AUO T460HVN02.0 Specification

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

Model Name: T460HVN02.0 SKD

46” FHD 60Hz

(For Module Models: T460HVN02.0 / T460HVN02.03)

Issue Date : 2011/11/21

( )Preliminary Specifications

Rev. 00

(ϠϠϠϠ)Final Specifications

Customer Signature Date AUO Date

Approved By

_________________________________

Note

Approval By PM Director CP Wang

Reviewed By RD Director Eugene CC Chen

Reviewed By Project Leader

HsuehHui Lin

Prepare d By PM

Viola Lu

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

No

CONTENTS

RECORD OF REVISIONS 1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION

3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev. 00

Contents

3-4 SIGNAL TIMING WA V EFORM 3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE 4 OPTICAL SPECIFICATION 5 OPEN CELL DRAWING 6 RELIABILITY TEST ITEMS 7 PACKING

7-1 DEFINITION OF LABEL

7-2 PACKING METHODS

7-3 PALLET AND SHIPMENT INFORMATION 8 PRECAUTION

8-1 MOUNTING PRECAUTIONS

8-2 OPERATING PRECAUTIONS

8-3 ELECTROSTATIC DISCHARGE CONTROL

8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

8-5 STORAGE

8-6 HANDLING PRECAUTIONS FOR PROTECT FILM

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Record of Revision

Version Date Page Description

0.0 2011/11/21 First release

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev. 00

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

1. General Description

This specificati on appli es to the 46.0 inch Color TFT-LCD Module T460HVN02.0. This LCD module has a TFT active matrix type liquid crystal panel 1,920x 1,080 pixels, and diagonal size of 46.0 inch. This module supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel col or is determined with a 10-bit gray scal e signal for each dot.

The T460HVN02.0 has been designed to appl y the 10-bit 2 channel LVDS interfac e method. It is intended to support display s where high brightness, wide viewing angle, high color saturation, and high color depth are very important.

Rev. 00

* General Information

Items Specification Unit Note

Active Scr een Size 46.00 inch Display Area 1018.08(H) x 572.67( V ) mm Outline Dim ension 1037.68(H) x 592.27( V ) mm Driver Element a-Si TFT active matrix Display Color s 10 bit, 1073.7M Colors Number of Pixels 1,920x1,080 Pixel Pixel Pitch 0.53025 (H) x 0.53025 (W) mm Pixel Arrangement RGB vertical stripe Display Operation Mode Normally Black Surface Treatment Anti-Glare, 3H Haze=2% Rotate Function Unachievable Note 1

Note 1: Rotate Function refers to LCD display could be able to rotate.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev. 00

2. Absolute Maximum Ratings

The followings are max im um v alues which, if exceeded, may cause faulty operation or damage to the unit

Item Symbol Min Max Unit Conditions

Logic/LCD Drive V oltage VDD -0.3 14 [Volt] Note 1 Input Voltage of Signal Vin -0.3 4 [Volt] Note 1 Operating Temperature TOP 0 +50 [oC] Note 2 Operating Humi dity HOP 10 90 [%RH] Note 2 Storage Temperature TST -20 +60 [oC] Note 2 Storage Humidity HST 10 90 [%RH] Note 2 Panel Surfac e Tem per ature PST 65 [oC] Note 3

Note 1: Duration: 50 msec. Note 2 : Maximum Wet-Bulb should be 39 and No condensation.к The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures к greater than 40 , the wet bulb temperature must not exc eed 39 .кк Note 3: Surface t em per ature is measured at 50к Dry condition

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

3. Electrical Specification

The T460HVN02.0 r equir es two power i nputs. O ne is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The other is to power back light unit.

3.1 Electrical Characteristics

Rev. 00

3.1.1: DC Characteristics

Value

Parameter Symbol

Unit Note

Min. Typ. Max LCD Power Supply Input Voltage VDD 10.8 12 13.2 VDC Power Supply Input Cur r ent IDD -- 0.50 0.55 A 1 Power Consumption PC -- 6 7.26 Watt 1 Inrush Current I Permissibl e Ripple of Power Supply Input Voltage VRP -- -- V

Input Differenti al Voltage

LVDS Interface

Differential I nput High Threshol d Voltage VTH +100 -- +300 mVDC 4

Differential Input Low Threshold Voltage VTL -300 -- -100 mVDC 4 Input Common Mode Voltage V

CMOS Interface

Input High Threshold V oltage

Input Low Threshold Voltage

-- -- 5 A 2

RUSH

DD

* 5% mV

Ю

ЮV

ID

ICM

V

IH

(High)

V

IL

(Low)

200 400 600 mV

1.1 1.25 1.4 VDC 4

2.7 -- 3.3 V

0 -- 0.6 V

pk-pk

DC

5

DC

5

DC

3

4

LED lightbar and LED Backlight structure are designed by customers, AUO could not guarantee life time

and backlight power consumption.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

s

3.1.2: AC Characteristics

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev. 00

Parameter Symbol

Receiver Clock : Spread Spectrum

Modulation range ʳ LVDS Interface

Receiver Clock : Spread Spectrum

Modulation frequencyʳ

Receiver Data Input Mar gin

Fclk = 85 MHz

Fclk = 65 MHzʳ

Note :

1. V

= 12.0V, Fv = 60Hz, Fclk= 82M Hz , 25 , Test к P attern : White Pattern

DD

2. Measurement c ondition : Rising time = 400us

GND

10%

Value

Unit Note

Min. Typ. Max

Fclk_ssʳ

Fclk

-3%ʳ

--ʳ

Fclk

+3%ʳ

MHzʳ 6

Fssʳ 30ʳ --ʳ 200ʳ KHzʳ 6

tRMGʳ -0.4

-0.5ʳ

V

90%

DD

--ʳ

0.4

0.5ʳ

nsʳ 7

μ

400

3. Test Condition: (1) The measure point of VRP is in LCM side after connecting the Sy stem Board and LCM. (2) Under Max. Input current spec. condition.

4. V

= 1.25V

ICM

LVDS -

V

ICM

V V

LVDS +

GND

|VID|

0V

TH

TL

|VID|

5. The measure points of V

and V

IH

are in LCM side after connecting the System Board and LCM.

IL

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. LVDS Receiver Cl ock SS CG (Spread spectrum clock generator ) is defined as below figures

Fclk_ss(max)

Fclk

Fclk_ss(min)

www.panelook.com

T460HVN02.0 SKD Product Specification

1/F

SS

Rev. 00

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. Receiver Data Input Margin

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev. 00

Parameter Symbol

Min Type Max

Rating

Unit Note

tRIP2

tRIP3

tRIP4

tRIP5

LVDS-Rx Input Data

LVDS-Rx Input Cl ock

tRIP6

tRIP0

tRIP1

Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Rx2Rx3

V

= 0V

dif f

1/Fcl k=T

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

3.2 Interface Connections

LCD connector: FI- RE 51S - HF ( JAE, LVDS connector)

PIN Symbol Description PIN Symbol Description

Rev.0 0

P ower Supply, +12V DC Regulated

1 2 3 4 5 6 7 8 9

10

11 12 13 14 15 16

V

DD

P ower Supply, +12V DC Regulated

V

DD

P ower Supply, +12V DC Regulated

V

DD

P ower Supply, +12V DC Regulated

V

DD

P ower Supply, +12V DC Regulated

V

DD

N.C. No connection GND Ground GND Ground GND Ground

CH1_0- LVDS Channel 1, Signal 0-

CH1_0+ LVDS Channel 1, Signal 0+

CH1_1- LVDS Channel 1, Signal 1-

CH1_1+ LVDS Channel 1, Signal 1+

CH1_2- LVDS Channel 1, Signal 2-

CH1_2+ LVDS Channel 1, Signal 2+

GND Ground

CH2_0+ LVDS Channel 2, Signal 0+

26

CH2_1- LVDS Channel 2, Signal 1-

27

CH2_1+ LVDS Channel 2, Signal 1+

28

CH2_2- LVDS Channel 2, Signal 2-

29

CH2_2+ LVDS Channel 2, Signal 2+

30 31 32 33 34 35 36 37 38 39

40 41

GND Ground

CH2_CLK- LVDS Channel 2, Clock -

CH2_CLK+ LVDS Channel 2, Clock +

GND Ground

CH2_3- LVDS Channel 2, Signal 3-

CH2_3+ LVDS Channel 2, Signal 3+

CH2_4- LVDS Channel 2, Signal 4-

CH2_4+ LVDS Channel 2, Signal 4+

GND Ground

SCL EEPROM Serial Clock N.C. AUO Internal Use Only

CH1_CLK- LVDS Channel 1, Clock -

17

42

N.C. AUO Internal Use Only

EEPROM Write Protection

CH1_CLK+ LVDS Channel 1, Clock +

18

43

WP

High(3.3V) for Writable,

Low(GND) for Prot ection

19 20

GND Ground

CH1_3- LVDS Channel 1, Signal 3-

44 45

21 CH1_3+ LVDS Channel 1, Signal 3+ 46

CH1_4- LVDS Channel 1, Signal 4-

22

CH1_4+ LVDS Channel 1, Signal 4+

23 24 25

GND Ground

CH2_0- LVDS Channel 2, Signal 0-

47 48 49 50 51

SDA EEPROM Serial Data

LVDS_SEL

High(3.3V) for NS,

Open/Low(GND) for JEIDA

N.C. AUO Internal Use Only N.C. No connection N.C. No connection N.C. No connection N.C. No connection

N.C. No connection

Note: N.C. : please leave this pin unoccupied. It can not be connected by any signal (Low/GND/High).

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

LVDS Option = High NS

Previous C ycle Cu rren t Cycle Next C ycle

Clock

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

CHx_0+ CHx_0-

CHx_1+ CHx_1-

CHx_2+ CHx_2-

CHx_3+ CHx_3-

CHx_4+ CHx_4-

Note: x = 1, 2, 3, 4…

LVDS Option = Low/Open JEIDA

R0R5 G0G0R0R1 R2R3R4 R1

G1B0 B1B1G1G2 G3G4G5 G2

B2NA DEDEB2B3 B4B5NA B3

R6B7 NANAR6R7 G6G7B6 R7

R8B9 NANAR8R9 G8G9B8 R9

Clock

CHx_0+ CHx_0-

CHx_1+ CHx_1-

CHx_2+ CHx_2-

CHx_3+ CHx_3-

CHx_4+ CHx_4-

P revious Cycle Curren t Cycle N e xt Cycle

R4R9 G4G4R4R5 R6R7R8 R5

G7

G5B4 B5B5G5G6 G7G8G9 G6

B6NA DEDEB6B7 B8B9NA B7

R2B3 NANAR2R3 G2G3B2 R3

R0B1 NANAR0R1 G0G1B0 R1

Note: x = 1, 2, 3, 4…

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

3.3 Signal Timing Specification

This is the signal timing required at the input of the user connector. All of the interface signal timing should be satisfied wit h the following specifications for its proper operation.

Timing Table (DE only Mode)

Signal Item Symbol Min. Typ. Max Unit

Rev.0 0

Period Tv

Vertical Section

Horizontal Section

Clock Frequency Fclk=1/Tclk Vertical Frequency Frequency Fv Horizontal Frequency Frequency Fh

Notes: (1) Display position is specific by the rise of DE signal only.

Horizontal display position is specified by the rising edge of 1 left edge of the screen.

(2)Vertical display positi on is specified by the rise of DE after a “Low” lev el peri od equivalent to eight times of

horizontal period. The 1

st

Active Tdisp (v)

Blanking Tblk (v)

Period Th

Active Tdisp (h)

Blanking Tblk (h)

data corresponding to one horizontal line after the rise of 1st DE is displayed at the top

1096 1125 1480

1080

16 45 400

1030 1100 1325

960 70 140 365 50 74.25 82

47 60 63 60 67.5 73

st

DCLK after the rise of 1st DE, is displayed on the

Th

Tclk

MHz

Hz

KHz

line of screen. (3)If a period of DE “Hi gh” is less than 1920 DCLK or l es s than 1080 lines, the rest of the screen displays bl ac k. (4)The displ ay posi tion does not fit to the screen if a period of DE “High” and the effectiv e data peri od do not

synchronize with eac h other.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

M pixel

Tv

Tdisp(v)Tblk(v)

N Line

Th

Line

Pixel

Invalid Da ta

3

1

Pixel

Invalid Da ta

4

2

www.panelook.com

N

Pixel

M-1

M-3

M-5

Pixel

M

M-2

M-4

4

11

Pixel

9

3

Th

Tdisp(h) Tblk(h)

2

1

Pix el

Pixel

7

5

3

1

Pixel

Pix el

Pixel

12

10

8

6

4

2

Global LCD Panel Exchange Center

Rev.0 0

DE

Invalid Data Inval id Data

N

Line

RGB

Data

CLK

T460HVN02.0 SKD Product Specification

Tclk

DE

Invalid Data

Pix el

Pixel

Invalid Data

M-1

M-3

M-5

M-7

CH1

Pix el

Pixel

M

M-2

M-4

M-6

CH2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

3.4 Signal Timing Waveforms

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

3.5 Color Input Data Reference

The brightness of each primary color (red, green and blue) is based on the 10 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.

COLOR DATA REFERENCE

Input Color Data

Rev.0 0

Color

Black 000000000000000000000000000000 Red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0

Basic

Blue(1023) 000000000000000000001111111111

Colorʳ

Cyan 000000000011111111111111111111

ʳ

Magenta 111111111100000000001111111111

ʳ

Yellow 111111111111111111110000000000 White 111111111111111111111111111111 RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(001) 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Rʳ

---- ʳʳʳʳʳʳ ʳ ʳ ʳ ʳ ʳ ʳ RED(1022) 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

MSB LSB

R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0

RED

MSB LSB

GREEN

BLUE

MSB LSB

GREEN(000)000000000000000000000000000000 GREEN(001)000000000000000000010000000000

Gʳ

---- ʳʳʳʳʳʳ ʳ ʳ ʳ ʳ ʳ ʳ GREEN(1022)000000000011111111100000000000 GREEN(1023)000000000011111111110000000000 BLUE(000) 000000000000000000000000000000 BLUE(001) 000000000000000000000000000001

Bʳ

---- ʳʳʳʳʳʳ ʳ ʳ ʳ ʳ ʳ ʳ BLUE(1022) 000000000000000000001111111110 BLUE(1023) 000000000000000000001111111111

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3.6 Power Sequence for LCD

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

Power Supply For LCD VDD (+12V)

Interface Signal (LVDS Data & CLK)

Backlight on/o ff control signal (VBLON)

CMOS Interface Signal

(LVDS_SEL,....... )

EDID Read / Write (WP pin)

GND

Parameter

10%

90%

t1

t2

Valid Data

t3 t4

t8 t9

t10

Values

Min. Type. Max.

t11

90%

10%

t6

t5

10%

t7

Unit

t1 0.4ʳ ---ʳ 30ʳ ms t2 0.1ʳ ---ʳ 50ʳʳʳʳ ms t3 450ʳʳʳʳ ---ʳ ---ʳ ms t4 0*1ʳ ---ʳ ---ʳ ms t5 0ʳ ---ʳ ---ʳ ms t6 ---ʳ ---ʳ ---*2ʳ ms t7 500ʳ ---ʳ ---ʳ ms

t8ʳ

10

*4

ʳ

---ʳ 50ʳ msʳ

t9ʳ 0ʳ ---ʳ ---ʳ msʳ

t10 450ʳʳʳʳ ---ʳ ---ʳ ms t11 150

*3

ʳ

ʳ ---ʳ ---ʳ ms

ʳʳ

Note: (1) t4=0 : concern for resi dual pattern before BLU turn off. (2) t6 : voltage of VDD must decay smoothly aft er power- off . (c ustomer system decide this value) (3) t11: the min value is decided by the download finish time of EDID 2K bits.(when SCL over 30KHz) (4) When CMOS Interface signal is N.C. (no connection), opened in Transmitted end, t8 timi ng spec can be

negligible.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

T460HVN02.0 SKD Product Specification

4. Optical Specification

Optical charac teristics are determ ined after the unit has been ‘ON ’ and stable for approximately 45 minutes in a dark environm ent at 25°C. The values specified are at an approxim ate distance 50cm from the LCD surface at a viewing angle of φ and θ equal t o 0°.

Fig.1 presents additional information concerning the measurement equipment and method.

SR3 or equi val ent

Rev.0 0

Parameter Sy mbol Condition

Unit Notes

Min. Typ. Max Contrast Ratio CR -- 5000 -- 1 Surface Luminance

Values

(White)

L

WH

-- 330 -- cd/m2 2

*

Luminance Variation δ

WHITE(9P)

-- -- 1.33 3 Resp on se Time (G to G) Tγ -- 6.5 -- Ms 4 Center Transmittance T%

6.2 % 7

Color Chromatici ty 5

Red R

R

Green G

G

Blue B

B

White W

X

Y

X

Y

X

Y

X

With CS-1000T

Standard light sourc e “ C”

Typ.-0.03

0.669

0.323

0.300

0.605 Typ.+0.03

0.138

0.082

0.325

W

Y

0.369

Viewing Angle 6

x axis, right ( φ=0°) θ x axis, left(φ=180°) θ y axis, up(φ=90°) θ y axis, down (φ=270°) θ

r

l

u

d

With AUO Module

-- 89 -- degree

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3

www.panelook.com

T460HVN02.0 SKD Product Specification

1. Li ght source here is the BLU of AUO T460HVN02 V3 module.

*

The typical values of contrast ratio, surface luminance, luminance variation, and color chromaticity are

based on the average value of DVT samples with T460HVN02.3 backlight.

*

T460HVN02.3 LED lightbar and LED backlight structure are designed by customers, AUO can not

guarantee the typical value of NTSC, RGBW, contrast ratio, luminance, and maximum value of luminance

variation.

2. Contr ast Ratio (CR) is defined mathemati c ally as:

Surface Luminance of

Contrast Ratio=

Surface Luminance of

3. Surface lumi nance is luminanc e value at point 5 across the LCD surface 50cm from the surface with all pix els

L

on5

L

off5

Rev.0 0

displaying white. For more information see FIG 2. L

=Lon5 where Lon5 is the luminance with all pixels

WH

displaying white at center 5 location.

FIG. 2 Luminance

V

H/2

H/6

1

7

2

4. The v ari ation in surface luminance, δWHITE is defined ( c enter of Screen) as:

δ

WHITE(9P)

5. Response time T

= Maximum(L

γ

is the average time required for display transition by switching the input signal for five

on1

, L

on2

,…,L

)/ Mi ni mum( L

on9

on1

, L

on2

,…L

on9

)

H

V/2 V/6

luminance ratio (0%,25%,50%,75%,100% brightness matr ix) and is based on F

=60Hz to optimize.

v

Target Measured

Response Time

0%

25%

Start

50%

75%

100%

The response tim e is defined as the following figure and shall be measured by switchi ng the input signal for “any level of grey( bri ght) “ and “any level of gray(dark)”.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

0% 25% 50% 75% 100%

0% to 25% 0% to 50% 0% to 75% 0% to 100% 25% to 0% 25% to 50% 25% to 75% 25% to 100% 50% to 0% 50% to 25% 50% to 75% 50% to 100% 75% to 0% 75% to 25% 75% to 50% 75% to 100%

100% to 0% 100% to 25% 100% to 50% 100% to 75%

www.panelook.com

Global LCD Panel Exchange Center

FIG.3 Response Time

Any level of gray (Bright) Any level of gray (Dark) Any level of gray (Bright)

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

0%, 25%, 50%, 75%, 100%

Photodetector

Output

0%, 25%, 50%, 75%, 100%

Time

T

ӫӫӫӫ

(F)

6. Viewing angle is the angle at which the contrast rati o is greater than 10. The angles are determined f or the horizontal or x axis and the vertical or y axis with respec t to the z axis which is normal to t he LCD surface. For more informati on see FIG 4.

FIG.4 Viewing Angle

T

ӫӫӫӫ

(R)

7. Definition of Transmittance (T%):

module LCD of Luminance

nceTransmitta ∗=

%001

backlight of Luminance

During transmit tance m easurement, the backlight of LCD module contains no brightness enhancement film. Two diffuser sheets which diffuse the light source uniformly are suggested to use for transmittance measurement.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. Open Cell Drawing

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

6. Reliability Test Items (Reference Only)

Test Item Q’ty Condition

1 High temperature storage test 3 60к, 300hr s 2 Low temperature storage test 3 -20к, 300hrs 3 High temperature operation test 3 50к, 300hrs 4 Low temperature operation test 3 -5к, 300hrs

T460HVN02.0 SKD Product Specification

Rev.0 0

5 Vibr ation test (With carton) 1(PK G)

6 Drop test (With carton) 1(PKG)

Note: Test item 1~4Test item 1~4 RA tests are done on AUO T460HVN02.0 panels.

Random wave (1.5G RMS, 10-200Hz) 30mins/ Per each X,Y,Z axes

Drop Height: 15.2 cm, 6 Flats (FrontШRearШLeftШRightШTopШBottom) (ASTMD4169-I)

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. Packing

7-1 DEFINITION OF LABEL:

A. Open cell shipping Label:

(1) (2) (3)

(1)

AUO internal code

www.panelook.com

T460HVN02.0 SKD Product Specification

΅΅΅΅

͹·Ϳ

͹·Ϳ



͹·Ϳ͹·Ϳ

Rev.0 0

(2)

Manufactured date

(3)

Model name

B. Carton Label:

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7-2 PACKING METHODS:

EPE Spacer

Open Cell

Hybrid Box

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

1Box for 12 pcs cells & 13 pcs spacers

12 Pcs/Box,

EPP Top Cover

Pallet Dimension:1200*1000*145 mm

8 Boxes/Pallet, after stack 8 boxes, then put EPP top cover on it.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7-3 Pallet and Shipment Information

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

ʳ

Item 1 Packing Carton 12 pcs/carton 1185(L)mm *815(W)mm*240(H)mm 28 ʳ 2 Pallet 1 1185(L)mm*860(W)mm*132(H)mm 13 ʳ 3 Carton per P allet 8 boxes/P allet (By Air) ; 3 Boxes/Pallet* Double Pall et (By Sea) ʳ

4 Cell per P allet 96 pc s/pallet(By Air) ; 96 pcs/Pallet* Double Pallet (By Sea) ʳ

after packing

Qty. Dimension Weight (kg)

96pcs (by Air) 1185(L)mm *860(W)mm*852(H)mm (by Air) 239(by Air) ʳ5 Pallet 192pcs (by Sea) 1185(L)mm*860(W)mm*1704(H)mm (by Sea) 478 (by Sea) 40ftDC

Specification

Packing Remark

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PRECAUTIONS

Please pay attenti on to the followings when you use this TFT LCD module.

8-1 MOUNTING PRECAUTIONS

(1) You must mount a module using holes arranged in four corners or four sides. (2) You should c onsi der the mounting structur e so that uneven forc e ( ex. twisted stress) is not applied

to module. And the case on which a module is mounted should have sufficient strength so that external f orce is not transmitted directly to the modul e.

(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.

Transparent protectiv e plate should have sufficient strength in order to the resist ex ternal force.

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

(4) You should adopt radiation structur e to satisfy the temperature specificati on. (5) Acetic aci d type and chlorine type materials for the cover case are not desi rable because the form er

generates corrosiv e gas of attacking the polar izer at high temperat ure and the latter cause ci rcuit broken by electro- c hem ic al r eac tion.

(6) Do not touch, push or rub the exposed pol arizer with glass, tweezers or anything har der than HB

pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.)

(7) When the surface becom es dusty, please wipe gently wit h absorbent cot ton or other soft materi als

like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach front/ rear pol arizer. Do not use acetone, toluene and alcohol because they cause chemic al dam age to the polarizer.

(8) Wipe off saliv a or water drops as soon as possible. Thei r long time contact with polari zer causes

deformations and color fading.

(9) Do not open the case because insi de c ircuits do not have sufficient strength.

8-2 OPERATING PRECAUTIONS

(1) The device listed in the product specification sheets was designed and manufactured for TV

application

(2) The spike noise causes the mis-operation of circuits. It should be lower than following voltage:

V=±200mV(Over and under shoot v oltage) (3) Response time depends on the temper ature. (In lower temperature, it becomes longer..) (4) Bri ght ness of CCFL depends on the tem per ature. (I n lower temperat ure, it becom es lower.) And in

lower temperatur e, response tim e (requi red time that bright ness is stable after tur ned on) becomes

longer. (5) Be careful for condensation at sudden temperature change. Condensation makes damage to

polarizer or elec trical contacted parts. And after f ading conden sation, smear or spot will occur. (6) When fixed patterns are displayed for a long time, remnant image is likely to occur. (7) Module has high frequency ci r c uits. S uff ici ent suppression to the elect r om agnetic interference shall

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

be done by system manufacturers. Grounding and shielding methods may be important to minimize

the interfac e.

8-3 ELECTROSTATIC DISCHARGE CONTROL

Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connect ed to ground through wristband etc. And don’t touch interface pin directly.

8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

Strong light exposure causes degradation of polarizer and color filter.

8-5 STORAGE

www.panelook.com

T460HVN02.0 SKD Product Specification

Rev.0 0

When storing modules as spares f or a long time, the following precautions are necessary.

(1) Store them in a dark plac e. Do not expose the m odule to sunlight or fluorescent li ght. Keep the

temperature between 5 and 35 at normal humidity.кк (2) The polarizer surface should not come in contact with any other object. It is recommended that they

be stored in the container in whic h they were shipped.

8-6 HANDLING PRECAUTIONS FOR PROTECTION FILM

(1) The prot ection film i s attached to the bez el with a sm all masking tape. W hen the protecti on film is

peeled off, static electric ity is generated between the film and polari zer. Thi s should be peeled off

slowly and carefull y by people who are electrically grounded and with well ion-blown equipm ent or

in such a condition, et c. (2) When the module with protection film attached is stored for a long time, sometimes there remains a

very small amount of glue still on the bezel after the protection film is peel ed off. (3) You can remove the glue easily. W hen the glue remains on the bezel or its vestige is recognized,

please wipe them off with absorbent cotton waste or other soft mat erial like chamois soaked wit h

normal-hexane.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com