Product Specification
) Preliminary Specifications
(
( V ) Final Specifications
Module 15.6”HD 16:9 Color TFT-LCD
with LED Backlight design
AU OPTRONICS CORPORATION
Model Name
Note ( )
Customer Date
www.jxlcd.com
www.jxlcd.com
Checked &
Approved by
B156XW02 V6 (H/W:0A)
LED Backlight with driving circuit design
Date
Approved by Date
Claire.Yu
Prepared by Date
03/10/2011
Note: This Specification is subject to change
without notice.
Derek Liu
NBBU Marketing Division
AU Optronics corporation
03/10/2011
B156XW02 V6 Document Version : 1.3
1 of 30
Product Specification
AU OPTRONICS CORPORATION
Contents
6.1 Pixel Format Image .............................................................................................................................3
9.1 Shipping Label Format........................................................................................................................3
1. Handling Precautions .............................................................. 4
2. General Description ................................................................ 5
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
3. Functional Block Diagram ..................................................... 11
4. Absolute Maximum Ratings................................................... 12
4.1 Absolute Ratings of TFT LCD Module.............................................................................................12
4.2 Absolute Ratings of Environment .....................................................................................................12
5. Electrical Characteristics....................................................... 13
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit ...................................................................................................................................15
6. Signal Interface Characteristic.............................................. 16
6.1 Pixel Format Image ...........................................................................................................................16
6.2 The Input Data Format ......................................................................................................................17
6.3 Integration Interface Requirement.....................................................................................................18
6.4 Interface Timing ................................................................................................................................20
7. Panel Reliability Test ............................................................ 22
www.jxlcd.com
7.1 Vibration Test ....................................................................................................................................22
www.jxlcd.com
7.2 Shock Test .........................................................................................................................................22
7.3 Reliability Test...................................................................................................................................22
8. Mechanical Characteristics.................................................... 23
8.1 LCM Outline Dimension...................................................................................................................23
8.2 Screw Hole Depth and Center Position.............................................................................................25
9. Shipping and Package ........................................................... 26
9.1 Shipping Label Format......................................................................................................................26
9.2 Carton Package..................................................................................................................................27
9.3 Shipping Package of Palletizing Sequence........................................................................................27
10. Appendix: EDID Description................................................ 28
B156XW02 V6 Document Version : 1.3
2 of 30
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
0.0 2009/11/20 All First Edition for Customer
0.1 2009/12/29 28 Modify EDID (69.3MHz)
0.2 2010/01/13 23 Modify Outline Drawing
0.3 2010/01/18 20
1.0 2010/04/01 6 Color / Chromaticity Coodinates
1.1 2010/05/26 15 5.2.1 LED characteristics
Backlight Power Consumption: TBD
5.2.2 Backlight input signal
characteristics
PWM Input Frequency: TBD
16
18
19 6.3.2 Pin Assignment
20 6.4.1 Timing Characteristics 6.4.1 Timing Characteristics Update
28 10. Appendix: EDID Description
Final Spec
www.jxlcd.com
www.jxlcd.com
6.1 Pixel Format Image
6.3.1 Connector Description
Checksum 96
Old description New Description Remark
Modify Timing Characteristics
5.2.1 LED characteristics
5.2.2 Backlight input signal
characteristics
6.1 Pixel Format Image Update
Remove compatible word Modify
6.3.2 Pin Assignment Photo
10. Appendix: EDID Description
Checksum 65
Update
Update
Update
Modify
1.2 2011/01/12 21 6.5 Power ON/OFF Sequence
27
1.3 6
23,24
15
5,6
B156XW02 V6 Document Version : 1.3
9.1 Shipping Label Format
Rx:0.54；Ry:0.60
White luminance=180 nits
6.5 Power ON/OFF Sequence
Update Power Sequence Timing &
Image
Add Z30/S03 Label
Rx:0.540；Ry:0.600
Update:standard front and rear view Modify
Add PLED Min&Max Add
2.1 update white lumiance=200 nits Modify
3 of 30
Modify
Add
Modify
Product Specification
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
AU OPTRONICS CORPORATION
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostic breakdown.
www.jxlcd.com
www.jxlcd.com
B156XW02 V6 Document Version : 1.3
4 of 30
Product Specification
Thickness
2. General Description
B156XW02 V6 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the 16:9
HD, 1366(H) x768(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight
driving circuit. All input signals are LVDS interface compatible.
B156XW02 V6 is designed for a display unit of notebook style personal computer and
industrial machine.
AU OPTRONICS CORPORATION
2.1 General Specification
The following items are characteristics summary on the table at 25 ℃ condition:
Items Unit Specifications
Screen Diagonal [mm] 394.91
Active Area [mm] 344.23 X193.54
Pixels H x V 1366x3(RGB) x 768
Pixel Pitch [mm] 0.252X0.252
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally White
www.jxlcd.com
White Luminance (I
(Note: ILED is LED current)
Luminance Uniformity 1.25 max. (5 points)
Contrast Ratio 500 typ
Response Time [ms] 16 Max
www.jxlcd.com
LED
=20mA)
[cd/m2] 200 typ. (5 points average)
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 4.5 max. (Include Logic and Blu power)
Weight [Grams] 450 max.
Physical Size
Include bracket
Electrical Interface 1 channel LVDS
Glass Thickness [mm] 0.5
Surface Treatment Glare, Hardness 3H,
Support Color 262K colors ( RGB 6-bit )
B156XW02 V6 Document Version : 1.3
[mm]
Min. Typ. Max.
Length - 359.3 360
Width - 209.5 210
- - 5.5
Reflection 4.3%
5 of 30
Product Specification
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance RoHS Compliance
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature) :
AU OPTRONICS CORPORATION
[oC]
[oC]
0 to +50
-20 to +60
Item Symbol
White Luminance
I
LED
=20mA
Viewing Angle
Luminance
Uniformity
Luminance
Uniformity
Contrast Ratio CR
Cross talk %
www.jxlcd.com
Response Time
www.jxlcd.com
Red
Color /
Green
Chromaticity
Coodinates
Blue
White
Conditions Min. Typ. Max. Unit Note
θθθθR
θθθθL
ψψψψH
ψψψψL
δδδδ5P
δδδδ
13P
5 points average
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
5 Points
13 Points
- 500 -
4
Tr Rising
Tf Falling
TRT Rising + Falling
Rx
Ry
Gx
Gy
Bx
CIE 1931
By
Wx
Wy
- 200 -
40
40
10
30
45
45
15
35
-
-
-
-
- - 1.25
- - 1.50
-
-
-
- - -
- 16
0.540 0.572 0.600
0.313 0.343 0.373
0.316 0.346 0.376
0.521 0.551 0.581
0.127 0.157 0.187
0.093 0.123 0.153
0.283 0.313 0.343
0.299 0.329 0.359
cd/m
degree
msec
2
1, 4, 5.
4, 9
1, 3, 4
2, 3, 4
4, 6
4, 7
4, 8
4
NTSC %
B156XW02 V6 Document Version : 1.3
- 45 -
6 of 30
Product Specification
=
Maximum Brightness of thirteen points
Minimum Brightness of thirteen points
Maximum Brightness of five
points
=
Minimum Brightness of five points
Note 1: 5 points position (Ref: Active area)
H /4
H /4
AU OPTRONICS CORPORATION
W / 4 W /4 W / 4 W / 4
W
1 2
H
H /4
H /4
Note 2: 13 points position (Ref: Active area)
W /4
1 0
1 0
H /4
www.jxlcd.com
www.jxlcd.com
H /4
H
H /4
1
6
3
4
W
W /4
4 5
W /4
2
7
5
W /4
1 0
3
8
9
H /4
1 0
1 1
1 2
Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by the
minimum test point luminance
δ
W5
1 0
1 3
δ
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting
B156XW02 V6 Document Version : 1.3
W13
7 of 30
Product Specification
Field=2
°
Contrast ratio (CR)=
Brightness on the “White” state
Brightness on the “Black” state
AU OPTRONICS CORPORATION
Backlight for 30 minutes in a stable, windless and dark room, and it should be measured in the center of screen.
Photo detector
Note 5： Definition of Average Luminance of White (YL):
Measure the luminance of gray level 63 at 5 points，Y
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6： Definition of contrast ratio:
Note 7： Definition of Cross Talk (CT)
CT = | YB – YA | / YA × 100 (%)
Where
www.jxlcd.com
www.jxlcd.com
Contrast ratio is calculated with the following formula.
= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
B156XW02 V6 Document Version : 1.3
8 of 30
Product Specification
Note 8: Definition of response time:
The output signals of BM-7 or equivalent are measured when the input signals are changed from “Black” to
“White” (falling time) and from “White” to “Black” (rising time), respectively. The response time interval between
the 10% and 90% of amplitudes. Refer to figure as below.
AU OPTRONICS CORPORATION
"Black"
100%
S
i
90%
g
n
a
l
(
R
e
l
a
t
i
v
www.jxlcd.com
e
www.jxlcd.com
v
a
l
u
10%
e
)
0%
Tr
Tf
"White""White"
B156XW02 V6 Document Version : 1.3
9 of 30
Loading...