Page 1
Global LCD Panel Exchange Center
www.panelook.com
(V
) Preliminary Specifications
G150XTN05.0
() Final Specifications
Module 15 Inch Color TFT-LCD
Model Name G150XTN05.0
Customer Date
Approved by Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Vito Huang 2012/6/12
Prepared by
Wennie Lee 2012/6/12 __
General Display Business Division /
AU Optronics corporation
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
1/25
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
Contents
1. Operating Precautions.....................................................................................4
2. General Description.........................................................................................5
2.1 Display Characteristics...........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram ...............................................................................9
4. Absolute Maximum Ratings ..........................................................................10
4.1 Absolute Ratings of TFT LCD Module .................................................................................10
4.2 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics ..............................................................................11
5.1 TFT LCD Module.................................................................................................................. 11
5.2 Backlight Unit........................................................................................................................13
6. Signal Characteristic .....................................................................................14
6.1 Pixel Format Image ..............................................................................................................14
6.2 Scanning Direction ...............................................................................................................14
6.3 Signal Description ................................................................................................................15
6.4 The Input Data Format .........................................................................................................16
6.5 Interface Timing ....................................................................................................................17
6.6 Power ON/OFF Sequence ...................................................................................................18
7. Connector & Pin Assignment........................................................................19
7.1 TFT LCD Module: LVDS Connector.....................................................................................19
7.2 Backlight Unit: LED Driver Connector .................................................................................21
7.3 LED Connector Pin Assignment ..........................................................................................21
9. Mechanical Characteristics ...........................................................................23
9.1 LCM Outline Dimension (Front View) ..................................................................................23
9.2 LCM Outline Dimension (Rear View)...................................................................................23
10. Label and Packaging....................................................................................24
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................24
10.2 Carton Package .................................................................................................................24
11 Safety.............................................................................................................25
11.1 Sharp Edge Requirements.................................................................................................25
11.2 Materials .............................................................................................................................25
11.3 Capacitors...........................................................................................................................25
11.4 National Test Lab Requirement..........................................................................................25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
2/25
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
Record of Revision
Version and Date Page Old description New Description
0.0 2012/6/1 All First Edition
0.1 2012/6/12 13
15
LED: 7.2(typ) P
P
LED:6.48(min), 7.2(typ), 7.92(max)
Vanalog: 2.0(min), 5(typ), 5.5(max) NA
Singal description: typo
G150XTN05.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
3/25
www.panelook.com
Page 4
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the CCFL Reflector edge. Instead,
press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a
very short time. Please design your display product well to avoid external force applying
to module by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module.
The TFT-LCD module should be supplied by power complied with requirements of
Limited Power Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may
accelerate LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to
use screen saver or moving content periodically if fixed pattern is displayed on the
screen.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
4/25
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
2. General Description
G150XTN05.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) colors. All input signals are LVDS interface compatible.
All design rules of this module can correspond to PSWG standard.
G150XTN05.0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
Items Unit Specifications
Screen Diagonal [inch] 15
condition:
Active Area [mm] 304.128(H) x 228.096(V)
Pixels H x V 1024x3(RGB) x 768
Pixel Pitch [mm] 0.297 x 0.297
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN, Normally White
Nominal Input Voltage VDD [Volt] 3.3 typ.
Typical Power Consumption [Watt] 9.1 typ.
Weight [Grams] 1000g (max.)
Physical Size [mm] 326.5(H)x 253.5(V) x 12.0(D) (max.)
Electrical Interface 1 channel LVDS
Surface Treatment Anti-glare, Hardness 3H
Support Color 16.2M colors
Temperature Range
Operating
Storage (Non-Operating)
[
к]
[к]
-
30 to +85
-30 to +85
RoHS Compliance RoHS Compliance
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
5/25
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
White Luminance
Uniformity
Contrast Ratio
Cross talk
Response Time
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut %
[cd/m2]
%
%
[msec]
[msec]
[msec]
[degree]
[degree]
[degree]
[degree]
280 350 - 1
9 Points
400
75 80 - 1, 2, 3
700 - 4
- 1.2 1.5 5
Rising
Falling
Raising + Falling
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
-
- 2.3
- 8
70
70
60
50
0.579 0.629 0.679
0.299 0.349 0.399
0.273 0.323 0.373
0.562 0.612 0.662
0.104 0.154 0.204
0.033 0.083 0.133
0.263
0
.279
60
5.7
80
80
70
60
0.313
0.329
65 -
G150XTN05.0
6
-
7
-
-
0.363
0.379
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture 1шwith 50cm viewing distance
Test Point Center
Environment < 1 lux
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
6/25
www.panelook.com
Page 7
Global LCD Panel Exchange Center
(CR)
g
g
A
A
www.panelook.com
G150XTN05.0
Note 2: Definition of 9 points position (Display active area : 304.128(H) x 228.096(V))
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
50 %
Minimum Brightness of nine points
W9
=
Maximum Brightness of nine points
htness on the “White” state
Bri
=
htness on the “Black” state
Bri
Note 4Κ Definition of contrast ratio (CR):
Ӭ
Contrast ratio
N
ote 5Κ Definition of cross talk (CT)
10 %
10 %
50 %
90 %
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
1/2
184 gray level
1/6
1/6
1/2
B
1/2
2/3 1/3
’
1/6
B’
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
1/6
1/3
1/2
2/3
G150XTN05.0 rev. 0.1
7/25
www.panelook.com
Page 8
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
Optical
Optical
response
response
%
100
90
90
10
10
Tf Tr
White Black White
White Black White
0
0
Tr
Note 7: Definition of viewing angle
horizontal and 180
vertical range (off-normal viewing angles). The 180 viewing angle range is broken down as below: 90ʳ(Ӱ) horizontal
left and right, and 90ʳ(ӥ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the
display surface with the screen rotated to its center to develop the desired
measurement viewing angle.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
8/25
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
3. Functional Block Diagram
The following diagram shows the functional block of the 15 inch color TFT/LCD module:
G150XTN05.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
9/25
www.panelook.com
Page 10
Global LCD Panel Exchange Center
V
[
]
www.panelook.com
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit
Logic/LCD Drive Voltage
in -0.3 +4.0
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit
Operating Temperature TOP -30 +85 [oC]
Operation Humidity HOP 8 90
Storage Temperature TST -30 +85 [oC]
Storage Humidity HST
Note: Maximum Wet-
! "
#
8 90
$ %%
o condensation.
[%RH]
G150XTN05.0
Volt
[%RH]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
10/25
www.panelook.com
Page 11
Global LCD Panel Exchange Center
V
www.panelook.com
G150XTN05.0
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Units Remark
VDD
IDD
PDD
Logic/LCD Drive
Voltage
VDD Current
VDD Power
Note 1: Measurement condition:
(High to Low)
Control
Signal
+3.3V
3.0 3.3 3.6 [Volt]
550 660 [mA]
1.9 2.2 [Watt]
Q3
AO6402
D6
D5
D2 S
D1
G
D2SD1D5
D6
G
AO6402
R1
47K
-
-
R2
Q3
f10%
64 Gray Bar Pattern
(VDD=3.3V, at 60Hz)
64 Gray Bar Pattern
(VDD=3.3V, at 60Hz)
F1
C1
1uF/16V
DD
VCC
(LCD Module Input)
1K
C3
0.01uF/25V
SW1
SW MAG-SPST
1 2
+12.0V
C2
1uF/25V
R2
1K
VR1
47K
90%
3.3V
10%
0V
470 us
VDD rising time
64 Gray pattern
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
11/25
www.panelook.com
Page 12
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol Item Min. Typ. Max. Unit Remark
VTH
VTL
Differential Input High Threshold - - 100
Differential Input Low Threshold -100 - -
ΨVIDΨ Input Differential Voltage
VICM
Differential Input Common Mode Voltage
Note: LVDS Signal Waveform.
100 400 600
1.1 1.45
[mV] VCM=1.2V
[mV] VCM=1.2V
[mV]
VTH/VTL=100mV
[V]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
12/25
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
5.2 Backlight Unit
5.2.1 Parameter guideline for LED
' (
)
Unit
&
om Temperature).
Following characteristics are measured under stable condition using a LED driving board at 25
Symbol Parameter Min Typ Max
Vcc Input Voltage 10.8 12 12.6 Volt
Ivcc Input Curent - 0.6 - A 100% Dimming
PLED Power Consumption 6.48 7.2 7.92 Watt 100% Dimming
FPWM PWM Dimming Frequency 200 - 20k Hz
Swing Voltage 4.5 5 5.5
Dimming Duty Cycle 5 - 100 %
IF LED Forward Current - 80 mA Ta = 25oC
Operating Life 50000 - - Hrs Ta = 25oC
G150XTN05.0
Remark
Note 1: Ta means ambient temperature of TFT-LCD module.
Note 2: If G150XTN05.0 module is driven at high ambient temperature & humidity condition. The operating life will be
reduced.
Note 3: Operating life means brightness goes down to 50% initial brightness. Min. operating life time is estimated data.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
13/25
www.panelook.com
Page 14
Global LCD Panel Exchange Center
www.panelook.com
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
G150XTN05.0
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
AUO
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
14/25
www.panelook.com
Page 15
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential
signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative
edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx)
transmits even pixels.
3804-F20N-06R (E&T) / MSB240420E(STM)
Pin No. Symbol Description
1 VDD Power Supply, 3.3V (typical)
2 VDD Power Supply, 3.3V (typical)
3 VSS Ground
4 NC N/A
5 Rin1- - LVDS differential data input (R0-R5, G0)
6 Rin1+ + LVDS differential data input (R0-R5, G0)
7 VSS Ground
8 Rin2- - LVDS differential data input (G1-G5, B0-B1)
9 Rin2+ + LVDS differential data input (G1-G5, B0-B1)
10 VSS Ground
11 Rin3- - LVDS differential data input (B2-B5, HS, VS, DE)
12 Rin3+ + LVDS differential data input (B2-B5, HS, VS, DE)
13 VSS Ground
14 ClkIN- - LVDS differential clock input
15 ClkIN+ + LVDS differential clock input
16 GND Ground
17 Rin4- - LVDS differential data input (R6-R7, G6-G7,B6-B7) *Note2
18 Rin4+ - LVDS differential data input (R6-R7, G6-G7,B6-B7) *Note2
19 VSS Ground
20 NC N/A
Note 1: Input signals shall be in low status when VDD is off.
Note 2: High stands for “3.3V”, Low stands for “GND”, NC stands for “No Connection”.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
15/25
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
6.4 The Input Data Format
6.4.1 LVDS Input
RxCLKIN
IN1
Rx
RxIN2
RxIN3
RxIN4
Note1: Please follow PSWG.
Note2: R/G/B data 7:MSB, R/G/B data 0:LSB
ignal Name Description Remark
S
R7
R6
R5
R4
R3
R2
R1
R0
G7
G6
G5
G4
G3
G2
G1
G0
B7
B6
B5
B4
B3
B2
B1
B0
RxCLKIN LVDS Data Clock
DE Data Enable Signal When the signal is high, the pixel data
VS Vertical Synchronous Signal
HS Horizontal Synchronous Signal
G0 R5 R4 R3 R2 R1 R0
B1
DE VS HS B5 B4 B3 B2
RSV B7 B6 G7 G6 R7 R6
Red Data 7
Red Data 6
Red Data 5
Red Data 4
Red Data 3
Red Data 2
B0 G5 G4 G3 G2 G1
Red-pixel Data
For 8Bits LVDS input
MSB: R7 ; LSB: R0
Red Data 1
Red Data 0
Green Data 7
Green Data 6
Green Data 5
Green Data 4
Green Data 3
Green Data 2
Green-pixel Data
For 8Bits LVDS input
MSB: G7 ; LSB: G0
Green Data 1
Green Data 0
Blue Data 7
Blue Data 6
Blue Data 5
Blue Data 4
Blue Data 3
Blue Data 2
Blue-pixel Data
For 8Bits LVDS input
MSB: B7 ; LSB: B0
Blue Data 1
Blue Data 0
shall be valid to be displayed.
G150XTN05.0
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
16/25
www.panelook.com
Page 17
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
6.5 Interface Timing
6.5.1 Timing Characteristics
Signal Parameter Symbol Min. Typ. Max. Unit
Clock Timing Clock frequency 1/ T
Vsync Timing Vertical
Section
Period T
Active T
Blanking
Hsync Timing Horizontal
Section
Period T
Active T
Blanking
Frame Rate F
Note: DE mode only.
Note : Typical value refer to VESA STANDARD
T
T
Clock
V
VD
VB
H
HD
HB
50 65 81
776 806 900
768 768 768
8 38 132
1054 1344 2048
1024 1024 1024
30 320 1024
50 60 75
MHz
T
Line
T
Clock
Hz
6.5.2 Input Timing Diagram
DOTCLK
Input
Data
DE
DE
T
CLOCK
Invaild
Data
T
HB
Input Timing Definition ( DE Mode)
Pixel1Pixel2Pixel3Pixel
T
HD
T
H
T
VB
T
V
N-1
T
VD
Pixel
N
Invaild
Data
Pixel
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
17/25
www.panelook.com
Page 18
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
6.6 Power ON/OFF Sequence
VDD power and LED on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low
level when VDD is off.
Power ON/OFF sequence timing
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off
the power when you plug the cable into the input connector or pull the cable out of the connector.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
18/25
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
G150XTN05.0
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating
the following signals and will be following components.
7.1 TFT LCD Module: LVDS Connector
Connector Name / Designation Signal Connector
Manufacturer E&T or compatible
Connector Model Number 3804-F20N-06R / MSB240420E
Adaptable Plug HRS DF14-20S-1.25C
Signal Name Pin# Signal Name
Pin#
1
3
5
7
9
11
13
15
17
19
VDD
VSS
Rin1-
VSS
Rin2+
Rin3-
VSS
ClkIN+
Rin4-
VSS
2 VDD
4 NC
6
8 Rin2-
10 VSS
12 Rin3+
14
16 GND
18 Rin4+
20 NC
Rin1+
ClkIN-
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
19/25
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
7.1.1 Connector Illustration
LVDS(CN1):
CN2 CN1CN2 CN1
G150XTN05.0
BLU Power in(CN2):
SEL68
pin1 pin5pin1 pin5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
20/25
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
7.2 Backlight Unit: LED Driver Connector
Connector Name / Designation LED Driver Connector
Manufacturer ENTERY or compatible
Connector Model Number 3808K-F05N-02R or compatible
Mating Model Number H208K-P05N-02B or compatible
7.3 LED Connector Pin Assignment
Pin# Symbol Signal Name
1 Vcc 12V
G150XTN05.0
2 GND GND
3 Enable 5V-On / 0V-Off
4 Dimming PWM Dimming
5 NC NC
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
21/25
www.panelook.com
Page 22
Global LCD Panel Exchange Center
www.panelook.com
8. Reliability Test Criteria
Items
Temperature
Humidity Bias
High Temperature
Operation
Low Temperature
Operation
Hot Storage
Cold Storage
Thermal Shock
Test
Shock Test
(Non-Operating)
Vibration Test
(Non-Operating)
Required Condition Note
50к/80%,300 hours
85к,300 hours
-30к,300 hours
85к,300 hours
-30к,300 hours
-20к
50G,20ms,Half-sine wave,( ±X, ±Y, ±Z)
1.5G, (10~200Hz, P-P)
30 mins/axis (X, Y, Z)
+ ,-.
*
G150XTN05.0
1 ,
+ ,-.
2
/
0
*
3 , ,
/
4 5 467 8
0
On/off test
ESD
On/10 sec, Off/10 sec, 30,000 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point
Note 1
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point
Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
22/25
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
9. Mechanical Characteristics
9.1 LCM Outline Dimension (Front View)
G150XTN05.0
9.2 LCM Outline Dimension (Rear View)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
23/25
www.panelook.com
Page 24
Global LCD Panel Exchange Center
www.panelook.com
10. Label and Packaging
10.1 Shipping Label
(on the rear side of TFT-LCD display)
10.2 Carton Package
G150XTN05.0
G150XTN05.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
24/25
www.panelook.com
Page 25
Global LCD Panel Exchange Center
www.panelook.com
11 Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
G150XTN05.0
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 1950, First Edition U.S.A. Information Technology Equipment
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XTN05.0 rev. 0.1
25/25
www.panelook.com
Loading...