) Preliminary Specification
( V
( ) Final Specification
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
Module
Model Name
18.5” Color TFT-LCD
M185XTN01.2
Customer Date
Approved by
Approved by Date
Chiyin Wu
Prepared by
Note: This Specification is subject to
change without notice.
Glenn Chan
Desktop Display Business Group /
AU Optronics corporation
2012/5/9
document version 0.2 1
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
Contents
1.0 Handling Precautions............................................................. 4
2.0 General Description ............................................................... 5
2.1 Display Characteristics .............................................................................................................. 5
2.2 Optical Characteristics............................................................................................................... 6
2.3 Mechanical Characteristics ..................................................................................................... 10
3.0 Functional Block Diagram .................................................... 11
4.0 Absolute Maximum Ratings ......................................................... 12
4.1 TFT LCD Module ........................................................................................................................ 12
4.2 Backlight Unit.............................................................................................................................. 12
4.3 Absolute Ratings of Environment.................................................................................................. 12
5.0 Electrical characteristics ...................................................... 14
5.1 TFT LCD Module ...................................................................................................................... 14
5.1.1 Power Specification...................................................... 14
5.1.2 Signal Electrical Characteristics ................................... 15
5.2 Backlight Unit.............................................................................................................................. 17
6.0 Signal Characteristic............................................................ 18
6.1 Pixel Format Image .................................................................................................................. 18
6.2 The input data format ............................................................................................................... 18
6.3 Signal Description .................................................................................................................... 19
6.4 Timing Characteristics .................................................................................................................. 21
6.5 Timing diagram ......................................................................................................................... 22
6.6 Power ON/OFF Sequence....................................................................................................... 23
7.0 Connector & Pin Assignment................................................ 24
7.1 TFT LCD Module ...................................................................................................................... 24
7.1.1 Pin Assignment ............................................................ 24
7.2 LED Connector on Backlight Unit................................................................................................ 25
7.2.1 LED Pin assignment...................................................... 25
7.2.2 LED Connector dimension............................................. 26
7.2.3 LED Mating housing dimension..................................... 26
8.0 Reliability Test..................................................................... 27
9.0 Shipping Label ..................................................................... 28
10.0 Mechanical Characteristics................................................. 29
11. Packing Specification........................................................... 30
document version 0.2 2
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
0.1
2012/05/09
Preliminary Version
31
0.2
13 Logic/LCD Drive Voltage VDD: +5.5V Logic/LCD Drive Voltage VDD: +6.0V
2012/6/18
15
22 6.4 Timing characteristics
25
Old description New Description Remark
Update label positions.
5.1.1 Power specification Irush
Max. :2A
Clock: Max. 90 MHz
5.1.1 Power specification Irush Max. :
TBD
6.4 Timing characteristics
Clock: Max. 94 MHz
0.3
2012/7/4
0.3
6 “Energy Star 6.0 Compliance” : Yes Remove “Energy Star 6.0 Compliance”
because it’ll be tested not with panel
only but completed set.
27 Altitude test: Operation 15,000ft
6 Color / Chromaticity Coordinates (CIE)
Altitude test: Operation 18,000ft
Color / Chromaticity Coordinates (CIE)
2012/7/9
document version 0.2 3
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the
far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Please avoid touching COF contact while handling or fitting the TFT module into your system.
14) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between
5℃ and 35℃ at normal humidity.
document version 0.2 4
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
2.0 General Description
This specification applies to the 18.5 inch-wide Color a-Si TFT-LCD Module M185XW01.The
display supports the WXGA - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). All input signals are 1-channel LVDS interface and this module doesn’t contain an
inverter board for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25℃ condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm]
470.1(18.51”)
Active Area [mm] 409.8 (H) x 230.4 (V)
Pixels H x V 1366(x3) x 768
Pixel Pitch [um] 300 (per one triad) × 300
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
250 cd/m
Contrast Ratio 1000 (Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V (Typ)
Power Consumption
[Watt]
(VDD line + LED line)
Weight [Grams]
VDD line: PDD (typ)= 1.75W, All black pattern at 60Hz
LED line : PBLU (typ) = 7.2W
Total: 8.95W
1290
(Typ)
Physical Size [mm] 430.4 (W) x 254.6 (H) Typ. x 9.9 (D) Typ
Interface One channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
[oC]
[oC]
0 to +50
-20 to +60
TCO6.0 Compliance Yes
2
(Typ.)
document version 0.2 5
2.2 Optical Characteristics
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
The optical characteristics are measured under stable conditions at 25℃:
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right)
CR = 10 (Left)
Viewing Angle [degree]
Vertical (Up)
CR = 10 (Down)
Contrast ratio Normal Direction
Raising Time (TrR)
Response Time [msec]
Falling Time (TrF)
Raising + Falling
Red x
Red y
Color / Chromaticity
Coordinates (CIE)
Green x
Green y
Blue x
Blue y
Color Coordinates (CIE) White
White x
White y
75
75
70
70
600
-
-
-
85
85
80
80
1000 -
3.6 -
1.4 -
5 -
0.616 0.646 0.676
0.303 0.333 0.363
0.287 0.317 0.347
0.595 0.625 0.655
0.124 0.154 0.184
0.031 0.061 0.091
0.283 0.313 0.343
0.299 0.329 0.359
Central Luminance [cd/m2] 200 250 -
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
[%]
[%]
dB
75 80
-
-
-
-
-
1.5
-20
2
3
4
5
6
7
8
9
document version 0.2 6
Product Specification
Center of the screen
AU OPTRONICS CORPORATION
M185XTN01.2
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35 )℃. In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.
Photo detector
Measured distance
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the screen
rotated about its center to develop the desired measurement viewing angle.
document version 0.2 7
Product Specification
response
T
response
1 Frame
1 Frame
T
AU OPTRONICS CORPORATION
M185XTN01.2
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF),
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
%
Optical
Optical
100
100
90
%
White
rF
Black
Black
rR
White
10
10
0
0
TrR + TrF = 5 msec (typ.).
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
Uniformity =
9)-(1 points 9in LuminanceMinimum
9)-(1 Points 9in LuminanceMaximum
document version 0.2 8
Product Specification
Level
DC
AU OPTRONICS CORPORATION
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
M185XTN01.2
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
R G B R G B
Gray Level = L127
R G B R G B
R G B R G B
Gray Level = L0
Method: Record dBV & DC value with TRD-100
Amplitude
DC
AC
Time
log20(dB)Flicker =
Hz) 30Level(at AC
document version 0.2 9
Product Specification
AU OPTRONICS CORPORATION
2.3 Mechanical Characteristics
M185XTN01.2
Item Unit
Compression Endurance
[Kgf]
Min.
2.5
Note
1
Note 1: Test Method
The point is at a distance from right-downside 25mm x 25mm defined as the Start Point of
Measure Points, and the point is at a distance 25mm from left-side & around 10mm from
PCB defined as the End Point.
Align 50mm x 50mm block from Start Point on the Bezel Back, and the corners of each
block are Measure Points.
If the distance from the last block to each side of the End Point ≧ 25mm, add other blocks
to make sure that most area of Bezel Back can be measured.
PCB
PCB
10mm
10mm
End Point
End Point
25mm
25mm
≧≧≧≧
25mm
≧≧≧≧
25mm
The last block
The last block
≧≧≧≧
25mm
≧≧≧≧
25mm
50mm
50mm
50mm
50mm
Start Point
Start Point
25mm
25mm
25mm
25mm
document version 0.2 10
DC
LVD
S
3.0 Functional Block Diagram
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
The following diagram shows the functional block of the 18.5 inch Color TFT-LCD Module:
+5V
LVDS
Receiver
Connector
DC/DC
Converter
AUO
ASIC
Timing
Controller
mini
Transmitter
Gamma
Correction
G1
Y-Driver IC
1366(x3) x 768
G768
D1 D4098
TFT-LCD
Pixels
LED
I/F + X-PCB
I/F PCB Interface:
MSCKT2407P30HB (STM) / AL230F-A0G1D-P (P-TWO)
Mating Type:
FI-X30HL(JAE) (Locked Type)
FI-X30H (JAE)(Unlocked Type)
Driver
document version 0.2 11
Product Specification
AU OPTRONICS CORPORATION
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive
Voltage
4.2 Backlight Unit
Item Symbol
VDD 0 +6.0 [Volt] Note 1,2
Min Max Unit Conditions
IRLED1
M185XTN01.2
LED Forward Current
LED
Pulse
Forward Current
LED forward Voltage variation
(per string variation)
IRLED2
IRLED3
IRLED4
IPLED1
IPLED2
IPLED3
IPLED4
Δ
Vf
0 90
- 150
- 3.4
[mA]
[mA]
[Volt]
Note 1,2,5
100% duty
Note 1,2,5
10% duty @100Hz
Note 1,2
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP 0 +50 [oC] Note 3
Glass surface temperature
(operation)
Operation Humidity HOP 5 90 [%RH]
TGS 0 +65 [oC] Note 3, Note 4
Note 3
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST
Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: Temperature and relative humidity range are shown as the below figure.
1. 90% RH Max ( Ta
2. Max wet-bulb temperature at 39
3. No condensation
Note 4: Function Judged only
Note 5: IRLED1,2,3,4 and IPLED1,2,3,4 define as per strings LED current.
document version 0.2 12
≦39℃)
℃ or less. ( Ta ≦39℃)
5 90
[%RH]
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
Operating Range Storage Range
document version 0.2 13
Product Specification
Voltage
At 60Hz,
M185XTN01.2
AU OPTRONICS CORPORATION
5.0 Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as following:
Symbol Parameter Min Typ Max Unit Conditions
VDD
Logic/LCD Drive
4.5
5.0
6
[Volt] +/-10%
IDD Input Current
-
-
PDD
VDD Power
IRush Inrush Current
VDDrp
Allowable Logic/LCD
Drive Ripple Voltage
-
-
-
-
Note 1: Measurement conditions:
The duration of rising time of power input is 470us.
+5.0V
R1
47K
(High to Low)
Control
Signal
SW1
SW MAG-SPST
1 2
+12.0V
R2
1K
VR1
47K
G
C3
0.01uF/25V
0.35
0.42
[A] VDD= 5.0V, All Black Pattern
0.42 0.5 VDD= 5.0V, All Black Pattern At 75Hz
1.75 2.1 [Watt] VDD= 5.0V, All Black Pattern At 60Hz
2.1 2.5 VDD= 5.0V, All Black Pattern At 75Hz
- TBD [A] Note 1
- 350 [mV] p-p VDD= 5.0V, All Black Pattern At 75Hz
Q3
AO6402
D6
D5
D2 S
D1
G
D2SD1D5
D6
Q3
AO6402
F1
VCC
C1
1uF/16V
(LCD Module Input)
C2
1uF/25V
document version 0.2 14
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
1. DC Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units
VTH
VTL
│
VID│ Input Differential Voltage 100 - 600 [mV] Note 1
VCM
Differential Input High
Threshold
Differential Input Low
Threshold
Differential Input Common
Mode Voltage
- - +100 [mV]
-100 - - [mV]
+1.0 +1.2 +1.5 [V]
Note 1: LVDS Signal Waveform
Condition
VCM = 1.2V
Note 1
VCM = 1.2V
Note 1
VTH-VTL = 200MV (max)
Note 1
document version 0.2 15
Freq
F
max
F
center
F
min
F
center
* F
DEV
< Spread
Spectrum>
time
2. AC Characteristics
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
Description Symbol
Maximum deviation of input
clock frequency during SSC
Maximum modulation frequency
of input clock during SSC
Min Max Unit Note
±±±±
F
DEV
-
F
MOD
- 200 KHz
3
%
F
1
MOD
document version 0.2 16
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
5.2 Backlight Unit
Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature):
Symbol Description Min.
IRLED1
IRLED2
LED Operation Current
IRLED3
IRLED4
VLED Light Bar Operation Voltage
PBLU BLU Power Consumption
LTLED LED Life Time (Typical) 30,000
67 70 73
24 25.6 27.2
6.4 7.2 7.9
Typ.
- - [Hour]
Max.
Unit Note
[mA]
[Volt]
[Watt]
Note 1
Note 2
Note 3
Note 4
Each module consists of 32 pcs LED ( 4 strings x 8 pcs / string )
Note 1 : The specified current is 100% duty of LED chip input current, IRLED1,2,3,4 define as per
strings LED current.
Note 2 : The value showed in the table is one light bar’s operation voltage.
Note 3 : PBLU = VLED *( IRLED1+IRLED2+IRLED3+IRLED4)
Note 4: Definition of life time: Brightness becomes to 50% of its original value. The minimum life
time of LED unit is on the condition of IRLED = 70mA and 25±2°C (Room Temperature).
document version 0.2 17
Product Specification
R G B R G B
R G B R G B
R G B R G B
R G B R G B
1 2 1
365 1
366
1st Line
768
Line
AU OPTRONICS CORPORATION
6.0 Signal Characteristic
6.1 Pixel Format Image
M185XTN01.2
Following figure shows the relationship of the input signals and LCD pixel format.
6.2 The input data format
LVDS Data Mapping of NS Format
Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: 8-bits signal input.
document version 0.2 18
Product Specification
AU OPTRONICS CORPORATION
6.3 Signal Description
PIN # SIGNAL NAME DESCRIPTION
1 NC No contact (For AUO internal use)
2 NC No contact (For AUO internal use)
3 NC No contact (For AUO internal use)
M185XTN01.2
4 GND
5 RXIN0-
6 RXIN0+
7 GND Power Ground
8 RXIN1- Negative LVDS differential data input (1)
9 RXIN1+ Positive LVDS differential data input (1)
10 GND Power Ground
11 RXIN2-
12 RXIN2+
13 GND Power Ground
14 RXCLKIN-
15 RXCLKIN+
16 GND Power Ground
17 RXIN3-
18 RXIN3+
19 GND
Power Ground
Negative LVDS differential data input (0)
Positive LVDS differential data input (0)
Negative LVDS differential data input (2)
Positive LVDS differential data input (2)
Negative LVDS differential clock input (clock)
Positive LVDS differential data input (clock)
Negative LVDS differential data input (3)
Positive LVDS differential data input (3)
Power Ground
20 NC No contact (For AUO internal use)
21 NC No contact (For AUO internal use)
22 NC No contact (For AUO internal use)
23 GND
24 GND
25 GND
26 VCC +5V power supply
27 VCC +5V power supply
28 VCC +5V power supply
29 VCC +5V power supply
30 VCC +5V power supply
Power Ground
Power Ground
Power Ground
document version 0.2 19
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
document version 0.2 20
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
6.4 Timing Characteristics
Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.
Signal
Item
Symbol
Min
Typ
Max
Unit
Period Tv 776 808 1023 Th
Active Tdisp(v) 768 768 768 Th
V-section
Blanking
Period Th 1416
Tblk(v) 8 40 255 Th
Active Tdisp(h) 1366 1366 1366 Tclk
H-section
Blanking
Tblk(h) 50 240 681 Tclk
Period Tclk - 12.8 - ns
Clock
Clock
ClockClock
Frame Rate
Frame Rate
Frame RateFrame Rate
Frequency
Frame
Rate
Freq 55 78 94 MHz
F
50 60 75 Hz
Note1 : DE mode only
Note2 : Clock Frequency 94MHz(Max.)= 1480(H)*847(V)*75Hz
1606 2047 Tclk
document version 0.2 21
6.5 Timing diagram
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
document version 0.2 22
Product Specification
T5
T2
T1
T6
AU OPTRONICS CORPORATION
M185XTN01.2
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
Power Supply VDD
LVDS Signal
Backlight On
Parameter
10%
90%
VALID
DATA
T3
T4
Power Sequence Timing
Value
Min. Typ. Max.
90%
10%
T7
Unit
T1 0.5 - 10 [ms]
T2 0 - 50 [ms]
T3 500 - - [ms]
T4 100 - - [ms]
T5 0 50
T6 5 - 100
T7 1000 - - [ms]
Note1 : Recommend setting T5 = 0ms to avoid electronic noise when VDD is off.
Note2 : During T5 and T6 period , please keep the level of input LVDS signals with Hi-Z state.
[ms]
Note1,2
[ms]
Note1,2
document version 0.2 23
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
7.0 Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
Connector Name / Designation Interface Connector / Interface card
Manufacturer
STM or P-TWO
MSCKT2407P30HB (STM) / AL230F-A0G1D-P
Type Part Number
Mating Housing Part Number
(P-TWO)
FI-X30HL(JAE) (Locked Type)
FI-X30H (JAE)(Unlocked Type)
7.1.1 Pin Assignment
Pin# Signal Name Pin# Signal Name
1 NC 2 NC
3 NC 4 GND
5
7
9
11
13
15
17
19
RXIN0-
GND
RXIN1+
RXIN2-
GND
RXCLKIN+
RXIN3-
GND
6
8
10
12
14
16
18
20 NC
RXIN0+
RXIN1-
GND
RXIN2+
RXCLKIN-
GND
RXIN3+
21 NC 22 NC
23
25
GND
24
26 VCC
GND
GND
27 VCC 28 VCC
29 VCC 30 VCC
document version 0.2 24
Product Specification
AU OPTRONICS CORPORATION
7.2 LED Connector on Backlight Unit.
M185XTN01.2
This connector is mounted on LED light-bar.
Connector Name / Designation Light Bar Connector
Manufacturer
Mating Type Part Number
ENTERY (E&T)
3707K-Q06N-01R
7.2.1 LED Pin assignment
Pin# Signal Name
1 IRLED1 (current out)
2 IRLED2 (current out)
3 VLED (voltage in)
4 VLED (voltage in)
5 IRLED3 (current out)
Corporation
(Wire harness)
6 IRLED4 (current out)
document version 0.2 25
==××=××
==××=××
7.2.2 LED Connector dimension
Product Specification
AU OPTRONICS CORPORATION
)(0.1,25.400.39.13 mmunitPitchDVH
)(0.1,25.400.39.13 mmunitPitchDVH
M185XTN01.2
7.2.3 LED Mating housing dimension
document version 0.2 26
8.0 Reliability Test
Product Specification
AU OPTRONICS CORPORATION
M185XTN01.2
Environment test conditions are listed as following table.
Items Required Condition
Temperature Humidity Bias (THB)
High Temperature Operation (HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
Low Temperature Storage (LTS)
Vibration Test
(Non-operation)
Shock Test
(Non-operation)
Drop Test Height: 46 cm, package test
Ta= 50℃, 80%RH, 300hours
Ta= 50℃, 50%RH, 300hours
Ta= 0℃, 300hours
Ta= 60℃, 300hours
Ta= -20℃, 300hours
Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X,
±Y, ±
Z (one time for each Axis)
Note
Thermal Shock Test (TST)
On/Off Test On/10sec, Off/10sec, 30,000 cycles
-20℃/30min, 60℃/30min, 100 cycles
1
Contact Discharge: ± 15KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.
ESD (Electro Static Discharge)
2
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.
Altitude Test
Operation:18,000 ft
Non-Operation:40,000 ft
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: EN61000-4-2, ESD class B:
Certain performance degradation allowed
No data lost
Self-recoverable
No hardware failures.
document version 0.2 27
Product Specification
AU OPTRONICS CORPORATION
9.0 Shipping Label
The label is on the panel as shown below:
Manufactured: XX/XX
Model No: M185XTN01.2
AU Optronics
Made in XXXXX
M185XTN01.2
Note 1: For Pb Free products, AUO will add for identification.
Note 2: For RoHS compatible products, AUO will add for identification.
Note 3: For China RoHS compatible products, AUO will add for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
document version 0.2 28
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
10.0 Mechanical Characteristics
document version 0.2 29
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
document version 0.2 30
Product Specification
AU OPTRONICS CORPORATION
11. Packing Specification
M185 14
料號
料號
料號料號
Carton:81.18M02.008 /Cushion:84.18M02.037
將
依序放入包裝隔板中
片裝
片裝
片裝片裝
:
M185
模組置入靜電袋中並折疊後
:48.5*37.2*34.8cm
M185XTN01.2
放置14片，放入上蓋緩衝，封箱完成
單層
單層
pallet
document version 0.2 31
單層單層
打棧示意圖
打棧示意圖
打棧示意圖打棧示意圖
Product Specification
M185XTN01.2
AU OPTRONICS CORPORATION
Pallet and shipment information
Item
Panel
Cushion
Box
Pallet
Q'ty
1
1
1
14 pcs/Box
1
24 boxes/pallet 1150(L)mm x 980(W)mm x 138(H)mm
1
2
3
4
5
Packing Box
6 Pallet after Packing
Specification
430.37(H)mm x 254.6(V)mm x 9.9(D)mm
485(L)mm x 372(W)mm x 348(H)mm
485(L)mm x 372(W)mm x 348(H)mm
1150(L)mm x 980(W)mm x 138(H)mm
Dimension
-
Weight(kg)
1.330
1.
125
1.00
20.745
15
509
without Panel & cushion
Remark
with panel & cushion
document version 0.2 32
Loading...