.com
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 17
Page 18
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
6.3 Signal Description
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first/third LVDS
port(RxOxxx) transmits odd pixels while the second/fourth LVDS port(RxExxx) transmits
even pixels.
Pin number Signal name Description
1 RxO1CN0 F path_ Negative LVDS differential data input (Odd data)
2 RxO1CP0 F path_ Positive LVDS differential data input (Odd data)
3 RxO1CN1 F path_ Negative LVDS differential data input (Odd data)
4 RxO1CP1 F path_ Positive LVDS differential data input (Odd data)
5 RxO1CN2 F path_ Negative LVDS differential data input (Odd data)
6 RxO1CP2 F path_ Positive LVDS differential data input (Odd data)
7 GND Power Ground
8 RxO1CCLKN F path_ Negative LVDS differential clock input (Odd clock)
9 RxO1CCLKP F path_ Positive LVDS differential clock input (Odd clock)
10 GND Power Ground
11 RxO1CN3 F path_ Negative LVDS differential data input (Odd data)
12 RxO1CP3 F path_ Positive LVDS differential data input (Odd data)
13 GND Power Ground
14 RxE2CN0 F path_ Negative LVDS differential data input (Even data)
15 RxE2CP0 F path_ Positive LVDS differential data input (Even data)
16 RxE2CN1 F path_ Negative LVDS differential data input (Even data)
17 RxE2CP1 F path_ Positive LVDS differential data input (Even data)
18 RxE2CN2 F path_ Negative LVDS differential data input (Even data)
19 RxE2CP2 F path_ Positive LVDS differential data input (Even data)
20 GND Power Ground
21 RxE2CCLKN F path_ Negative LVDS differential clock input (Even clock)
22 RxE2CCLKP F path_ Positive LVDS differential clock input (Even clock)
23 GND Power Ground
24 RxE2CN3 F path_ Negative LVDS differential data input (Even data)
www.jxlcd.com
www.jxlcd.com
25 RxE2CP3 F path_ Positive LVDS differential data input (Even data)
26 GND Power Ground
27 RxO3CN0 B path_ Negative LVDS differential data input (Odd data)
28 RxO3CP0 B path_ Positive LVDS differential data input (Odd data)
29 RxO3CN1 B path_ Negative LVDS differential data input (Odd data)
30 RxO3CP1 B path_ Positive LVDS differential data input (Odd data)
AUO Confidential For STAR Internal Use Only / 2011/12/13
31 RxO3CN2 B path_ Negative LVDS differential data input (Odd data)
32 RxO3CP2 B path_ Positive LVDS differential data input (Odd data)
document version 1.4 18
Page 19
Product Specification
AU OPTRONICS CORPORATION
33 GND Power Ground
34 RxO3CCLKN B path_ Negative LVDS differential clock input (Odd clock)
35 RxO3CCLKP B path_ Positive LVDS differential clock input (Odd clock)
36 GND Power Ground
37 RxO3CN3 B path_ Negative LVDS differential data input (Odd data)
38 RxO3CP3 B path_ Positive LVDS differential data input (Odd data)
39 GND Power Ground
40 RxE4CN0 B path_ Negative LVDS differential data input (Even data)
41 RxE4CP0 B path_ Positive LVDS differential data input (Even data)
42 RxE4CN1 B path_ Negative LVDS differential data input (Even data)
43 RxE4CP1 B path_ Positive LVDS differential data input (Even data)
44 RxE4CN2 B path_ Negative LVDS differential data input (Even data)
45 RxE4CP2 B path_ Positive LVDS differential data input (Even data)
46 GND Power Ground
M240HW01 V8
47 RxE4CCLKN B path_ Negative LVDS differential clock input (Even clock)
48 RxE4CCLKP B path_ Positive LVDS differential clock input (Even clock)
49 GND Power Ground
50 RxE4CN3 B path_ Negative LVDS differential data input (Even data)
51 RxE4CP3 B path_ Positive LVDS differential data input (Even data)
www.jxlcd.com
VDD
Pin number Signal name Description
1 NC Do not connect (for AUO test only.)
2 NC Do not connect (for AUO test only.)
3 NC Do not connect (for AUO test only.)
4 GND Power Ground
5 GND Power Ground
6 GND Power Ground
7 GND Power Ground
8 NC Do not connect (for AUO test only.)
9 NC Do not connect (for AUO test only.)
10 GND Power Ground
11 VDD Power +5V
12 VDD Power +5V
13 VDD Power +5V
14 VDD Power +5V
15 VDD Power +5V
www.jxlcd.com
Note1: Start from left side
document version 1.4 19
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 20
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
www.jxlcd.com
Note2: Input signals of odd and even clock shall be the same timing.
document version 1.4 20
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 21
Product Specification
AU OPTRONICS CORPORATION
6.4 Timing Characteristics
Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.
Item Symbol Min Typ Max Unit
Data CLK
Tclk
Period Th 510 560 600 [Tclk]
32
75.9
98
<Note 2>
M240HW01 V8
[MHz]
H-section
V-section
Frame Rate
Note1 : DE mode only
Note2 : OD function turn off
Display Area Tdisp(h) 480 480 480 [Tclk]
Blanking
Period Tv 1088 1130 1715 [Th]
Display Area Tdisp(v) 1080 1080 1080 [Th]
Blanking
www.jxlcd.com
www.jxlcd.com
Tblk(h)
Tblk(v)
F 50 - 120 [Hz]
30
<Note 2>
8 50 635 [Th]
80 120 [Tclk]
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 21
Page 22
6.5 Timing diagram
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
www.jxlcd.com
www.jxlcd.com
document version 1.4 22
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 23
Product Specification
AU OPTRONICS CORPORATION
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
M240HW01 V8
Note 1: Insert a black pattern
Note 2: Insert a white pattern after valid data and last until VDD falls to 10%
Parameter
www.jxlcd.com
www.jxlcd.com
Value
Min. Max.
T1 0.5 10 [msec]
T2 0 50 [msec]
T3 500 - [msec]
T4 200 - [msec]
T5 40 - [msec]
T6 1000 - [msec]
Unit
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 23
Page 24
Product Specification
AU OPTRONICS CORPORATION
7.0 Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
LVDS
Connector Name / Designation Interface Connector / Interface card
Manufacturer JAE or compatible
Type Part Number FI-RE51S-HF
Mating Housing Part Number JAE FI-RE51HL
M240HW01 V8
VDD
Connector Name / Designation Interface Connector / Interface card
Manufacturer P-TWO or compatible
www.jxlcd.com
Type Part Number 185132-15021
Mating Housing Part Number Yeon-Ho 12507HS-15L
7.1.1 Pin Assignment
LVDS
Pin number
1 RxO1CN0 26 GND
2 RxO1CP0 27 RxO3CN0
3 RxO1CN1 28 RxO3CP0
4 RxO1CP1 29 RxO3CN1
5 RxO1CN2 30 RxO3CP1
6 RxO1CP2 31 RxO3CN2
7 GND 32 RxO3CP2
8 RxO1CCLKN 33 GND
9 RxO1CCLKP 34 RxO3CCLKN
10 GND 35 RxO3CCLKP
11 RxO1CN3 36 GND
12 RxO1CP3 37 RxO3CN3
13 GND 38 RxO3CP3
www.jxlcd.com
Signal name Pin number Signal name
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 24
Page 25
Product Specification
AU OPTRONICS CORPORATION
14 RxE2CN0 39 GND
15 RxE2CP0 40 RxE4CN0
16 RxE2CN1 41 RxE4CP0
17 RxE2CP1 42 RxE4CN1
18 RxE2CN2 43 RxE4CP1
19 RxE2CP2 44 RxE4CN2
20 GND 45 RxE4CP2
21 RxE2CCLKN 46 GND
22 RxE2CCLKP 47 RxE4CCLKN
23 GND 48 RxE4CCLKP
24 RxE2CN3 49 GND
25 RxE2CP3 50 RxE4CN3
VDD
Pin number
1 NC 9 NC
2 NC 10 GND
3 NC 11 VDD
4 GND 12 VDD
5 GND 13 VDD
6 GND 14 VDD
7 GND 15 VDD
8 NC
www.jxlcd.com
www.jxlcd.com
51 RxE4CP3
Signal name Pin Signal name
M240HW01 V8
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 25
Page 26
Product Specification
AU OPTRONICS CORPORATION
7.2 Connector on Backlight Unit.
M240HW01 V8
This connector is mounted on LED light-bar.
Connector Name / Designation Light Bar Connector
Manufacturer ENTERY INDUSTRIAL CO., LTD.
Type Part Number 3707K-Q06N-01R
7.2.1 Pin assignment
Pin no. Signal name
1 IRLED (current out)
2 IRLED (current out)
3 VLED (voltage in)
4 VLED (voltage in)
5 IRLED (current out)
6 IRLED (current out)
www.jxlcd.com
www.jxlcd.com
document version 1.4 26
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 27
Product Specification
AU OPTRONICS CORPORATION
8.0 Reliability Test
Environment test conditions are listed as following table.
Items Required Condition
Temperature Humidity Bias (THB)
Ta= 50℃, 80%RH, 300hours
M240HW01 V8
Note
High Temperature Operation (HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
Low Temperature Storage (LTS)
Vibration Test
(Non-operation)
Shock Test
(Non-operation)
Drop Test Height: 46 cm, package test
Thermal Shock Test (TST)
www.jxlcd.com
On/Off Test On/10sec, Off/10sec, 30,000 cycles
ESD (Electro Static Discharge)
www.jxlcd.com
Ta= 50℃, 50%RH, 300hours
Ta= 0℃, 300hours
Ta= 60℃, 300hours
Ta= -20℃, 300hours
Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
-20℃/30min, 60℃/30min, 100 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.
1
2
Altitude Test
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed
Operation:10,000 ft
Non-Operation:30,000 ft
No data lost
Self-recoverable
No hardware failures.
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 27
Page 28
Product Specification
AU OPTRONICS CORPORATION
9.0 Shipping Label
The label is on the panel as shown below:
Manufactured: XX/XX
Model No: M240HW01 V.8
AU Optronics
Made in XXXXX
M240HW01 V8
Note 1: For Pb Free products, AUO will add for identification.
Note 2: For RoHS compatible products, AUO will add
Note 3: For China RoHS compatible products, AUO will add
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
www.jxlcd.com
www.jxlcd.com
for identification.
for identification.
AUO Confidential For STAR Internal Use Only / 2011/12/13
document version 1.4 28
Page 29
www.jxlcd.com
www.jxlcd.com
Ver 1.2
AUO Confidential For STAR Internal Use Only / 2011/12/13
10.0 Mechanical Characteristics
Page 30
Ver 1.2
www.jxlcd.com
www.jxlcd.com
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 31
www.jxlcd.com
www.jxlcd.com
Avoid touching COF position
when doing mechanical design
Ver 1.2
AUO Confidential For STAR Internal Use Only / 2011/12/13
Page 32
”
H ” Tape
11. Packing Specification
Module
Top cover
Paste protect film
Paste lamp wire
1pcs Module/ESD
8 pcs/carton
Cushion
Carton
Corner angle
Stretch film
www.jxlcd.com
www.jxlcd.com
Label
Moisture-proof film
PET band
Put top cover
Corner angle
Pallet
Pallet and shipment information
1 Panel 1 556(H)mm x 323.2(V)mm x 14.4(D)mm 2.20
2 Cushion 1 - 1.51
3 Box 1 406(L)mm x 281(W)mm x 651(H)mm 1.185 without Panel & cushion
4 Packing Box 8 pcs/Box 406(L)mm x 281(W)mm x 651(H)mm
5 Pallet 1 1140(L)mm x 830(W)mm x 138(H)mm 12
6 Pallet after Packing 16 boxes/pallet 1140(L)mm x 830(W)mm x 142.2(H)mm
Item
Q'ty Dimension Weight(kg)
AUO Confidential For STAR Internal Use Only / 2011/12/13
Specification
20.29
336.64
Remark
±0.08kg
with panel & cushion
Ver 0.1
Loading...