How it Works
AUO
Loading...
G151EVN01.0
Specification
25 pgs1.06 Mb0

AUO G151EVN01.0 Specification

Download
Page 1
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
ϮϮϮϮPreliminary Specification ϭϭϭϭʳʳʳʳ Final Specification
Module 15.1” Color TFT-LCD (Free Shape LCD)
Model Name G151EVN01.0
Customer Date
Approved by Date
Checked &
Approved by
Date
Note: This Specification is subject to change without notice.
Vito Huang 2012/02/17
Prepared by Date
Jimmy Tsai 2012/02/16
General Display Business Division / AU Optronics corporation
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
Contents
1. Operating Precautions..................................................................................... 4
2. General Description......................................................................................... 5
2.1 Display Characteristics ..........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram............................................................................... 9
4. Absolute Maximum Ratings .......................................................................... 10
4.1 Absolute Ratings of TFT LCD Module .................................................................................10
4.2 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics .............................................................................. 11
5.1 TFT LCD Module.................................................................................................................. 11
5.2 Backlight Unit .......................................................................................................................13
6. Signal Characteristic ..................................................................................... 14
6.1 Pixel Format Image.............................................................................................................. 14
6.2 Signal Description ................................................................................................................15
6.3 The Input Data Format.........................................................................................................16
6.4 Interface Timing....................................................................................................................17
6.5 Power ON/OFF Sequence...................................................................................................18
7. Connector & Pin Assignment........................................................................ 19
7.1 TFT LCD Module: LVDS Connector ....................................................................................19
7.2 Backlight Unit: LED Connector............................................................................................20
8. Reliability Test ............................................................................................... 21
9. Mechanical Characteristics........................................................................... 22
10. Label and Packaging ................................................................................... 24
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................24
10.2 Carton Package .................................................................................................................24
11. Safety............................................................................................................ 25
11.1 Sharp Edge Requirements ................................................................................................25
11.2 Materials ............................................................................................................................. 25
11.3 Capacitors ..........................................................................................................................25
11.4 National Test Lab Requirement .........................................................................................25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
Version and
Date
0.1 2012/02/16
Page
All First Edition for Customer All
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Old description New Description Remark
G151EVN01.0
3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
1. Operating Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open or modify the Module Assembly.
8) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, take it easily, or the TFT Module may be damaged.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary.
At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to
the TFT Module from outside. Otherwise the TFT Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
12) Severe temperature condition may result in different luminance, response time and LED life time.
13) The data on this specification sheet is applicable when LCD module is placed in landscape position.
14) Continuous displaying fixed pattern may induce image sticking. It is recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
2. General Description
This specification applies to the 15.1 inch-wide Color TFT-LCD Module G151EVN01.0.
The display supports the 1280(H) x 248(V) screen format and 16.7M colors. All input signals are 2 Channels LVDS interface compatible.
LED driver board is included. G151EVN01.0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 к condition:
Items Unit Specifications
Screen Diagonal [inch] 15.1
Active Area [mm]
Pixels H x V
Pixel Pitch [mm]
376.32 (H) x 72.91(V)
1280(x3) x 248
0.294 (per one triad) x 0.294
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode P-MVA Mode,Normally Black
Nominal Input Voltage VDD [Volt] +5.0 V
Typical Power Consumption [Watt]
10.85 (1.25 (TFT)+9.6 (LED) W (Typ)) (All white pattern) (TBD)
Weight [Grams] 700 (Max)
Physical Size [mm]
396 (H) x 100.8 (V) x 17.3 (D)
Electrical Interface Dual Channel LVDS
Surface Treatment Anti-glare, Hardness 3H
Support Color 16.7M colors (8-bits )
Temperature Range
Operating Storage (Non-Operating)
o
C]
[
o
C]
[
0 to +50
-20 to +60
RoHS Compliance RoHS Compliance
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25к (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
White Luminance
Uniformity
Contrast Ratio
Cross talk
Response Time [msec]
Viewing Angle
Color / Chromaticity Coordinates (CIE 1931)
Color Gamut %
[cd/m2]
%
%
[degree] [degree]
[degree] [degree]
240 300 - 1
75 80 - 1, 2, 3
9 Points
I
= 80mA
F
1600 2000 - 4
- - 1.5 5
Rising - 15
Falling -
Rising + Falling -
5 -
20 -
Gray to Gray - 8 -
Horizontal (Right) CR = 10 (Left)
Vertical (Upper) CR = 10 (Lower)
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
75
75
75
75
89
89
89
89
0.597 0.647 0.697
0.290 0.340 0.390
0.277 0.327 0.377
0.551 0.601 0.651
0.092 0.142 0.192
0.017 0.067 0.117
0.263 0.313 0.363
0.279 0.329 0.379
- 70 -
G151EVN01.0
-
6
-
­7
-
-
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital
Aperture
1 with 50cm viewiш ng distance
Voltmeter, Luminance meter (SR_3 or equivalent)
Test Point Center
Environment < 1 lux
LCD Module
SR_3 or
equivalent
Measuring distance
6
Module Driving Equipment
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
(CR)
g
g
A
A
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
Note 2: Definition of 9 points position (Display active area)
90 %
50 %
10 %
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test point luminance
Minimum Brightness of nine points
Ӭ
Note 4Κ Definition of contrast ratio (CR):
Contrast ratio
Note 5Κ Definition of cross talk (CT)
W9
=
Maximum Brightness of nine points
htness on the “White” state
Bri
=
htness on the “Black” state
Bri
CT = | YB – YA | / YA × 100 (%) Where YA = Luminance of measured location without gray level 255 pattern (cd/m2) YB = Luminance of measured location with gray level 255 pattern (cd/m2)
1/2
1/6
2/3 1/3
1/6
1/2
B
127 gray level
127 gray level
7
1/2
’
1/6
1/6
1/3
1/2
B’
2/3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
%
100
90
90
10
10
Tf Tr
White Black White
White Black White
0
0
Tr
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling
time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of
amplitudes. Please refer to the figure as below.
Optical
Optical
response
response
G151EVN01.0
Note 7: Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and 180° vertical Њ
range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right,
and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface
with the screen rotated to its center to develop the desired measurement viewing angle.
8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
R
S
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 15.1 inches wide Color TFT-LCD Module:
+5V
LVD
DC/DC
Converter
Connector
I/F + X-PCB
LVDS
Receiver
Gamma
Correction
LVDS Connector: JAE ( L
ED Connector: STM,P24033P6 or equivalent.
FI-XB30SSL-HF15) or equivalent.
Timing
Controller
DC POWE
LED driver board
D1 D3840
G1
-
-
TFT-LCD
1280*(3)*248
Pixels
G248
30 LEDs
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
9
www.panelook.com
Page 10
Global LCD Panel Exchange Center
V
[
]
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit
Logic/LCD Drive Voltage
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit
Operating Temperature TOP 0 +50 [oC]
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST
DD -0.3 +5.5
5 90
[%RH]
G151EVN01.0
Volt
Note: Maximum Wet-Bulb should be 39 and no condensation. к
Operating Range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Storage Range
10
www.panelook.com
Page 11
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Units Remark
VDD
IDD
PDD
Measurement condition:
Logic/LCD Drive Voltage
VDD Current - 0.25 - [A]
VDD Power -
(High to Low) Control Signal
+5.0V
R1 47K
3.0 5.0 5.5 [Volt]
f10%
VDD= 5.0V, All White Pattern
At 60Hz VDD= 5.0V, All White Pattern
1.25 1.38
Q3
AO6402
D6 D5 D2 S D1
G
D2SD1D5
D6
R2
G
Q3
AO6402
[Watt]
F1
At 60Hz
C1 1uF/16V
G151EVN01.0
VCC
(LCD Module Input)
1K
C3
0.01uF/25V
SW1
SW MAG-SPST
1 2
+12.0V
C2 1uF/25V
VR1
47K
90%
5.0V
10%
VDD rising time
0V
11
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
V
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol Item Min. Typ. Max. Unit Remark
VTH
VTL
Differential Input High Threshold
Differential Input Low Threshold
ѨVIDѨ Input Differential Voltage
VICM
Differential Input Common Mode Voltage
Note: LVDS Signal Waveform.
- -
-100 -
100
-
100 400 600
0.3 - 1.25
G151EVN01.0
[mV] VCM=1.2V
[mV] VCM=1.2V
[mV]
[V] VTH/VTL=100mV
V T
ѨVIDѨ
VICM
SS
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
12
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
5.2 Backlight Unit
5.2.1 LED Light Bar
Following characteristics are measured under stable condition at 25 (Room Temperature)к .
Symbol Parameter Min Typ Max
VLED Input Voltage 10.8 12 13.2 Volt
ILED Input Current - 0.8 - A 100% Dimming
PLED Power Consumption - 9.6 10.56 Watt 100% Dimming, Note3
FPWM PWM Dimming Frequency 200 - 20K Hz
Swing Voltage 3 3.3 5 Volt
Dimming Duty Cycle 10 - 100 %
Vanalog Analog Dimming Voltage - N/A - No Analog Dimming
Unit
Remark
Operating Life 50000 - - Hrs Ta = 25oC
Note 1: Ta means ambient temperature of TFT-LCD module,
Note 2: If module is driven by high current or at high ambient temperature & humidity condition. The operating life will be
reduced.
Note 3: LED light bar structure: (5 strings x 6pcs / string =30pcs of LED)
Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
)
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.. Although this panel resolution is 1280x248, please input 1280x1024 format signal to it. And the data after line 249 (inlculde 249) ALL should be set to “black” command.
1st Line
248 Line
1 2 1279 1280
R G B R G B
R G B R G B
Physical pixel format
1024 Line
R G B R G B
R G B R G B
Data input (1280x1024
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
14
www.panelook.com
Page 15
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
6.2 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.
PIN # SIGNAL NAME DESCRIPTION
1 RXinO0- Negative LVDS differential data input (Odd data)
2 RXinO0+ Positive LVDS differential data input (Odd data)
3 RXinO1- Negative LVDS differential data input (Odd data)
4 RXinO1+ Positive LVDS differential data input (Odd data)
5 RXinO2- Negative LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
6 RXinO2+ Positive LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
7 GND Power Ground
8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN+ Positive LVDS differential clock input (Odd clock)
10 RXinO3- Negative LVDS differential data input (Odd data)
11 RXinO3+ Positive LVDS differential data input (Odd data)
12 RXinE0- Negative LVDS differential data input (Even data)
13 RXinE0+ Positive LVDS differential data input (Even data)
14 GND Power Ground
15 RXinE1- Positive LVDS differential data input (Even data)
16 RXinE1+ Negative LVDS differential data input (Even data)
17 GND Power Ground
18 RXinE2- Negative LVDS differential data input (Even data)
19 RXinE2+ Positive LVDS differential data input (Even data)
20 RxECLKIN- Negative LVDS differential clock input (Even clock)
21 RxECLKIN+ Positive LVDS differential clock input (Even clock)
22 RXinE3- Negative LVDS differential data input (Even data)
23 RXinE3+ Positive LVDS differential data input (Even data)
24 GND Power Ground
25 NC No contact (For AUO test only)
26 NC No contact (For AUO test only)
27 NC No contact (For AUO test only)
28 VCC +5.0V Power Supply
29 VCC +5.0V Power Supply
30 VCC +5.0V Power Supply
15
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
6.3 The Input Data Format
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
Note1: 8-bits signal input. Note2: L:NS alike H:Thine alike
document version 0.1
16
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
6.4 Interface Timing
6.4.1 Timing Characteristics
Signal Item Symbol Min Typ Max Unit
Clock Frequency 1/ T
Frame Rate Frequency 1/Tv 50 60 75 Hz
Vertical
Section
Horizontal
Section
Note: DE mode only.
Period
Active T
Blanking T
Period T
Active T
Blanking T
60 72.1 85 MHz
Clock
T
V
VD
VB
H
HD
HB
1058 1066 2048
1050 1050 1050
8 16 998
880 1128 2048
840 840 840
40 288 1208
G151EVN01.0
T_line
T_clock
6.4.2 Input Timing Diagram
DOTCLK
Input Data
DE
DE
T
CLOCK
Invaild
Data
T
HB
Input Timing Definition ( DE Mode)
Pixel1Pixel2Pixel3Pixel
T
HD
T
H
T
VB
T
V
N-1
T
VD
Pixel
N
Invaild
Data
Pixel
1
17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
6.5 Power ON/OFF Sequence
VDD power and B/L on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
or Analog dimming
Power ON/OFF sequence timing
Value
Parameter
Units
Min. Typ. Max.
T1 0.5 -- 10 [ms]
T2 30 40 50 [ms]
T3 200 -- -- [ms]
T4 0.5 -- 10 [ms]
T5 10 -- -- [ms]
T6 10 -- -- [ms]
T7 0 -- -- [ms]
T8 10 -- -- [ms]
T9 -- -- 10 [ms]
T10 110 -- -- [ms]
T11 0 16 50 [ms]
T12 -- -- 10 [ms]
T13 1000 -- -- [ms]
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the
power when you plug the cable into the input connector or pull the cable out of the connector.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
18
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.
7.1 TFT LCD Module: LVDS Connector
Connector Name / Designation Interface Connector / Interface card
Manufacturer
Type Part Number LVDS : JAE (FI-XB30SSL-HF15) or equivalent.
Mating Housing Part Number FI-X30H (JAE) or compatible
Pin# Signal Name Pin# Signal Name
1 RxOIN0- 2 RxOIN0+
LVDS: JAE or compatible
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 GND 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 GND
15 RxEIN1- 16 RxEIN1+
17 GND 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 GND
25 NC 26 NC
27 NC 28 VCC
29 VCC 30 VCC
19
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
7.2 Backlight Unit: LED Connector
Connector Name / Designation LED Connector
Manufacturer SIN SHENG or compatible
Connector Model Number STM,P24033P6
Mating Model Number 2404PS-2 or compatible
PIN # SIGNAL NAME DESCRIPTION
1 V12 Input voltage, 12V
2 V12 Input voltage, 12V
3 V12 Input voltage, 12V
4 - NC
G151EVN01.0
5 GND Ground
6 GND Ground
7 GND Ground
8 BL_EN Back light enable, 5V
9 BL_DIM_P Back light dimming, 3.3V
20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
8. Reliability Test
Environment test conditions are listed as following table.
Items
Temperature Humidity Bias
High Temperature Operation
Low Temperature Operation
High Temperature Storage Ta= 60 , 300hoursк
Low Temperature Storage Ta= -20 , 300hoursк
Thermal Shock Test
Shock Test (Non-Operating)
Vibration Test (Non-Operating)
Required Condition Note
Ta= 50 , к 80%RH, 300hours
Ta= 50 , 300hoursк
Ta= 0 , 300hoursк
-20к/30min, 60к/30min, 100 cycles
50G,20ms,Half-sine wave,( ±X, ±Y, ±Z)
1.5G, (10~200Hz, P-P)
30 mins/axis (X, Y, Z)
G151EVN01.0
On/off test
On/10 sec, Off/10 sec, 30,000 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
Note 1
ESD
8 points, 25 times/ point.
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
8 points, 25 times/ point.
Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
9. Mechanical Characteristics
G151EVN01.0
document version 0.1
22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G151EVN01.0
AU OPTRONICS CORPORATION
10. Label and Packaging
10.1 Shipping Label
(on the rear side of TFT-LCD display)
G151EVN01.0
10.2 Carton Package
The outside dimension of carton is 478(L)mm* 281(W)mm*488(H)mm, carton and cushion weight are 2820g.
30 pieces per carton box.
2*4 boxes per layer. By air, 2 layer / pallet. By sea, refer packing documents. Pallet size (not include carton boxes):
1150 mm * 980 mm * 132 mm
24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
11. Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
G151EVN01.0
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 60950-1, 2nd Edition, 2007-03027 (Information Technology Equipment)
25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use