AUO
) Preliminary Specifications
( V
( ) Final Specifications
Product Specification
AU OPTRONICS CORPORATION
Module
Model Name
Note ( )
Customer Date
Checked &
Approved by
13.3” WXGA Color TFT-LCD
B133EW04 V3
LED Backlight without
driving circuit design
www.jxlcd.com
www.jxlcd.com
Date
Approved by Date
Howard Lee 11/30/2008
Prepared by Date
Note: This Specification is subject to change without
notice.
NBBU spec. Template 1.0
Johnson Kuo 11/30/2008
NBBU Marketing Division /
AU Optronics corporation
1 of 32
Product Specification
AUO
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 4
2. General Description ................................................................ 5
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
3. Functional Block Diagram ....................................................... 8
4. Absolute Maximum Ratings..................................................... 9
4.1 Absolute Ratings of TFT LCD Module...............................................................................................9
4.2 Absolute Ratings of Backlight Unit.....................................................................................................9
4.3 Absolute Ratings of Environment .......................................................................................................9
5. Electrical characteristics ....................................................... 10
5.1 TFT LCD Module..............................................................................................................................10
5.2 Backlight Unit ...................................................................................................................................12
6. Signal Characteristic ............................................................. 13
6.1 Pixel Format Image ...........................................................................................................................13
6.2 The input data format ........................................................................................................................14
6.3 Signal Description/Pin Assignment...................................................................................................15
6.4 Interface Timing ................................................................................................................................16
7. Connector Description........................................................... 19
7.1 TFT LCD Module..............................................................................................................................19
www.jxlcd.com
8. Dynamic Test ........................................................................ 20
8.1 Vibration Test ....................................................................................................................................20
8.2 Shock Test Spec:................................................................................................................................20
www.jxlcd.com
9. Reliability.............................................................................. 21
10. Mechanical Characteristics.................................................. 22
10.1 LCM Outline Dimension.................................................................................................................22
11. Shipping and Package ......................................................... 26
11.1 Shipping Label Format ....................................................................................................................26
11.2 Carton package ................................................................................................................................27
11.3 Shipping package of palletizing sequence.......................................................................................27
12. Appendix: EDID description ................................................ 29
NBBU spec. Template 1.0
2 of 32
Product Specification
AUO
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
0.1 2008/08/29 All First Edition for Customer
www.jxlcd.com
www.jxlcd.com
Old description New Description Remark
NBBU spec. Template 1.0
3 of 32
Product Specification
AUO
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the LED lamp Reflector edge.
AU OPTRONICS CORPORATION
Instead, press at the far ends of the LED lamp Reflector edge softly. Otherwise the
TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12)
Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13)
Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of
that a LED light bar build in as a light source of back light unit. It can prevent electrostic
breakdown.
www.jxlcd.com
www.jxlcd.com
TFT module
NBBU spec. Template 1.0
4 of 32
Product Specification
AUO
2. General Description
B133EW04 V3 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and backlight system. The screen format is intended to support the WXGA
(1280(H) x 800(V)) screen and 262k colors (RGB 6-bits data driver) without backlight inverter.
All input signals are LVDS interface compatible.
B133EW04 V3 is designed for a display unit of notebook style personal computer and industrial
machine.
AU OPTRONICS CORPORATION
2.1 General Specification
The following items are characteristics summary on the table at 25 ℃ condition:
Items Unit Specifications
Screen Diagonal [mm] 337.8 (13.3W”)
Active Area [mm] 286.08 (H) X 178.8 (V)
Pixels H x V 1280x3(RGB) x 800
Pixel Pitch [mm] 0.2235 x 0.2235
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance
Note: I
Luminance Uniformity % 50 max. (160 points)
Contrast Ratio 500 typ, 400min
LED
www.jxlcd.com
www.jxlcd.com
is lamp current
[cd/m2] 275 typ @ 95% duty cycle
248 min @ 95% duty cycle
Response Time [ms] 16 typ, 25 max
Nominal Input Voltage
Power Consumption [Watt] 4.3 W @ Black ( typical)
Weight
Physical Size
Electrical Interface one channel LVDS
Surface Treatment Glare, Hardness 3H,
NBBU spec. Template 1.0
[Volt] +3.3 typ.
[Grams
[mm]
300(typical), 310 (max.)
L W T
Max 3.6
Typical 297.15 203.15 -
Min -
5 of 32
Product Specification
AUO
RoHS Compliance
Support Color 262K colors ( RGB 6-bit )
AU OPTRONICS CORPORATION
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
[oC]
[oC]
0 to +50
-25 to +65
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature) :
Item Unit Conditions Min. Typ. Max. Note
White Luminance
Viewing Angle
Luminance
Uniformity
CR: Contrast Ratio
Cross talk %
Response Time [msec] Rising + Falling
Chromaticity of color
Coordinates
(CIE 1931)
NTSC
NTSC
NTSCNTSC
www.jxlcd.com
www.jxlcd.com
[cd/m2]
[degree]
[degree]
[degree]
[degree]
%
Red x
%%%%
Green x
160 points average 248 275 -
50/50
Right/left
Up
Down
160 point
400 500 - 1,2,3
Optical 2.0 1,2,3
Red y
Green y
Blue x
Blue y
White x
White y
CIE 1931
40/40
15
30
50 - 1,2
0.575 0.595 0.615
0.325 0.345 0.365
0.300 0.320 0.340
0.535 0.555 0.575
0.135 0.155 0.175
0.125 0.145 0.165
0.297 0.313 0.329
0.313 0.329 0.345
50/50
50/5050/50
25
35
- 16 25
- 45 -
1,2,3
-
-
1,2,3
-
-
1,2,3
NBBU spec. Template 1.0
6 of 32
Product Specification
AUO
AU OPTRONICS CORPORATION
Note 1: The testing conditions are specified in 2.3
Note 2: The definitions of optical characteristics are shown in 2.4
Note 3: Measured at center point. Equivalent performance over the entire panel required
Note 4: Both center point and average of 160 points
www.jxlcd.com
www.jxlcd.com
NBBU spec. Template 1.0
7 of 32
Product Specification
AUO
3. Functional Block Diagram
The following diagram shows the functional block of the 13.3 inches wide Color TFT/LCD Module:
AU OPTRONICS CORPORATION
www.jxlcd.com
www.jxlcd.com
NBBU spec. Template 1.0
8 of 32
Product Specification
AUO
4. Absolute Maximum Ratings
An absolute maximum rating of the module is as following:
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit Conditions
AU OPTRONICS CORPORATION
Logic/LCD Drive Voltage
Vin -0.3 +4.0 [Volt] Note 1,2
4.2 Absolute Ratings of Backlight Unit
Item Symbol Min Max Unit Conditions
LED Current ILED - 35 [mA] rms Note 1,2
4.3 Absolute Ratings of Environment
Item Symbol Min Max Unit Conditions
Operating Temperature
Operation Humidity HOP 5 95 [%RH] Note 3
Storage Temperature
Storage Humidity HST
Note 1: At Ta (25℃ )
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).
www.jxlcd.com
www.jxlcd.com
TOP 0 +50 [oC] Note 3
TST -20 +60 [oC] Note 3
5 95
Twb=39°C
[%RH]
Note 3
Operating Range
NBBU spec. Template 1.0
Storage Range
9 of 32
Product Specification
AUO
-
90%
10%
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows;
AU OPTRONICS CORPORATION
Symble Parameter Min Typ Max Units
VDD Logic/LCD Drive
PDD VDD Power
IDD IDD Current
I
Rush
Inrush Current
VDDrp Allowable
Logic/LCD Drive
Ripple Voltage
Note 1 : Maximum Measurement Condition：Black Pattern
Note 2：Typical Measurement Condition: Mosaic Pattern
Note 3：Measure Condition
www.jxlcd.com
www.jxlcd.com
3.0 3.3 3.6 [Volt]
0.9 [Watt] Note 1/2
- 220
- 0.7
- -
250
1.5
100
[mA]
[A]
[mV]
p-p
Note
Note 1/2
Note 3
3.3V
0V
0.5ms
Vin rising time
NBBU spec. Template 1.0
10 of 32
Loading...