AUO T400HW01 V5 Specification
Global LCD Panel Exchange Center
www.panelook.com
7/25/2008©Copyright AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
0/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Document Version: 1.0
Date:2008/7/16
Product Specifications
40” Full HD Color TFT-LCD Module
Model Name: T400HW01 V5
() Preliminary Specifications
(*) Final Specifications
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 1/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
No
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
www.panelook.com
Contents
3-3 SIGNAL TIMING SPECIFICATION
3-4 SIGNAL TIMING WAVEFORM
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE
3-7 BACK LIGHT POWER SPECIFICATION
4 OPTICAL SPECIFICATION
5 MECHANICAL CHARACTERISTICS
6 RELIABILITY TEST ITEMS
7 INTERNATIONAL STANDARD
8 PACKING
9 PRECAUTION
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 2/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Record of Revision
Version Data Description Remark
0.0 2008/06/20 Frst release N/A
1.0 2008/7/16 Update section 2 figure
www.panelook.com
Update section 3-1, electrical spec
Update section 3-3, timing table
Update section 3-6, power sequence table
Update section 3-7-2, figure
Update section 3-7-3 spec
Update section 4, optical data
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 3/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. General Description
This specification applies to the 40.0 inch Color TFT-LCD Module T400HW01 V5. This LCD
module has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 40.0
inch. This module supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue
sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel
color is determined with a 8-bit gray scale signal for each dot.
The T400HW01 V5 has been designed to apply the 8-bit 2 channel LVDS interface method. It is
intended to support displays where high brightness, wide viewing angl e, high color saturation, and
high color depth are very important.
* General Information
Items Specification Unit Note
Active Screen Size 40.00 inch
Display Area 885.6(H) x 498.15(V) mm
Outline Dimension 952.0(H) x 551.0 (V) x 53.2(D) mm With Balance board
Driver Element a-Si TFT active matrix
Display Colors 8 bit, 16.7M Colors
Number of Pixels
Pixel Pitch 0.46125 (H) x 0.46125(W) mm
Color Gamut 72 % NTSC
Pixel Arrangement RGB vertical stripe
Display Operation Mode Normally Black
Surface Treatment
www.panelook.com
1,920x1,080 Pixel
Anti-Glare,
Hard-Coating(3H),Haze=11%
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 4/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the
unit
Item Symbol Min. Max Unit Note
Logic/LCD Drive Voltage V
Input Voltage of Signal Vin -0.3 3.6 V
Operating Temperature TOP 0 +50 °C2
Operating Humidity HOP 10 90 %RH 2
Storage Temperature TST -20 +60 °C2
Storage Humidity HST 10 90 %RH 2
Shock (non-operation) ±x, ±y-- 50 G 3
Shock (non-operation) ±z--50 G 3
Vibration (non-operation) -- 1.5 G 4
Note 1: Duration = 50ms
www.panelook.com
DD
-0.3 14.0 V
DC
DC
1
1
Note 2: Maximum Wet-Bulb should be 39°C and No condensation.
Note 3: Sine wave, 11ms, direction: ±x, ±y, ±z (one time each direction)
Note 4: Wave form: random, vibration level: 1.5G RMS, Bandwidth: 10--300Hz
Duration: X, Y, Z 30min (one time each direction)
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 5/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3. Electrical Specification
The T400HW01 V5 requires two power inputs. One is employed to power the LCD electronics and to
drive the TFT array and liquid crystal. The second input, which powers the CCFL, is typically
generated by an integrate power (I/P) system.
3.1 Electrical Characteristics
Parameter Symbol
Power Supply Input Voltage V
Power Supply Input Current I
Power Consumption P
Inrush Current I
Differential Input
High Threshold
Voltage
LVDS
Interface
CMOS
Interface
Backlight Power Consumption P
Life Time 50000 60000 -- Hours 3
Differential Input
Low Threshold
Voltage
Input Common
Mode Voltage
Input High
Threshold Voltage
Input Low
Threshold Voltage
www.panelook.com
Min. Typ. Max
DD
DD
C
RUSH
V
TH
V
TL
V
ICM
V
IH
(High)
V
IL
(Low)
BL
10.8 12 13.2 V
-- 1.14 1.25 A 1
-- 13.68 15.0 Watt 1
-- -- 4.5 A 5
-- -- +100 mV
-100 -- -- mV
0.6 1.2 1.8 V
2.4 -- 3.3 V
0 -- 0.7 V
160 170 180 Watt 2
Val ue
Unit Note
DC
DC
DC
DC
DC
DC
4
4
The performance of the Lamp in LCD panel, for example life time or brightness, is extremely
influenced by the characteristics of the balance board and I/P board. All the parameters should be
carefully designed as not to produce too much leakage current from high-voltage output. While
design or order balance board, please make sure unwanted lighting caused by the mismatch of
the lamp and balance board (no lighting, flicker, etc) never occurs. After confirmation, the LCD
Panel should be operated in the same condition as installed in your instrument.
Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting
tape, TFT-LCD Module has a low luminance and the inverter has abnormal action, because
leakage current occurs between lamp wire and conducting tape.
The relative humidity must not exceed 80% non-condensing at temperatures of 40 °C or less. At
temperatures greater than 40°C the wet bulb temperature must not exceed 39°C. When operate
at low temperatures, the brightness of CCFL will drop and the lifetime of CCFL will be reduced.
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 6/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
s
μ
Note:
1. V
2. The power consumption shown above is tested by lamp current I
3. The life is determined as the time at which luminance of the lamp is 50% compared to that of
4. V
=12.0V, fV=60Hz, fCLK=81.5Mhz, 25°C, VDDduration time=400µs, test pattern: white pattern
DD
initial value at the typical lamp current on condition of continuous operating at 25 ±2°C.
=1.2V
ICM
www.panelook.com
VTH
V
VCIM
ICM
VTL
0V
Figure: LVDS Differential Voltage
=11mA and used by IP JIG.
L
5. Measurement condition: rising time=400µs
GND
0.1 Vdd
400
0.9 Vdd
Vdd
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 7/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3.2 Interface Connections
LCD connector: FI-RE51S-HF (JAE)
Mating connector: FI-RE51S-HL (JAE)
PIN # Signal Name Description
1 V
2 V
3 V
4 V
5 V
6 GND Ground
7 GND Ground
8
9 GND Ground
10 RO_0- Negative(-) LVDS differential data input
11 RO_0+ Positive(+) LVDS differential data input
12 RO_1- Negative(-) LVDS differential data input
13 RO_1+ Positive(+) LVDS differential data input
14 RO_2- Negative(-) LVDS differential data input
15 RO_2+ Positive(+) LVDS differential data input
16 GND Ground
17 RO_CLK- Clock Signal(-)
18 RO_CLK+ Clock Signal(+)
19 GND Ground
20 RO_3- Negative(-) LVDS differential data input
21 RO_3+ Positive(+) LVDS differential data input
22 NC No connection
23 NC No connection
24 GND Ground
25 RE_0- Negative(-) LVDS differential data input
26
DD
DD
DD
DD
DD
GND
RE_0+
www.panelook.com
12V power supply
12V power supply
12V power supply
12V power supply
12V power supply
Ground
Positive(+) LVDS differential data input
©Copyrig ht AU Optronics Corp.
2007 All Rights Reserved. T400HW01 V5 ver1.0 8/28
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...