AU Optronics M185XW01 V Product Specification

Product Specification

document version 1.

0

1

() Preliminary Specification

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

(V) Final Specification

Module 18.5” Color TFT-LCD

AU OPTRONICS CORPORATION

M185XW01 VD

Model Name M185XW01 VD

Customer Date

Approved by

Approved by Date

ChiYin Wu

Prepared by

2010/7/23

Note: This Specification is subject to

change without notice.

Derec Yang

Desktop Display Business Group /

AU Optronics corporation

2010/7/22

Product Specification

document version 1.

0

2

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

Contents

1.0 Handling Precautions.............................................................4

2.0 General Description ...............................................................5

2.1 Display Characteristics ...................................................................................................................5

2.2 Optical Characteristics....................................................................................................................6

3.0 Functional Block Diagram ....................................................10

4.0 Absolute Maximum Ratings ...........

4.1 TFT LCD Module ............................................................................................................................. 11

4.2 Backlight Unit................................................................................................................................... 11

4.3 Absolute Ratings of Environment ..................................................................................................... 11

..............................................11

5.0 Electrical characteristics......................................................12

5.1 TFT LCD Module ...........................................................................................................................12

5.1.1 Power Specification.................................................................................................. 12

5.1.2 Signal Electrical Characteristics ................................................................................. 13

5.2 Backlight Unit...................................................................................................................................15

6.0 Signal Characteristic............................................................16

6.1 Pixel Format Image .......................................................................................................................16

6.2 The input data format....................................................................................................................17

6.3 Signal Description.......................................................................................................................... 18

6.4 Timing Characteristics ......................................................................................................................20

6.5 Timing diagram...............................................................................................................................21

6.6 Power ON/OFF Sequence ...........................................................................................................22

7.0 Connector & Pin Assignment................................................23

7.1 TFT LCD

7.1.1 Pin Assignment ....................................................................................................... 23

7.2 Recommend connector for Backlight Unit .......................................................................................24

7.2.1 Pin assignment........................................................................................................ 24

Module ...........................................................................................................................23

8.0 Reliability Test .....................................................................25

9.0 Shipping Label .....................................................................26

10.0 Mechanical Characteristics.................................................26

11. Packing Specification...........................................................29

Product Specification

document version 1.

0

3

24

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

Record of Revision

Version and

Date

0.1

2010/4/7

0.2

2010/5/5

1.0

2010/7/23

Pag

e

All

21

Old description New Description Remark

First Edition for Customer N/A

Modify Power ON/OFF Sequence
Modify Mechanical

Modify Power ON/OFF Sequence
Modify Mechanical

Final Version 1.0

0.2

2010/5/5

2010/7/23

Product Specification

document version

1.0

4

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

1.0 Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.

6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.

7) Do not open or modify the Module Assembly.

8) Do not press the reflector sheet at the back of the module to any directions.

9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the
far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.

10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.

11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.

12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.

Product Specification

document version

1.0

5

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

2.0 General Description

This specification applies to the 18.5 inch-wide Color a-Si TFT-LCD Module M185XW01.The
display supports the WXGA - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). All input signals are 1-channel LVDS interface and this module doesn’t contain an
inverter board for backlight.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25℃ condition:

ITEMS Unit SPECIF

Screen Diagonal [mm]
Active Area [mm] 409.8 (H) x 230.4 (V)
Pixels H x V 1366(x3) x 768
Pixel Pitch [um] 300 (per one triad) × 300
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
Contrast Ratio 1000 (Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)

Nominal Input Voltage VDD [Volt] +5.0 V (Typ)
Power Consumption
(VDD line + LED line)

Weight [Grams]
Physical Size [mm] 430.4 (W) x 254.6 (H) Typ. x 9.9 (D) Typ

`` One channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance RoHS Compliance

[Watt]

[oC]
[oC]

470.1(18.51”)

250 cd/m

10.5

(without inverter, all black pattern)
129

0 to +50

-20 to +60

ICATIONS

(Typ.)

0(Typ)

2

(Typ.)

Product Specification

document version

1.0

6

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25℃:

Item Unit Conditions Min. Typ. Max. Note

Horizontal (Right)

Viewing Angle [degree]

Contrast ratio Normal Direction

Response Time [msec]

Color / Chromaticity
Coordinates (CIE)

Color Coordinates (CIE) White

Central Luminance [cd/m2] 200 250 - 6

Luminance Uniformity

Crosstalk (in 60Hz)

Flicker

[%]

[%]

dB

CR = 10 (Left)

Vertical (Up)
CR = 10 (Down)

Raising Time (TrR)

Falling Time (TrF)

Raising + Falling

Red x

Red y

Green x

Green y

Blue x

Blue y

White x

White y

150

140

600

-

-

-

0.604 0.634 0.664

0.321 0.351 0.381

0.304 0.334 0.364

0.575 0.605 0.635

0.116 0.146 0.176

0.029 0.059 0.089

0.283 0.313 0.343

0.299 0.329 0.359

65 70

170

160

1000 -

3.6 5.7

1.4 2.3

5 8

-

-

-

-

-

1.5 8

-20

2

3

4

5

7

9

Product Specification

document version

1.0

7

TFT-LCD Module

LCD Panel

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

Note 1: Measurement method

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35 )℃ . In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.

Photo detector

M185XW01 VD

Measured distance

Note 2: Defi

Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°

horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is

broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low

(down). The measurement direction is typically perpendicular to the display surface with the

screen rotated about its center to develop the desired measurement viewing angle.

nition of viewing angle measured by ELDIM (EZContrast 88)

Center of the screen

Product Specification

document version

1.0

8

90 10 0 %

Tr

F

R

10 0 %

Tr

F

R

1 Frame

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

Note 3: Contrast ratio is measured by TOPCON SR-3

Note 4: Definition of Response time measured by Westar TRD-100A

The output signals of photo detector are measured when the input signals are changed from “Full

Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TfF),

respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of

amplitudes.

Optical

Optical

response

response

100

100

W hite

Black

1 Frame

Black

Tr

Tr

W hite

TrR + TfF = 5 msec (typ.).

Note 5: Colo

r chromaticity and coordinates (CIE) is measured by TOPCON SR-3

Note 6: Central luminance is measured by TOPCON SR-3

Note 7: Luminance uniformity of these 9 points is defined as below and measured by

TOPCON SR-3

Uniformity =

Note 8: Crosstalk is defined as below and measured by TOPCON SR-3

CT = | YB – YA | / YA × 100 (%)

9)-(1 points 9in LuminanceMinimum

9)-(1 Points 9in LuminanceMaximum

Product Specification

document version

1.0

9

R G B R G B

Level

DC

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

Where

YA = Luminance of measured location without gray level 0 pattern (cd/m2)

YB = Luminance of measured location with gray level 0 pattern (cd/m2)

M185XW01 VD

Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3

R G B R G B

Gray Level = L127

R G B R G B

Method: Record dBV & DC value with TRD-100

Amplitude

DC

Gray Level = L0

log20(dB)Flicker =

AC

Time

Hz) 30Level(at AC

Product Specification

document version

1.0

10

DC

Connector

Timing

LVD

S

Y

-

Driver IC

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

3.0 Functional Block Diagram

The following diagram shows the functional block of the 18.5 inch Color TFT-LCD Module:

+5V

I/F + X-PCB

LVDS

Receiver

DC/DC

Converter

AUO

ASIC

Gamma

Correction

Controller

mini

Transmitter

G1

G768

TFT-LCD

1366(x3) x 768

Pixels

D1

D4098

LED

Driver

I/F PCB Interface:

FI-XPB30SRL

-HF11(JAE) / 093F30-00T01A-M4(STARCONN)

Mating Type:

FI-X30HL (JAE)(Locked Type)

Product Specification

document version

1.0

11

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

4.0 Absolute Maximum Ratings

Absolute maximum ratings of the module are as following:

4.1 TFT LCD Module

Item Symbol Min

Logic/LCD Drive

Voltage

Backlight Unit

Item Symbol

LED Current ILED

4.3 Absolute Ratings of Environment

Max Unit Conditions

VDD 0 +5.5 [Volt] Note 1,2

Min Max Unit Conditions

- 63

M185XW01 VD

4.2

[mA] Note 1,2

Item Symbol Min. Max. Unit Conditions

Operating Temperature TOP 0 +50 [oC]

Operation Humidity HOP 5 90 [%RH]

Storage Temperature TST -20 +60 [oC]

Storage Humidity HST

5 90

[%RH]

Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values

Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).

Note 3

Operating Range Storage Range

Product Specification

document version

1.0

12

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

M185XW01 VD

AU OPTRONICS CORPORATION

5.0 Electrical characteristics

5.1 TFT LCD Module

5.1.1 Power Specification

Input power specifications are as following:

Symbol Parameter Min Typ Max Unit Conditions

VDD

Logic/LCD Drive

Voltage

IDD Input Current

PDD

VDD Power

4.5

-

-

5.0

0.45

2.25 2.5

5.5

0.5

[Volt] +/-10%

[A]

[Watt]

VDD= 5.0V, All Black Pattern
At 60Hz,

VDD= 5.0V, All Black Pattern
At 60Hz

IRush Inrush Current

VDDrp

Allowable Logic/LCD

Drive Ripple Voltage

-

-

- 2 [A] Note 1

- 350 [mV] p-p

Note 1: Measurement conditions:

The duration of rising time of power input is 470us.

(High to Low)
Control
Signal

SW1

SW MAG-SPST

1 2

+12.0V

+5.0V

R1
47K

R2

1K

VR1

47K

D6
D5
D2 S
D1

G

C3

0.01uF/25V

Q3
AO6402

D2SD1D5

G

D6

Q3

AO6402

VDD= 5.0V, All Black Pattern
At 60Hz

F1

VCC

C1
1uF/16V

(LCD Module Input)

C2
1uF/25V

Product Specification

document version

1.0

13

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of

SN75LVDS82DGG (Texas Instruments) in detail.

1. DC Characteristics of each signal are as following:

Symbol Parameter Min Typ Max Units

VTH

VTL

│

VID│ Input Differential Voltage 100 - 600 [mV] Note 1

VICM

Differential Input High

Threshold

Differential Input Low

Threshold

Differential Input Common

Mode Voltage

- - +100 [mV]

-100 - - [mV]

+1.0 +1.2 +1.5 [V]

Note 1: LVDS Signal Waveform

Condition

VICM = 1.2V

Note 1

VICM = 1.2V

Note 1

VTH-VTL = 200MV (max)

Note 1

document version

1.0

14

Freq

F

max

F

center

F

min

Fcenter

* F

DEV

< Spread Spectrum>

time

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

2. AC Characteristics

Description Symbol Min Max Unit Note

Maximum deviation of input

clock frequency during SSC

Product Specification

AU OPTRONICS CORPORATION

±±±±

FDEV -

3

%

M185XW01 VD

Maximum modulation frequency

of input clock during SSC

FMOD - 200 KHz

1

FMOD

Product Specification

document version

1.0

15

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

5.2 Backlight Unit

Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature):

Symbol Parameter Min.

Typ. Max.

Unit Note

IR

LED Operation Current

LED

VLB

P

BLU Power consumption (for reference)

BLU

LT

LED life Time

LED

Note 1 :The specified current is input LED chip 100% duty current.

Note 2 : The value showed in the table is one light bar’s operation voltage.

Note 3 : Definition of life time : brightness becomes 50% of its original value. The minimum life time of LED unit is on

the condition of IR

Note 4: Each LED light bar consists of 40 pcs LED package ( 4 strings x 10 pcs / string ).

Light Bar Operation Voltage

(for reference)

= 60mA and 25±2℃(Room temperature).

LED

57 60 63

30 34 36

6.8 8.2 9.1

30000

- -

[mA]

Note 1

[Volt]

Note 2

[Watt]

[Hour]

Note 3

Operating with fixed

driving current

Product Specification

document version

1.0

16

R G B R G B

R G B R G B

R G B R G B

R G B R G B

1 2 1

365 1

366

1st Line

768

Line

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

6.0 Signal Characteristic

6.1 Pixel Format Image

Following figure shows the relationship of the input signals and LCD pixel format.

Product Specification

document version

1.0

17

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

6.2 The input data format

Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: 8-bits signal input.

LVDS Data Mapping of NS Format

M185XW01 VD

Product Specification

document version

1.0

18

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

6.3 Signal Description

The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.

PIN # SIGNAL NAME DESCRIPTION

1 NC No contact (For AUO internal use)

2 NC No contact (For AUO internal use)

3 NC No contact (For AUO internal use)

4 GND Power Ground

5 RXIN0- Negative LVDS differential data input (0)

6 RXIN0+ Positive LVDS differential data input (0)

7 GND Power Ground

8 RXIN1- Negative LVDS differential data input (1)

9 RXIN1+ Positive LVDS differential data input (1)

10 GND Power Ground

11 RXIN2- Negative LVDS differential data input (2)

12 RXIN2+ Positive LVDS differential data input (2)

13 GND Power Ground

14 RXCLKIN- Negative LVDS differential clock input (clock)

15 RXCLKIN+ Positive LVDS differential data input (clock)

16 GND Power Ground

17 RXIN3- Negative LVDS differential data input (3)

18 RXIN3+ Positive LVDS differential data input (3)

19 GND Power Ground

20 NC No contact (For AUO internal use)

21 NC No contact (For AUO internal use)

22 NC No contact (For AUO internal use)

23 GND Power Ground

24 GND Power Ground

25 GND Power Ground

26 VCC +5V power supply

27 VCC +5V power supply

28 VCC +5V power supply

29 VCC +5V power supply

30 VCC +5V power supply

Note1: Start from left side

Product Specification

document version

1.0

19

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

1

NC

Note2: Input signals of clock shall be the same timing.

Note3: Please follow TV VESA Pin Assignment.

30

VCC

Product Specification

document version

1.0

20

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

6.4 Timing Characteristics

Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.

Signal

Signal

SignalSignal

Item

Period Tv 776 808 1023 Th

Symbol

Min Typ Max Unit

M185XW01 VD

Active Tdisp(v)

V-section

H-section

Clock

Clock

ClockClock

Frame Rate

Frame Rate

Frame RateFrame Rate

Note1 : DE mode only
Note2 : Clock Frequency 90MHz(Max.)= 1416(H)*847(V)*75Hz

Blanking Tblk(v)

Period Th 1416 1606 2047

Active Tdisp(h) 1366 1366 1366

Blanking Tblk(h)

Period Tclk - 12.8 - ns

Frequency

Frame Rate

Freq

F

768 768 768

8 40 255

50 240 681

- 78 90 MHz

50 60 75 Hz

Th

Th

Tclk

Tclk

Tclk

document version

1.0

21

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

6.5 Timing diagram

Product Specification

AU OPTRONICS CORPORATION

M185XW01 VD

Product Specification

document version

1.0

22

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

6.6 Power ON/OFF Sequence

VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.

Parameter

Min. Max.

T1 0.5 10 [msec]

T2 0 50 [msec]

T3 500 - [msec]

T4 200 - [msec]

T5 0 50 [msec]

T6 1000 - [msec]

Value

Unit

Product Specification

document version

1.0

23

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

7.0 Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.

7.1 TFT LCD Module

Connector Name / Designation Interface Connector / Interface card

Manufacturer JAE or STARCONN

Type Part Number

Mating Housing Part Number

FI-XPB30SRL-HF11(JAE) / 093F30-00T01A-M4(STARCONN)

FI-X30HL(JAE) (Locked Type)

FI-X30H (JAE)(Unlocked Type)

7.1.1 Pin Assignment

Pin# Signal Name Pin# Signal Name

1 NC 2 NC

3 NC 4 GND

5

7

9

11

13

15

17

19

RXIN0-

GND

RXIN1+

RXIN2-

GND

RXCLKIN+

RXIN3-

GND

6

8

10

12

14

16

18

20 NC

RXIN0+

RXIN1-

GND

RXIN2+

RXCLKIN-

GND

RXIN3+

21 NC 22 NC

23

25

27 VCC 28 VCC

29 VCC 30 VCC

GND

GND

24

26 VCC

GND

Product Specification

document version

1.0

24

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

7.2 Recommend connector for Backlight Unit

This connector is mounted on the monitor system board for LED light-bar Wire mating.

Connector Name / Designation Driver Board Connector

Manufacturer CviLux Corpration

M185XW01 VD

Mating Type Part Number

7.2.1 Pin assignment
Pin no. Signal name

1 IRLED (current out)

2 IRLED (current out)

3 VLED (voltage in)

4 VLED (voltage in)

5 IRLED (current out)

6 IRLED (current out)

CI1406M1HRB-NH

Product Specification

document version

1.0

25

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

8.0 Reliability Test

Environment test conditions are listed as following table.

Items Required Condition

Temperature Humidity Bias (THB) Ta= 50 , ℃80%RH, 300hours

M185XW01 VD

Note

High Temperature Operation (HTO) Ta= 50 , ℃50%RH, 300hours

Low Temperature Operation (LTO) Ta= 0 , 300hours℃

High Temperature Storage (HTS) Ta= 60 , 300hours℃

Low Temperature Storage (LTS) Ta= -20 , 300hours℃

Acceleration: 1.5 Grms
Vibration Test
(Non-operation)

Shock Test
(Non-operation)

Drop Test Height: 60 cm, package test

Thermal Shock Test (TST) -20℃/30min, 60℃/30min, 100 cycles

On/Off Test On/10sec, Off/10sec, 30,000 cycles

ESD (Electro Static Discharge)

Wave: Random

Frequency: 10 - 200 Hz

Sweep: 30 Minutes each Axis (X, Y, Z)

Acceleration: 50 G

Wave: Half-sine

Active Time: 20 ms

Direction: ±X,

Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,

8 points, 25 times/ point.

Air Discharge: ± 15KV, 150pF(330Ω ) 1sec

8 points, 25 times/ point.

±Y, ±

Z (one time for each Axis)

1

2

Altitude Test

Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from

-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.

Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed

Operation:10,000 ft
Non-Operation:30,000 ft

No data lost
Self-recoverable
No hardware failures.

Product Specification

document version

1.0

26

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

9.0 Shipping Label

The label is on the panel as shown below:

Manufactured: XX/XX
Model No: M185XW01 V.D
AU Optronics
Made in XXXXX

M185XW01 VD

Note 1: For P

Note 2: For RoHS compatible products, AUO will add for identification.

Note 3: For China RoHS compatible products, AUO will add for identification.

Note 4: The Green Mark will be presented only when the green documents have been ready by

AUO Internal Green Team.

b Free products, AUO will add for identification.

10.0 Mechanical Characteristics

Product Specification

document version

1.0

27

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

Product Specification

document version

1.0

28

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

AU OPTRONICS CORPORATION

M185XW01 VD

document version

1.0

29

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

11. Packing Specification

Product Specification

AU OPTRONICS CORPORATION

M185XW01 VD

單層

單層

單層單層

pallet

打棧示意圖

打棧示意圖

打棧示意圖打棧示意圖

document version

1.0

30

www.yslcd.com.tw

Studio Technology Co. Ltd. ( www.yslcd.com.tw )

2. Pallet and shipment information

1

2

Item

Item

ItemItem

Panel

Cushion

Q'ty

Q'ty

Q'tyQ'ty

1

1

Product Specification

AU OPTRONICS CORPORATION

Specification

Specification

SpecificationSpecification

430.4(H)mm x 254.6(V)mm x 12(D)mm

Dimension

Dimension

DimensionDimension

-

M185XW01 VD

Remark

Remark

RemarkRemark

Weight(kg)

Weight(kg)

Weight(kg)Weight(kg)

1.25

1.32

3

4

5

6

Box

Packing Box

Pallet

Pallet after Packing

10 pcs/Box

boxes/pallet

1

1

26

519(L)mm x 279(W)mm x 332(H)mm

519(L)mm x 279(W)mm x 332(H)mm

1140(L)mm x 1060(W)mm x 138(H)mm

1140(L)mm x 1060(W)mm x 138(H)mm

1.18

15

12

492

without Panel &

cushion

with panel & cushion