AUO T260XW03 V0 Specification

Global LCD Panel Exchange Center

Product Description: T260XW03 TFT-LCD PANEL with RoHS Guarantee

AUO Model Name: T260XW03 V0

Customer Part No/Project Name:

www.panelook.com

Customer Signature Date AUO 2007/01/23

Approved By: PL Chen

Reviewed By: Tzu Chieh Lai

Prepared By: Jerry Lee

Document Version : 0.6

Date : 2007/01/23

©Copyright AU Optronics, Inc.
January 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 1/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Product Specifications

26” WXGA Color TFT-LCD Module

Model Name: T260XW03 V0

( ) Preliminary Specifications

(*) Final Specifications

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 2/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

COVER

CONTENTS

RECORD OF REVISIONS

GENERAL DESCRIPTION1

www.panelook.com

Contents

ITEMNo

ABSOLUTE MA XIMUM RATINGS2

ELECTRICAL SPECIFICATIONS3

ELECTRICAL CHARACTREISTICS 3-1

INTERFACE CONNECTIONS3-2

SIGNAL TIMING SPECIFICATIONS3-3

SIGNAL TIMING WAVEFORMS3-4

COLOR INPUT DATA REFERNECE3-5

POWER SEQUENCE3-6

OPTICAL SFECIFICATIONS4

MECHANICAL CHARACTERISTICS5

6

7

RELIABILITY

INTERNATIONAL STANDARDS

7-1

SAFETY

EMC

7-2

PACKING (Green Mark Description)8

PRECAUTIONS9

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 3/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Version Date No Old Description New Description Remark

06’/09/18 - - First Draft

0.1 06/09/26 22,23 2D drawing Updated clear drawing

26,27 Packing: 4ps panels per carton

0.3 06/10/13 8 Inrush current Update from 1.2mA to 3mA

13 Timing table

06/10/13 25 Shock test 50G 11ms20ms

06/10/30 16,17 Sequence Updated

0.4 06/11/07 7 VBLON, PDIM Change from 6 to 5.25V

8 Power Supply Input Current

10 LVDS Transmitter

12 Inrush Current Change from 5 to 6 ADC

0.5 06/11/27 All Spec format updated

0.6 07/01/23 7 Power Consumption Updated max. value

11 Input current Updated min. and max. value

www.panelook.com

Record of Revision

1. 5ps panels per carton,

2. New carton and new pallet
design.

Align the timing spec with other
model which using the same
ASIC.

1G RMS; 10-500Hz X,Y,Z 20min

Vibration test

Symbol Update form VDIM to PDIM

Default value of VBLON Change from on to off

Backlight Power Consumption Updated max. value

Input Power Updated max. value

1.5G RMS;10-300Hz X,Y,Z
30min

Max value change from 760 to
800mA
Change from DS90C385(NS) to
SN75LVDS83(TI)

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 4/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. General Description

This specification applies to the 26.0 inch Color TFT-LCD Module T260XW03 V0.
This LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels,
and diagonal size of 26.0 inch. This module supports 1366x768 XGA-WIDE mode
(Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged
in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined
with a 8-bit (6bit+FRC) gray scale signal for each dot.
The T260XW03 V0 has been designed to apply the 8-bit 1 channel LVDS interface
method. It is intended to support displays where high brightness, wide viewing angle,
high color saturation, and high color depth are very important.
The T260XW03 V0 model is RoHS verified, which can be distinguished on panel
label.

www.panelook.com

* General Information

Items Specification Unit Note
Active Screen Size 26.0 inches
Display Area 575.769 (H) x 323.712(V) mm
Outline Dimension 626.0(H) x 373.0(V) x 42.16(D) mm With inverter
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1366 x 768 Pixel
Pixel Pitch 0.4215 mm

Pixel Arrangement RGB vertical stripe
Display Mode Normally White
Surface Treatment AG, 3H Haze= 25

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 5/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2. Absolute Maximum Ratings

The following are maximum values which, if exceeded, may cause permanent
damage to the unit.

Item Symbol Min Max Unit Conditions

Logic/LCD Drive Voltage Vcc -0.3 6 [Volt] Note 1

Input Voltage of Signal Vin -0.3 3.6 [Volt] Note 1

BLU Input Voltage VDDB 21.6 26.4 [Volt] Note 1

BLU Brightness Control Voltage VBLON 0 5.25 [Volt] Note 1

Internal PWM Dimming Control

Voltage

Operating Temperature TOP 0 +50 [oC] Note 2

Operating Humidity HOP 10 90 [%RH] Note 2

Storage Temperature TST -20 +60 [oC] Note 2

Storage Humidity HST 10 90 [%RH] Note 2

www.panelook.com

PDIM 0 5.25 [Volt] Note 1

Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40  or less. At
temperatures greater than 40, the wet bulb temperature must not exceed 39 .

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 6/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

T

3. Electrical Specifications

The T260XW03 V0 requires two power inputs. One is employed to power the LCD
electronics and to drive the TFT array and liquid crystal. The second input power for
the BLU, is to power inverter..

3-1 Electrical Characteristics

LCD:

Power Supply Input Voltage Vcc 4.5 5 5.5 Vdc 1

Power Supply Input Current Icc 0.63 0.8 A 2

Power Consumption Pc - 3.15 4 Watt 2

Inrush Current I

Differential Input High

hreshold Voltage
LVDS
Interface

CMOS

Interface

Backlight Power Consumption PDDB 64.8 72 Watt 8

Total Power Consumption 67.95

Life Time 50,000 60,000 Hours 9

Differential Input Low
Threshold Voltage
Common Input
Voltage

Input High Threshold
Voltage
Input Low Threshold
Voltage

www.panelook.com

Parameter Values Unit Notes

Min Typ Max

RUSH

VTH

VTL

VICM

VIH
(High)
VIL
(Low)

- - 3 Apeak 3
100

mV

-100

1.10 1.25 1.40

2.4 3.3 5.5

0 0.7

mV

V

Vdc

Vdc

4

4

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 7/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note :

1. The ripple voltage should be controlled under 10% of V

2. Vcc= 5.0V, =

f 62Hz, fCLK=85Mhz , 25, Test Pattern : White Pattern

www.panelook.com

CC

v

3. Measurement condition :

90%

10%

GND

Trush= 470 uS

VCC

4. VCIM = 1.2V

VTH

VCIM

VTL

0V

5. The performance of the Lamp in LCM, for example life time or brightness, is extremely

influenced by the characteristics of the DC-AC Inverter. So all the parameters of an inverter
should be carefully designed so as not to produce too much leakage current from high-voltage
output of the inverter. When you design or order the inverter, please make sure unwanted
lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never
occurs. When you confirm it, the LCD Assembly should be operated in the same condition as
installed in your instrument.

6. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting

tape, TFT-LCD Module have a low luminance and the inverter has abnormal action because
leakage current occurs between lamp wire and conducting tape.

7. The relative humidity must not exceed 80% non-condensing at temperatures of 40  or less.
At temperatures greater than 40, the wet bulb temperature must not exceed 39 .When
operate at low temperatures, the brightness of CCFL will drop and the life time of CCFL will be
reduced.

8. The measured data is without boost function

9. Lifetime is defined and judged when analog and PWM dimming are maximum values

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 8/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3-2 Interface Connections

LCD Panel Driving Signal Connector Type and Pin Assignment are as follows:
Connector on Panel: FI-E30S (Manufactured by JAE) or Equivalent
Mating connector: FI-30C2L (Manufactured by JAE) or Equivalent

Pin No Symbol Description Note

1

2

3

4 GND Ground
5 Rx0- LVDS Channel 0 [Polarity: Negative]

6 Rx0+ LVDS Channel 0 [Polarity: Positive]
7 GND Ground

8 Rx1- LVDS Channel 1 [Polarity: Negative]
9 Rx1+ LVDS Channel 1 [Polarity: Positive]

10 GND Ground

11 Rx2- LVDS Channel 2 [Polarity: Negative]
12 Rx2+ LVDS Channel 2 [Polarity: Positive]

13 GND Ground
14 RXCLK- LVDS Clock [Polarity: Negative]
15 RXCLK+ LVDS Clock [Polarity: Positive]

16 GND Ground
17 Rx3- LVDS Channel 3 [Polarity: Negative]

18 Rx3+ LVDS Channel 3 [Polarity: Positive]
19 GND Ground
20

21 LVDS Option* Low for JEIDA, High/Open for NS
22

23 GND Ground

24 GND Ground
25 GND Ground

26 Vdd (+5V) 5V, DC, Regulated
27 Vdd (+5V) 5V, DC, Regulated
28 Vdd (+5V) 5V, DC, Regulated

29 Vdd (+5V) 5V, DC, Regulated
30 Vdd (+5V) 5V, DC, Regulated

N.C. No Connection ( Auo internal Test Pin)

N.C. No Connection ( Auo internal Test Pin)

N.C. No Connection ( Auo internal Test Pin)

N.C. No Connection ( Auo internal Test Pin)

N.C. No Connection ( Auo internal Test Pin)

www.panelook.com

Note:

1. All GND (ground) pins should be connected together and should also be connected to the

LCD’s metal frame. All Vcc (power input) pins should be connected together.

2. For Pin 10, 27 and 28, panel will not damage if negligently connect these pins to high or low.

©Copyright AU Optronics, Inc.
January, 2007 All Rights Reserved. T260XW03 V0 - Spec. Ver 0.6 9/30
No Reproduction and Redistribution Allowed

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com