Page 1
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
(V) Preliminary Specification
( ) Final Specification
Module 19.0” SXGA Color TFT-LCD
Model Name
G190EG02 VG
Customer Date
Approved by
Checked &
Approved by
Paul Huang
Prepared by
Date
MFeb. 142, 2012
Note: This Specification is subject to change without
notice.
document version 0.1 1/28
J.M.Chen
Desktop Display Business Group /
AU Optronics corporation
MAFEeb. 12, 2012
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 2
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
Contents
1. Handling Precautions .................................................................................................................. 4
2. General Description..................................................................................................................... 5
2.1 Display Characteristics ........................................................................................................................ 5
2.2 Optical Characteristics......................................................................................................................... 6
3. Functional Block Diagram.........................................................................................................10
4. Absolute Maximum Ratings......................................................................................................11
4.1 TFT LCD Module ............................................................................................................................. 11
4.2 Backlight Unit.................................................................................................................................... 11
4.3 Absolute Ratings of Environment ...................................................................................................... 11
5. Electrical characteristics ..........................................................................................................12
5.1 TFT LCD Module ............................................................................................................................. 12
5.2 Backlight Unit.................................................................................................................................... 15
6. Signal Characteristic .................................................................................................................16
6.1 Pixel Format Image ........................................................................................................................... 16
6.2 The input data format......................................................................................................................... 17
6.3 Signal Description .............................................................................................................................17
6.4 Interface Timing................................................................................................................................. 20
6.5 Power ON/OFF Sequence................................................................................................................. 22
7. Connector & Pin Assignment ...................................................................................................23
7.1 TFT LCD Module ............................................................................................................................. 23
7.2 Connector on Backlight Unit. ............................................................................................................ 24
8. Reliability Test............................................................................................................................25
9. Shipping Label ...........................................................................................................................26
10. Mechanical Characteristic........................................................................................................27
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 2/28
Page 3
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
Record of Revision
Version & Date Page Old Description New Description Remark
0.1 2012/02/22 All Frist Edition for Customer
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 3/28
Page 4
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the
far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Pls avoid touching COF position while you are doing mechanical design
14) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5℃ and 35℃ at normal humidity.
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 4/28
Page 5
2. General Description
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
G190EG02 VG is aColor Active Matrix Liquid Crystal Display composed of a TFT-LC
D panel, a driver circuit,
and a backlight system. The screen format is intended to support the SXGA (1280(H) x 1024(V)) screen and
16.7M colors (RGB 6-bits + HiFRC data). All input signals are 2-channel LVDS interface compatible.
Inverter card of backlight is not included. M190EG02 V9 is designed for a display unit of personal
computer.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 ℃ condition:
Items Unit Specifications
Screen Diagonal [mm] 482.6 (19.0" )
Active Area [mm] 376.32 (H) x 301.06 (V)
Pixels H x V 1280(x3) x 1024
Pixel Pitch [mm] 0.294 (per one triad) x 0.294
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance [cd/m
Contrast Ratio 1000 : 1 (Typ)
Optical ResponseTime [msec] 5 ms(Typ, on/off)
2
] 300 (center, Typical)
Nominal Input Voltage VDD [Volt] +5.0 V
Power Consumption [Watt]
Weight [Grams] 1800 (Typ)
Physical Size (H x V x D) [mm] 396 (H) x 324 (V) x 10.9(D) (Typ)
Electrical Interface Dual channel LVDS
Surface Treatment Hard-coating (3H), Non-Glare treatment
Support Color 16.7M colors (RGB 6-bit + Hi_FRC)
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance RoHS Compliance
TCO Compliance TCO 5.1 Compliance
[oC]
[oC]
16.2 W (Typ)
(PDD= 4.6 W, PLED=11.6 W )
-10 to +55
-20 to +70
document version 0.1 5/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 6
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right)
CR = 10 (Left)
Viewing Angle [degree]
Vertical (Up)
CR = 10 (Down)
Contrast Ratio Normal Direction 600 1000 - 3
Raising Time (TrR)
Optical Response Time [msec]
Color / Chromaticity
Coordinates
(CIE)
Falling Time (TrF)
Rising + Falling - 5 8
Red x 0.609 0.639 0.669
Red y 0.316 0.346 0.376
Green x 0.294 0.324 0.354
Green y 0.597 0.627 0.657
Blue x 0.124 0.154 0.184
75
75
70
70
- 3.6 5.7
- 1.4 2.3
85
85
80
80
-
2
-
4
5
Blue y 0.024 0.054 0.084
White x 0.283 0.313 0.343
White y 0.299
Central Luminance
Luminance Uniformity [%] 9 Points 75 80 - 7
Cross Talk (At 60Hz) [%] - - 1.5 8
Flicker [dB] - - -20
2
[cd/m
] 240 300 - 6
0.329 0.359
9
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 6/28
Page 7
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature
change during measuring (at surface 35). In order to stabilize the luminance, the measurement should be
executed after lighting Backlight for 30 minutes in a stable, windless and dark room.
Photo detector
Measured distance
LCD Panel
Center of the screen
TFT-LCD
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180° horizontal and
180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows;
90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is
typically perpendicular to the display surface with the screen rotated about its center to develop the desired
measurement viewing angle.
document version 0.1 7/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 8
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, T
), and from “Full White” to “Full Black” (falling time, TrF),
rR
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
Optical
Optical
response
response
+ TrF = 5 msec (typ.).
T
rR
100
100
90
10
10
0
0
%
%
T
rF
White Black
1 Frame
Black
T
rR
White
1 Frame
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by TOPCON SR-3
Uniformity =
9)-(1 points 9in LuminanceMinimum
9)-(1 Points 9in LuminanceMaximum
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
document version 0.1 8/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 9
Product Specification
AU OPTRONICS CORPORATION
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
G190EG02 VG
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
R G B R G B
Gray Level = L127
R G B R G B
Gray Level = L0
R G B R G B
Method: Record dBV & DC value with TRD-100
Amplitude
DC
AC
Time
log20(dB)Flicker =
Hz) 30Level(at AC
Level DC
document version 0.1 9/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 10
Product Specification
Backlight
AU OPTRONICS CORPORATION
G190EG02 VG
3. Functional Block Diagram
The following diagram shows the functional block of the 19.0 inch Color TFT-LCD Module:
LVDS
+5V
Connector
Converter
I/F PCB Interface:
Receiver
DC/DC
LVDS
ASIC
Controller
Mini-LVDS
Transmitter
Gamma
Correction
Timing
G1024
TFT-LCD
1280*(3)*1024
G1
D1
LED Driver on system
Pixels
-
D3840
LED
187034-30091 / FI-XB30SSLA-HF15
Mating Type:
FI-X30HL (Locked Type)
FI-X30H (Unlocked Type)
document version 0.1 10/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 11
Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive
Voltage
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
LED Current ILED
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP 0 +55 [
VDD -0.3 +6.0 [Volt] Note 1,2
- 90
[mA] Note 1,2
G190EG02 VG
o
C] Note 3
Glass surface temperature
(operation)
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +70 [
Storage Humidity HST
Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: Temperature and relative humidity range are shown as the below figure.
1. 90% RH Max ( Ta ≦39℃)
2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃)
3. No condensation
Note 4: Function Judged only
TGS 0 +65 [oC] Note 3, Note 4
o
C]
5 90
[%RH]
Note 3
document version 0.1 11/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 12
Product Specification
AU OPTRONICS CORPORATION
Operating Range Storage Range
G190EG02 VG
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as following:
Symbol Parameter Min Typ Max Unit Conditions
VDD
IDD Input Current
Logic/LCD Drive
Voltage
4.5
-
5.0
0.94
5.5
1.1
[Volt] +/-10%
[A] VDD= 5.0V, All Black Pattern At 60Hz,
PDD
IRush Inrush Current
VDDrp
Note 1: Measurement conditions:
The duration of rising time of power input is 470us.
VDD Power
Allowable Logic/LCD
Drive Ripple Voltage
-
-
-
VDD= 5.0V, All Black Pattern At 75Hz,
4.7 5.5 [Watt] VDD= 5.0V, All Black Pattern At 60Hz
VDD= 5.0V, All Black Pattern At 75Hz
- 3.0 [A]
- 100 [mV] p-p
Note 1
VDD= 5.0V, All Black Pattern At 75Hz
document version 0.1 12/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 13
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of SN75LVDS82DGG
(Texas Instruments) in detail.
1. DC Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units Condition
VTH
VTL
│VID│ Input Differential Voltage 100 400 600 [mV] Note 1
VCM
Differential Input High
Threshold
Differential Input Low
Threshold
Differential Input Common
Mode Voltage
- - +100 [mV]
-100 - - [mV]
+1.0 +1.2 +1.5
[V]
VCM = 1.2V
Note 1
V
= 1.2V
CM
Note 1
VTH-VTL = 200mV (max)
Note 1
Note 1: LVDS Signal Waveform
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 13/28
Page 14
Product Specification
G190EG02 VG
AU OPTRONICS CORPORATION
2. AC characteristic
Description Symbol Min Max Unit Note
Maximum deviation of input clock
FDEV -
frequency during SSC
Maximum modulation frequency of
FMOD - 200 KHz
input clock during SSC
± 3
%
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 14/28
Page 15
Product Specification
Freq
max
center
DEV
< Spread Spectrum>
time
AU OPTRONICS CORPORATION
G190EG02 VG
F
Fcenter * F
F
Fmin
1
FMOD
5.2 Backlight Unit
Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature):
Symbol Parameter Min.
LED Operation Current - 65
IR
LED
VLB
P
BLU Power consumption (for reference)
BLU
LT
LED life Time (Typical)
LED
Light Bar Operation Voltage
(for reference)
Typ. Max. Unit Note
[mA]
Note 1
[Volt]
Note 2
[Hour]
Note 3
Operating with fixed
driving current
- 44.5 46.8
- 11.6
30,000
[Watt]
50,000
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 15/28
Page 16
Product Specification
AU OPTRONICS CORPORATION
Note 1 :The specified current is input LED chip 100% duty current.
Note 2 : The value showed in the table is one light bar’s operation voltage.
Note 3 : Definition of life time : brightness becomes 50% of its original value. The minimum life time of LED unit is on the
condition of IR
Note 4: Each LED light bar consists of 52 pcs LED package ( 4 strings x 13 pcs / string ).
= 60mA and 25±2℃(Room temperature).
LED
G190EG02 VG
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 16/28
Page 17
Product Specification
R G
AU OPTRONICS CORPORATION
G190EG02 VG
1st Line
1024th Line
1 2 1279 1280
R G B R G B
R G B R G B
6.2 The input data format
B R G B
R G B R G B
Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: Please follow PSWG.
Note3: 8-bit in
6.3 Signal Description
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.
document version 0.1 17/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 18
PIN # SIGNAL NAME DESCRIPTION
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
RxOIN0-
RxOIN0+
RxOIN1-
RxOIN1+
RxOIN2-
RxOIN2+
GND
RxOCLKIN-
RxOCLKIN+
RxOIN3-
RxOIN3+
RxEIN0-
RxEIN0+
GND
RxEIN1-
RxEIN1+
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data, DSPTMG)
Positive LVDS differential data input (Odd data, DSPTMG)
Power Ground
Negative LVDS differential clock input (Odd clock)
Positive LVDS differential clock input (Odd clock)
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Positive LVDS differential data input (Even data)
Negative LVDS differential data input (Even data)
17
18
19
20
21
22
23
24
25
26
27
28
29
30
GND
RxEIN2-
RxEIN2+
RxECLKIN-
RxECLKIN+
RxEIN3-
RxEIN3+
GND
GND
NC
NC
POWER
POWER
POWER
Power Ground
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Negative LVDS differential clock input (Even clock)
Positive LVDS differential clock input (Even clock)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Power Ground
No connection (for AUO test)
No connection (for AUO test)
Power +5V
Power +5V
Power +5V
Note1: Start from left side
document version 0.1 18/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 19
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
Note2: Input signals of odd and even clock shall be the same timing.
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 19/28
Page 20
6.4 Interface Timing
6.4.1 Timing Characteristics
Signal Item Symbol Min Typ Max Unit
Period Tv
Vertical
Section
Active Tdisp(v) 1024 1024 1024 Th
Blanking Tbp(v)+Tfp(v)+PWvs 8 42 126 Th
Product Specification
AU OPTRONICS CORPORATION
1032 1066 1150 Th
G190EG02 VG
Horizontal
Section
Clock
Frame Rate Frequency 1/Tv 50 60 75 Hz
Period Th 780 844 2047 Tclk
Active Tdisp(h) 640 640 640 Tclk
Blanking Tbp(h)+Tfp(h)+PWhs 140 204 - Tclk
Period Tclk 22.2 18.52 14.81 ns
Frequency Freq. 45 54 67.5 MHz
Note : DE mode only
document version 0.1 20/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 21
6.4.2 Timing Diagram
RGB Data
(Odd)
RGB Data
(Even)
Product Specification
G190EG02 VG
AU OPTRONICS CORPORATION
Hsync
DE
CLK
RGB Data
DE
Line Line Line Line Line Line
N
Hsync
Vsync
PWhs
Invalid Data
Invalid Data
Tbp(h)
Pixel
Pixel
2
1
Pixel Pixel
Pixel
4
3 9 M-1
Pixel
6
5 M-3
Pixel Pixel Pixel Pixel Pixel Pixel
7
8
10
12
11
Tdisp(h)
Tclk
Invalid Data
2
43
Tfp(v)
PWvs
Tbp(v)
Tv
Tdisp(v)
M-4
M-2
M
Invalid Data
PixelPixel
Tfp(h)
Invalid Data
N1
Th
Invalid Data
PixelPixelPixelPixel
M-5
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 21/28
Page 22
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
6.5 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the chart. Signals
from any system shall be Hi-Z state or low level when VDD is off.
T1
Power Supply VDD
10%
0V
LVDS Signal
Backlight On
Note1: insert a white pattern 360ms
Note2: insert a black pattern
Note3 :insert a white pattern after valid data and last until VDD falls to 10%.
Note4 :when AC on/off, timing rule of logo power on/off is the same as above.
90%
T2
Note 1
T3
Note 2
VALID
DATA
90%
T5
T4
Note 3
T6
10%
T7
Parameter
Min. Typ. Max.
T1 0.5 - 10 [ms]
T2 0 40 50 [ms]
T3 500 - - [ms]
T4 300 - - [ms]
T5 40 1500 - [ms]
T6 - - - [ms]
T7 1000 - - [ms]
document version 0.1 22/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Value
Unit
Page 23
Product Specification
AU OPTRONICS CORPORATION
G190EG02 VG
7. Connector & Pin Assignment
Physical interface is described as for the connector on module.These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
7.1.1 Connector
Connector Name / Designation Interface Connector / Interface card
Manufacturer P-TWO / JAE
Type Part Number 187034-30091 / FI-XB30SSLA-HF15
Mating Housing Part Number
FI-X30HL
FI-X30H (Unlocked Type)
7.1.2 Pin Assignment
Pin# Signal Name Pin# Signal Name
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
RxOIN0-
RxOIN1-
RxOIN2-
GND
RxOCLKIN+
RxOIN3+
RxEIN0+
RxEIN1-
GND
RxEIN2+
RxECLKIN+
RxEIN3+
GND
NC
POWER
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
RxOIN0+
RxOIN1+
RxOIN2+
RxOCLKIN-
RxOIN3-
RxEIN0-
GND
RxEIN1+
RxEIN2-
RxECLKIN-
RxEIN3-
GND
NC
POWER
POWER
document version 0.1 23/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 24
Product Specification
AU OPTRONICS CORPORATION
7.2 Connector on Backlight Unit.
This connector is mounted on LED light-bar.
Connector Name / Designation Light Bar Connector
Manufacturer ENTERY INDUSTRIAL CO., LTD
Type Part Number 3707K-Q06N-01R
7.2.1 Pin assignment
Pin no. Signal name
1 IRLED (current out)
2 IRLED (current out)
3 VLED (voltage in)
4 VLED (voltage in)
5 IRLED (current out)
6 IRLED (current out)
G190EG02 VG
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 24/28
Page 25
Product Specification
AU OPTRONICS CORPORATION
8. Reliability Test
Environment test conditions are listed as following table.
Items Required Condition
Temperature Humidity Bias (THB) Ta= 5
High Temperature Operation (HTO) Ta= 5
Low Temperature Operation (LTO) Ta=
High Temperature Storage (HTS) Ta=
Low Temperature Storage (LTS) Ta= -
Vibration Test
(Non-operation)
0
,
80%RH, 300hours
0
,
50%RH, 300hours
0
300h
0
7
0
2
o
,
,
u
300h
o
300h
,
Acceleration: 1.5 G
Wave: Random
Frequency: 10 - 200 - 10 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
G190EG02 VG
Note
rs
rs
u
o
rs
u
Acceleration: 50 G
Shock Test
(Non-operation)
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Drop Test Height: 60 cm, package test
Thermal Shock Test (TST) -
0
/
2
30min, 6
0
/
30min, 100 cycles
On/Off Test On/10sec, Off/10sec, 30,000 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
9 points, 25 times/ point.
ESD (ElectroStatic Discharge)
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
9 points, 25 times/ point.
Altitude Test
Operation:10,000 ft
Non-Operation:30,000 ft
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: According to EN61000-4-2 , ESD class B:
1
2
Some performance degradation allowed.
No data lost.
Self-recoverable.
No hardware failures.
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 25/28
Page 26
Product Specification
AU OPTRONICS CORPORATION
9. Shipping Label
The shipping label format is shown as below.
Note 1: For Pb Free products, AUO will add for identification.
G190EG02 VG
G190EG02 VG
Note 2: For RoHS compatible products, AUO will add
Note 3: For China RoHS compatible products, AUO will add
for identification.
for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
AUO Confidential For DATAMODUL AG(INTERNAL)
document version 0.1 26/28
Page 27
AU OPTRONICS CORPORATION
Product Specification
10. Mechanical Characteristic
document version 0.1 27/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Page 28
G190EG02 VG
AU OPTRONICS CORPORATION
Product Specification
document version 0.1 28/28
AUO Confidential For DATAMODUL AG(INTERNAL)
Loading...