AU Optronics B133EW07-V2 Product Specification

Product Specification
( ( V ) Final Specifications
Module 13.3”(13.28”) WXGA Color TFT-LCD with LED Backlight design
Model Name B133EW07 V2 (H/W:0A)
AU OPTRONICS CORPORATION
Note ( )
LED Backlight without driving circuit design
Customer Date
www.jxlcd.com
www.jxlcd.com
Checked &
Approved by
Date
Approved by Date
CH Lin
Prepared by
2/25/2010
Note: This Specification is subject to change without notice.
Kevin Shen
NBBU Marketing Division /
AU Optronics corporation
2/25/2010
B133EW07 V2 Document Version : 1.0
1 of 32
Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 4
2. General Description ................................................................ 5
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
3. Functional Block Diagram ..................................................... 11
4. Absolute Maximum Ratings................................................... 12
4.1 Absolute Ratings of TFT LCD Module.............................................................................................12
4.2 Absolute Ratings of Environment .....................................................................................................12
5. Electrical characteristics ....................................................... 13
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit ...................................................................................................................................15
6. Signal Characteristic ............................................................. 16
6.1 Pixel Format Image ...........................................................................................................................16
6.2 The input data format ........................................................................................................................17
6.3 Integration Interface and Pin Assignment..........................................................................................18
6.4 Interface Timing ................................................................................................................................20
7. Vibration and Shock Test ...................................................... 23
7.1 Vibration Test ....................................................................................................................................23
7.2 Shock Test Spec:................................................................................................................................23
www.jxlcd.com
7.3 Reliability Test...................................................................................................................................23
www.jxlcd.com
8. Mechanical Characteristics.................................................... 24
8.1 LCM Outline Dimension...................................................................................................................24
9. Shipping and Package ........................................................... 26
9.1 Shipping Label Format......................................................................................................................26
9.2 Carton package..................................................................................................................................27
9.3 Shipping package of palletizing sequence.........................................................................................28
10. Appendix: EDID description ................................................ 29
B133EW07 V2 Document Version : 1.0
2 of 32
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
1.0 2010/2/25 All Final spec
Old description New Description Remark
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
3 of 32
Product Specification
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
AU OPTRONICS CORPORATION
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a LED light bar build in as a light source of back light unit. It can prevent electrostic breakdown.
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
4 of 32
Product Specification
Thickness
2. General Description
B133EW07 V2 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the WXGA (1280(H) x 800(V)) screen and 262k colors (RGB 6-bits data driver) without LED backlight driving circuit. All input signals are LVDS interface compatible.
B133EW07 V2 is designed for a display unit of notebook style personal computer and industrial machine.
AU OPTRONICS CORPORATION
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 337.8 ,13.3W”(13.28)
Active Area [mm] 286.08 X178.8
Pixels H x V 1280x3(RGB) x 800
Pixel Pitch [mm] 0.2235X0.2235
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally White
www.jxlcd.com
White Luminance
(Note: ILED is LED current)
Luminance Uniformity 50 max. (160 points) Contrast Ratio 500 typ, 400min Response Time [ms] 8 typ / 16 Max
www.jxlcd.com
[cd/m2] 330 typ. 300min
ILED=23 mA @94% duty cycle
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 4.36 W @ Black (typical, the logic plus the
backlight @94% duty cycle @23mA, 3.3V forward bias voltage)
Weight [Grams] 300typ., 310 max. Physical Size
Electrical Interface 1 channel LVDS
Glass Thickness [mm] 0.5
Surface Treatment Glare, Hardness 3H,
B133EW07 V2 Document Version : 1.0
[mm]
Min. Typ. Max.
Length - 297.15 -
Width - 203.15 -
- - 3.6
5 of 32
Product Specification
pliance
Support Color 262K colors ( RGB 6-bit )
AU OPTRONICS CORPORATION
Temperature Range
Operating Storage (Non-Operating)
RoHS Compliance RoHS Com
[oC] [oC]
0 to +50
-20 to +60
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature) :
Item Symbol
White Luminance 160 points average 300 330 -
θθθθR θθθθL
Viewing Angle
ψψψψH ψψψψL
Luminance
Uniformity
Contrast Ratio CR
Cross talk %
Response Time
Color /
Chromaticity
Coodinates
www.jxlcd.com
www.jxlcd.com
Red
Green
Blue
White
δδδδ
160P
Tr Rising
Tf Falling
TRT Rising + Falling
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
Conditions Min. Typ. Max. Unit Note
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
160 Points
400 500 -
Optical 2.0
CIE 1931
65
65
40
50
50 - -
-
- - -
- 16 25
0.620 0.640 0.660
0.315 0.330 0.345
0.290 0.310 0.330
0.590 0.610 0.630
0.120 0.150 0.170
0.040 0.060 0.080
0.297 0.313 0.329
0.313 0.329 0.345
70
70
45
55
-
2
cd/m
-
degree
-
-
-
-
msec
1, 4, 5.
4, 9
2, 3, 4
4, 6
4, 7
4, 8
4
NTSC %
B133EW07 V2 Document Version : 1.0
- 72 -
6 of 32
Product Specification
=
Maximum Brightness of thirteen points
Minimum
Brightness of thirteen points
Maximum Brightness of five
points
=
Minimum Brightness of five points
Note 1: 5 points position (Ref: Active area)
H /4
H /4
AU OPTRONICS CORPORATION
W / 4 W /4 W / 4 W / 4
W
1 2
H
H /4
H /4
Note 2: 13 points position (Ref: Active area)
W /4
1 0
1 0
H /4
www.jxlcd.com
www.jxlcd.com
H /4
H
H /4
1
6
3
4
W
W /4
4 5
W /4
2
7
5
W /4
1 0
3
8
9
H /4
1 0
1 1
1 2
Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by the minimum test point luminance
δ
W5
1 0
1 3
δ
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting
B133EW07 V2 Document Version : 1.0
W13
7 of 32
Product Specification
Field=2
°
Contrast ratio (CR)=
Brightness on the “White” state
Brightness on the “Black” state
AU OPTRONICS CORPORATION
Backlight for 30 minutes in a stable, windless and dark room, and it should be measured in the center of screen.
Photo detector
Note 5 Definition of Average Luminance of White (YL):
Measure the luminance of gray level 63 at 5 pointsY
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6 Definition of contrast ratio:
Note 7 Definition of Cross Talk (CT)
CT = | YB – YA | / YA × 100 (%)
Where
www.jxlcd.com
www.jxlcd.com
Contrast ratio is calculated with the following formula.
= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
B133EW07 V2 Document Version : 1.0
8 of 32
Product Specification
Note 8: Definition of response time:
The output signals of BM-7 or equivalent are measured when the input signals are changed from “Black” to
“White” (falling time) and from “White” to “Black” (rising time), respectively. The response time interval between
the 10% and 90% of amplitudes. Refer to figure as below.
AU OPTRONICS CORPORATION
"Black"
100%
S i
90%
g n a l
(
R e
l
a t
i
v
www.jxlcd.com
e
www.jxlcd.com
v a l
u
10%
e )
0%
Tr
Tf
"White""White"
B133EW07 V2 Document Version : 1.0
9 of 32
Product Specification
Note 9. Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and
180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90°
(θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is
AU OPTRONICS CORPORATION
typically perpendicular to the display surface with the screen rotated about its center to develop the desired
measurement viewing angle.
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
10 of 32
Product Specification
3. Functional Block Diagram
The following diagram sho ws the functional block of the 13.3 inches wide Color TFT/LCD 30 Pin (One CH/connector Module)
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
11 of 32
Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
An absolute maximum rating of the module is as following:
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage
Vin -0.3 +4.0 [Volt] Note 1,2
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit Conditions
Operating Temperature
Operation Humidity HOP 5 95 [%RH] Note 4
Storage Temperature
Storage Humidity HST
Note 1: At Ta (25 )
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: LED specification refer to section 5.2
Note 4: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).
TOP 0 +50 [oC] Note 4
TST -20 +60 [oC] Note 4
5 95
[%RH]
Note 4
Twb=39°C
www.jxlcd.com
www.jxlcd.com
Operating Range
Storage Range
B133EW07 V2 Document Version : 1.0
12 of 32
Product Specification
Voltage
-
90%
10%
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows;
The power specification are measured under 25 and frame frenquency under 60Hz
AU OPTRONICS CORPORATION
Symble Parameter Min Typ Max Units
VDD Logic/LCD Drive
PDD VDD Power IDD IDD Current
I
Rush
Inrush Current
VDDrp Allowable
Logic/LCD Drive Ripple Voltage
Note 1 : Maximum Measurement ConditionBlack Pattern at 3.3V driving voltage. (P
Note 2Measure Condition
www.jxlcd.com
www.jxlcd.com
3.0 3.3 3.6 [Volt]
- 0.9 [Watt] Note 1
- 220
-
- -
700 1500 [mA]
250
100 [mV]
[mA]
p-p
Note 1
Note 2
Note
max=V3.3
x I
black
)
3.3V
0V
0.5ms
Vin rising time
B133EW07 V2 Document Version : 1.0
13 of 32
Product Specification
5.1.2 Signal Electrical Characteristics
Input signals shall be low or High-impedance state when VDD is off.
Signal electrical characteristics are as follows;
AU OPTRONICS CORPORATION
Parameter
VTH
VTL
VCM
Note: LVDS Signal Waveform
www.jxlcd.com
Differential Input High Threshold (Vcm=+1.2V)
Differential Input Low Threshold (Vcm=+1.2V)
Differential Input Common Mode Voltage
www.jxlcd.com
Condition Min Max Unit
-100
0.8
+100
[mV]
-
2.0
[mV]
[V]
B133EW07 V2 Document Version : 1.0
14 of 32
AU OPTRONICS CORPORATION
Product Specification
5.2 Backlight Unit
Parameter guideline for LED
LED Parameter guideline for LED driving selection (Ref. Remark 1)
Parameter
Backlight Power Consumption
Symbol
PLED -- -- 3.2
Min Typ Max Units
Condition
[Watt]
(Ta=25)
LED Forward Current
LED Power consumption
LED Life-Time
Output PWM frequency
Duty ratio @20kHZ
Note 1: Calculator value for reference P
Note 2: The LED life-time define as the estimated time to 50% degradation of initial luminous.
Note 3: Totally using 54 Led bins
www.jxlcd.com
www.jxlcd.com
IF -- 20 30
P
-- 4 --
LED
N/A 10,000 -- --
F
100 200 20K
PWM
-- 5 -- 100
= VF (Normal Distribution) * IF (Normal Distribution) / Efficiency
LED
[mA]
[Watt]
Hour
Hz
%
(Ta= 25)
(Ta=25)
Note 1
(Ta=25), Note 2
IF=20 mA
B133EW07 V2 Document Version : 1.0
15 of 32
Product Specification
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1
AU OPTRONICS CORPORATION
1280
1st Line
800th Line
R G B R G B
R G B R G B
www.jxlcd.com
www.jxlcd.com
R G B R G B
R G B R G B
B133EW07 V2 Document Version : 1.0
16 of 32
Product Specification
Data Clock
6.2 The input data format
Signal Name
R5 R4 R3 R2 R1 R0
Description
Red Data 5 (MSB) Red Data 4 Red Data 3 Red Data 2 Red Data 1 Red Data 0 (LSB)
Red-pixel Data
AU OPTRONICS CORPORATION
Red-pixel Data Each red pixel's brightness data consists of these 6 bits pixel data.
G5 G4 G3 G2 G1 G0
B5 B4 B3 B2 B1 B0
RxCLKIN
DE Display Timing This signal is strobed at the falling edge of
VS Vertical Sync The signal is synchronized to RxCLKIN . HS Horizontal Sync The signal is synchronized to RxCLKIN .
Note: Output signals from any system shall be low or High-impedance state when VDD is off.
Green Data 5 (MSB) Green Data 4 Green Data 3
www.jxlcd.com
Green Data 2
www.jxlcd.com
Green Data 1 Green Data 0 (LSB)
Green-pixel Data Blue Data 5 (MSB) Blue Data 4 Blue Data 3 Blue Data 2 Blue Data 1 Blue Data 0 (LSB)
Blue-pixel Data
Green-pixel Data Each green pixel's brightness data consists of these 6 bits pixel data.
Blue-pixel Data Each blue pixel's brightness data consists of these 6 bits pixel data.
The signal is used to strobe the pixel data and DE signals. All pixel data shall be valid at the falling edge when the DE signal is high.
RxCLKIN. When the signal is high, the pixel data shall be valid to be displayed.
B133EW07 V2 Document Version : 1.0
17 of 32
Product Specification
6.3 Integration Interface and Pin Assignment
6.3.1 Connector Description
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following components.
Connector Name / Designation For Signal Connector
Manufacturer IPEX or compatible
AU OPTRONICS CORPORATION
Type / Part Number
Mating Housing/Part Number
IPEX 20474-030E-12
IPEX 20472-030E-12
or compatible
or compatible
6.3.2 Pin Assignment
LVDS is a differential signal technology for LCD interface and high speed data transfer device.
Pin Symbol Description
1 GND Ground
2 Vcc Power Supply (+3.3V)
3 V
4 V
www.jxlcd.com
www.jxlcd.com
5 Vsync Vsync
6 Clk
7 DATA
8 Rin0- Differential Data Input
9 Rin0+ Differential Data Input
Power Supply (+3.3V)
analog
DDC Power +3.3V
EDID
DDC Clock
EDID
DDC Data
EDID
10 GND Ground
11 Rin1- Differential Data Input
12 Rin1+ Differential Data Input
13 GND Ground
14 Rin2- Differential Data Input
15 Rin2+ Differential Data Input
16 GND Ground
17 Clkin- Differential Clock Input
18 Clkin+ Differential Clock Input
19 GND Ground
20 NC NC
21 Vdc(1 &2) LED Annold (Positive)
22 Vdc(3&4) LED Annold (Positive)
B133EW07 V2 Document Version : 1.0
18 of 32
23 NC NC
24 Vdc1 LED Cathode (Negative)
25 Vdc2 LED Cathode (Negative)
26 Vdc3 LED Cathode (Negative)
27 Vdc4 LED Cathode (Negative)
28 Vdc5 LED Cathode (Negative)
29 Vdc6 LED Cathode (Negative)
30 NC NC
Note: Connector Diagram
Product Specification
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
PIN #30
PIN #1
B133EW07 V2 Document Version : 1.0
19 of 32
Product Specification
6.4 Interface Timing
6.4.1 Timing Characteristics
Basically, interface timings should match the 1280x800 /60Hz manufacturing guide line timing.
AU OPTRONICS CORPORATION
Signal Parameter Symbol Min Typ Max
D
Clock Period
CLK
DE
(Data Enable
Only)
(DTMG)
Data
Clock Frequency
Duty Ratio (% High)
Rise Time
Fall Time
DE Setup Time
Data Setup Time
Data Hold Time
Horizontal Period
Horizontal Blank Period
Vertical Period
T
T
T
C
fC
Kdr
R CLK
F CLK
T
se
Tsd
Thd
TH
Tha
TV
13.79
72.50
40
-
-
4
4
2
50
4.42
4.42
-
-
-
1440
160
823
60
-
-
-
-
-
Unit
ns
MHz
%
ns
ns
ns
ns
ns
TC
TC
TH
ote
1
1/T
C
TCh /TC
2
fV=59.94 Hz, 3
www.jxlcd.com
www.jxlcd.com
Vertical Blank Period
H
H
sync
Horizontal Active Period
V
V
sync
Vertical Active Period
Note: (1) When the WXGA+ controller sets DE Mode, and H
be longer than 1 clock period (TC) at every horizontal sync period;
(2) Horizontal Period = One Line Scanning Time;
Back Porch
sync
H
Pulse Width
sync
H
Front Porch
sync
Back Porch
sync
V
Pulse Width
sync
V
Front Porch
sync
T
wvb
H
bp
T
WH
Hfp
THD
V
bp
TWV
Vfp
TVD
1280
800
sync
23
80
32
48
1280
14
800
and V
TH
1280
6
3
sync
800
are required. The duration of DE (DTMG) signal must
T
TC
TC
TC
T
TH
TH
TH
C
Display Period
H
Display Period
(3) The vertical period T
B133EW07 V2 Document Version : 1.0
is related to the frame frequency fV, i.e., 60 Hz.
V
20 of 32
6.4.2 Timing diagram
T
CLOCK
DOTCLK
Input
Data
DE
DE
www.jxlcd.com
www.jxlcd.com
Invaild
Data
Product Specification
AU OPTRONICS CORPORATION
Input Timing Definition ( DE Mode)
Pixel
1
T
HB
T
VB
Pixel
2
T
Pixel
3
T
HD
H
T
V
Pixel
N-1
T
VD
Pixel
N
Invaild
Data
Pixel
1
B133EW07 V2 Document Version : 1.0
21 of 32
Product Specification
6.4.3 Power ON/OFF Sequence
VDD power on/off sequence is as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off
AU OPTRONICS CORPORATION
Power Sequence Timing
Value
Parameter
www.jxlcd.com
www.jxlcd.com
T1 0.5 - 10
T2 0 - 50
T3 200 - -
T4 0.5 - 10
T5 10 - -
T6 10 - -
T7 0 - -
T8 10 - -
T9 0 - 10
T10 200 - -
T11 0.5 - 50
T12 0 - 10
Min. Typ. Max.
Units
ms
T13 400 -- -
B133EW07 V2 Document Version : 1.0
22 of 32
Product Specification
7. Vibration and Shock Test
7.1 Vibration Test
Test Spec:
Test method: Non-Operation
Acceleration: 3 G
Frequency: 5 - 150Hz Random
Sweep: 30 Minutes each Axis (X, Y, Z)
7.2 Shock Test Spec:
Test Spec:
Test method: Non-Operation
Acceleration: 220 G , Half sine wave
AU OPTRONICS CORPORATION
Active time: 2 ms
Pulse: X,Y,Z .one time for each side
7.3 Reliability Test
Items
www.jxlcd.com
www.jxlcd.com
Temperature
Humidity Bias
High Temperature
Operation
Low Temperature
Operation
High Temperature
Storage
Low Temperature
Storage
Thermal Shock
Test
Required Condition Note
Ta= 50℃℃, 90%RH, 240h
Ta= 50℃℃, 500h
Ta= 0℃℃, 500h
Ta= 65℃℃, 500h
Ta= -25℃℃, 500h
Ta=-25℃℃to 65℃℃℃℃, 5min transfer time, 100 cycles
ESD
Note1: According to EN 61000-4-2 , ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
Remark: MTBF (Excluding the LED): 30,000 hours with a confidence level 90%
B133EW07 V2 Document Version : 1.0
Contact : ±8 KV
Air : ±15 KV
Note 1
23 of 32
Product Specification
8. Mechanical Characteristics
8.1 LCM Outline Dimension
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
24 of 32
Product Specification
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
Note: Prevention IC damage, IC positions not allowed any overlap over these areas.
B133EW07 V2 Document Version : 1.0
25 of 32
Product Specification
AU OPTRONICS CORPORATION
9. Shipping and Package
9.1 Shipping Label Format
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
26 of 32
Product Specification
9.2 Carton package
The outside dimension of carton is 435 (L)mm x 377 (W)mm x 335 (H)mm
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
27 of 32
Product Specification
9.3 Shipping package of palletizing sequence
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
28 of 32
Product Specification
10. Appendix: EDID description
2 B133EW07 Value Value Note
Header
Header
HeaderHeader
00 00000000 0
FF 11111111 255
FF 11111111 255
FF 11111111 255
FF 11111111 255
FF 11111111 255
FF 11111111 255
EISA Manuf. Code LSB
EISA Manuf. Code LSB
EISA Manuf. Code LSBEISA Manuf. Code LSB
Compressed ASCII
Compressed ASCII
Compressed ASCIICompressed ASCII
Product
Product Code
Product Product
hex, LSB first
hex, LSB first
hex, LSB firsthex, LSB first
32
32----bit ser #
3232
Week of manufacture
Week of manufacture
Week of manufactureWeek of manufacture
Year of manufacture
Year of manufacture
Year of manufactureYear of manufacture
EDID Structure Ver.
EDID Structure Ver.
EDID Structure Ver.EDID Structure Ver.
EDID revision #
EDID revision #
EDID revision #EDID revision #
Video input definition
Video input definition
Video input definitionVideo input definition
Max H image size
Max H image size
Max H image sizeMax H image size
Max V image size
Max V image size
Max V image sizeMax V image size
Display Gamma
Display Gamma
Display GammaDisplay Gamma Feature support
Feature support
Feature supportFeature support
Red/green low bits
Red/green low bits
Red/green low bitsRed/green low bits Blue/white low bits
Blue/white low bits
Blue/white low bitsBlue/white low bits
Red x/ high bits
Red x/ high bits
Red x/ high bitsRed x/ high bits
Established timing 1
Established timing 1
Established timing 1Established timing 1
Established timing 2
Established timing 2
Established timing 2Established timing 2
Manufacturer's Tim
Manufacturer's Timing
Manufacturer's TimManufacturer's Tim
Standard timing #1
Standard timing #1
Standard timing #1Standard timing #1
Code
CodeCode
bit ser #
bit ser #bit ser #
01 00000001 1
01 00000001 1
01 00000001 1
www.jxlcd.com
www.jxlcd.com
Red y
Red y
Red yRed y
Green x
Green x
Green xGreen x Green y
Green y
Green yGreen y
Blue x
Blue x
Blue xBlue x Blue y
Blue y
Blue yBlue y
White x
White x
White xWhite x White y
White y
White yWhite y
ing
inging
01 00000001 1
AU OPTRONICS CORPORATION
HEX BIN DEC
00 00000000 0
06 00000110 6
10 00010000 16 0 00001(A) 10000(P) 10000(P)
CB 11001011 203 9CCB (apple assigned code)
9C 10011100 156
01 00000001 1
01 00000001 1
13 00010011 19
01 00000001 1
03 00000011 3
80 10000000 128 Digital Input
1D 00011101 29
12 00010010 18
78 01111000 120
0A 00001010 10 no DPMS,Active off,RGB color
C5 11000101 197
95 10010101 149
A3 10100011 163 Rx=0.640
57 01010111 87 Ry=0.340
4F 01001111 79 Gx=0.310
9C 10011100 156 Gy=0.610
26 00100110 38 Bx=0.150
0F 00001111 15 By=0.060
50 01010000 80 Wx=0.313
54 01010100 84 Wy=0.329
00 00000000 0 unused
00 00000000 0
00 00000000 0
01 00000001 1 unused
APP9CCB
APP9CCB
APP9CCBAPP9CCB
unused
unused
unusedunused
Week 1
Week 1
Week 1Week 1
19(2
19(2009
009----1990=19)
19(219(2
009009
28.6cm
28.6cm
28.6cm28.6cm
17.9cm
17.9cm
17.9cm17.9cm
Gamma 2
Gamma 2.2
Gamma 2Gamma 2
1990=19)
1990=19)1990=19)
.2
.2.2
B133EW07 V2 Document Version : 1.0
29 of 32
Product Specification
Standard timing #2
Standard timing #2
Standard timing #2Standard timing #2
01 00000001 1
Standard timing #3
Standard timing #3
Standard timing #3Standard timing #3
01 00000001 1
Standard timing #4
Standard timing #4
Standard timing #4Standard timing #4
01 00000001 1
Standard t
Standard timing #5
Standard tStandard t
Standard timing #6
Standard timing #6
Standard timing #6Standard timing #6
Standard timing #7
Standard timing #7
Standard timing #7Standard timing #7
Standard timing #8
Standard timing #8
Standard timing #8Standard timing #8
Pixel Clock/10,000 (LSB)
Pixel Clock/10,000 (LSB)
Pixel Clock/10,000 (LSB)Pixel Clock/10,000 (LSB)
Pixel Clock/10,000 (MSB)
Pixel Clock/10,000 (MSB)
Pixel Clock/10,000 (MSB)Pixel Clock/10,000 (MSB)
Horiz. Active pixels(Lower 8 bits)
Horiz.Blanking (Lower 8 bits) 8F 10001111 143
Horiz. Active pixels:Horiz.
Blanking (Upper4:4 bits) 50 01010000 80
Vert. Active pixels:Vert. Blanking
(Upper4:4 bits) 30 00110000 48
Vert. Sync. Offset=xx lines, Sync
Width=xx lines 36 00110110 54
Horz. Ver. Sync/Width (upper 2
Hori. Image size (Lower 8 bits) 1E 00011110 30
Vert. Image size (Lower 8 bits) B3 10110011 179
Hori. Image size : Vert. Image size
Detailed timing/monitor
Detailed timing/monitor
Detailed timing/monitorDetailed timing/monitor
descriptor #2
descriptor #2
descriptor #2descriptor #2
Apple edid signature
Apple edid signature
Link Type (LVDS Link,MSB
Pixel and link component
format (6-bit panel interface)
iming #5
iming #5iming #5
01 00000001 1
01 00000001 1
01 00000001 1
01 00000001 1
20 00100000 32
2E 00101110 46
www.jxlcd.com
www.jxlcd.com
30 00110000 48
20 00100000 32
bits) 00 00000000 0
(Upper 4 bits) 10 00010000 16
00 00000000 0
00 00000000 0
18 00011000 24
00 00000000 0
Version
justified)
AU OPTRONICS CORPORATION
01 00000001 1
01 00000001 1
01 00000001 1
01 00000001 1
01 00000001 1
01 00000001 1
01 00000001 1
52 01010010 82
1C 00011100 28
00 00000000 0
00 00000000 0
00 00000000 0
01 00000001 1
00 00000000 0
06 00000110 6
10 00010000 16
20 00100000 32
00 00000000 0
Timing Descriptor #1
1280x800 @60_mode:pixel
1280x800 @60_mode:pixel
1280x800 @60_mode:pixel 1280x800 @60_mode:pixel
clock=
clock=72.5
72.5MHz
72.572.5
MHz
MHzMHz
clock=clock=
Horiz active=1280 pixels
Horiz active=1280 pixels
Horiz active=1280 pixelsHoriz active=1280 pixels
Horiz blanking=143pixels
Horiz blanking=143pixels
Horiz blanking=143pixelsHoriz blanking=143pixels
Vertcal active=800 lines
Vertcal active=800 lines
Vertcal active=800 linesVertcal active=800 lines
Vertical blanking=46 lines
Vertical blanking=46 lines
Vertical blanking=46 linesVertical blanking=46 lines
Horiz sync. Offset=48 pixels
Horiz sync. Offset=48 pixels
Horiz sync. Offset=48 pixelsHoriz sync. Offset=48 pixels
Horiz sync. Pulse Width=32 pixel
Horiz sync. Pulse Width=32 pixelssss
Horiz sync. Pulse Width=32 pixelHoriz sync. Pulse Width=32 pixel
Verti sync. Offset=3 lines,Sync
Verti sync. Offset=3 lines,Sync
Verti sync. Offset=3 lines,Sync Verti sync. Offset=3 lines,Sync
Width=6 lines
Width=6 lines
Width=6 linesWidth=6 lines
Hori image size= 286 mm
Hori image size= 286 mm
Hori image size= 286 mmHori image size= 286 mm Verti image size = 179mm
Verti image size = 179mm
Verti image size = 179mmVerti image size = 179mm
Horizontal Border = 0
Horizontal Border = 0
Horizontal Border = 0 Horizontal Border = 0
Vertical Border = 0
Vertical Border = 0
Vertical Border = 0 Vertical Border = 0
For apple
For apple
For apple
For apple
For apple
For apple
B133EW07 V2 Document Version : 1.0
30 of 32
Panel features (No inverter)
0A 00001010 10
20 00100000 32
Detailed timing/monitor
Detailed timing/monitor
Detailed timing/monitorDetailed timing/monitor
descriptor #3
descriptor #3
descriptor #3descriptor #3
00 00000000 0
FE 11111110 254
00 00000000 0
42 01000010 66 B
31 00110001 49 1
33 00110011 51 3
33 00110011 51 3
45 01000101 69 E
57 01010111 87 W
30 00110000 48 0
37 00110111 55 7
www.jxlcd.com
www.jxlcd.com
20 00100000 32
56 01010110 86 V
32 00110010 50 2
0A 00001010 10
20 00100000 32
Detailed timing/monitor
Detailed timing/monitor
Detailed timing/monitorDetailed timing/monitor
descriptor #4
descriptor #4
descriptor #4descriptor #4
00 00000000 0
FE 11111110 254
00 00000000 0
43 01000011 67 C
6F 01101111 111 o
6C 01101100 108 l
6F 01101111 111 o
72 01110010 114 r
20 00100000 32
4C 01001100 76 L
43 01000011 67 C
44 01000100 68 D
0A 00001010 10
20 00100000 32
20 00100000 32
Product Specification
AU OPTRONICS CORPORATION
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
00 00000000 0
For apple
ASCII Data String:B133EW07 V2
ASCII Data String:B133EW07 V2
ASCII Data String:B133EW07 V2ASCII Data String:B133EW07 V2
Mon
Monitor Name: Color LCD
itor Name: Color LCD
MonMon
itor Name: Color LCDitor Name: Color LCD
B133EW07 V2 Document Version : 1.0
31 of 32
Product Specification
Extension Flag
Extension Flag
Extension FlagExtension Flag
Checksum
Checksum
ChecksumChecksum
SUM 6400
AU OPTRONICS CORPORATION
20 00100000 32
00 00000000 0
63 01100011 99
www.jxlcd.com
www.jxlcd.com
B133EW07 V2 Document Version : 1.0
32 of 32
Loading...