AUO B131HW02 V0 Specification

Product Specification
( ( V ) Final Specifications
Module 13.1” FHD 16:9 Color TFT-LCD
with LED Backlight design
AU OPTRONICS CORPORATION
Model Name
Note
B131HW02 V0 (H/W:0A)
LED Backlight with driving circuit design
Customer Date
Checked &
Approved by
Date
Approved by Date
Allen KC Huang
Prepared by Date
2010/12/17
Note: This Specification is subject to change without notice.
Tony Kao
NBBU Marketing Division
AU Optronics corporation
2010/12/17
B131HW02 V0 Document Version : 1.0
1 of 28
Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 4
2. General Description ................................................................ 5
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
3. Functional Block Diagram ..................................................... 11
4. Absolute Maximum Ratings................................................... 12
4.1 Absolute Ratings of TFT LCD Module.............................................................................................12
4.2 Absolute Ratings of Environment .....................................................................................................12
5. Electrical Characteristics....................................................... 13
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit ...................................................................................................................................14
6. Signal Interface Characteristic.............................................. 14
6.1 Pixel Format Image ...........................................................................................................................14
6.2 Integration Interface Requirement.....................................................................................................15
6.3 Interface Timing ................................................................................................................................17
6.4 Power ON/OFF Sequence .................................................................................................................19
7. Panel Reliability Test ............................................................ 20
7.1 Reliability Test...................................................................................................................................20
8. Mechanical Characteristics.................................................... 21
8.1 LCM Outline Dimension...................................................................................................................21
9. Shipping and Package ........................................................... 23
9.1 Shipping Label Format......................................................................................................................23
9.2 Carton Package..................................................................................................................................24
9.3 Shipping Package of Palletizing Sequence........................................................................................25
10. Appendix............................................................................. 26
10.1 EDID Description............................................................................................................................26
B131HW02 V0 Document Version : 1.0
2 of 28
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
0.1 2010/09/01 All First Edition for Customer
0.2 2010/10/18 26 Old EDID setting New EDID setting
1.0 2010/12/17 All N/A Final Spec
5 Glass Thickness: 0.5mm Glass Thickness: 0.21mm*2=0.42mm Revised
Old description New Description Remark
Revised
B131HW02 V0 Document Version : 1.0
3 of 28
Product Specification
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
AU OPTRONICS CORPORATION
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a LED light bar build in as a light source of back light unit. It can prevent electrostic breakdown.
B131HW02 V0 Document Version : 1.0
4 of 28
Product Specification
Thickness
2. General Description
B131HW02 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 16:9 HD, 1920(H) x1080(V) screen and 16.7M colors (RGB 24-bits data driver) with LED backlight driving circuit. All input signals are display port interface compatible.
B131HW02 V0 is designed for a display unit of notebook style personal computer and industrial machine.
AU OPTRONICS CORPORATION
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 331.76
Active Area [mm] 289.152X162.648
Pixels H x V 1920x3(RGB) x 1080
Pixel Pitch [mm] 0.1506X0.1506
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance (I
(Note: ILED is LED current)
LED
=19mA)
[cd/m2] 300 typ. (5 points average, gamma correction
off) 210 min. (5 points average, gamma correction off)
Luminance Uniformity 1.82 max. (9 points) Contrast Ratio 500 typ Response Time [ms] 16 typ/ 30 Max (gamma correction off)
Nominal Input Voltage VDD [Volt] +2.5 typ.
Power Consumption [Watt] 4.65 typ. (Include Logic and Blu power)
Weight [Grams] 158 typ. Physical Size
Include bracket & PCBA
[mm]
Min. Typ. Max.
Length 298.6 299.1 299.6
Width 183.8 184.3 184.8
2.35 2.99
Electrical Interface eDP 2Lane
Glass Thickness [mm] 0.5
Surface Treatment Anti-Glare, Hardness 4H,
B131HW02 V0 Document Version : 1.0
5 of 28
Product Specification
RoHS Compliance
Support Color 16.7M colors ( RGB 24-bit )
AU OPTRONICS CORPORATION
Temperature Range
Operating Storage (Non-Operating)
[oC] [oC]
0 to +50
-20 to +60
RoHS Compliance
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature) :
Item Symbol
White Luminance
I
LED
=19mA
Viewing Angle
Luminance Uniformity
Contrast Ratio CR
Cross talk %
Response Time
Red
Color /
Green
Chromaticity
Coodinates
Blue
White
θR θL
ψH ψL
δ9P
Tr Rising
Tf Falling
TRT Rising + Falling
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
Conditions Min. Typ. Max. Unit Note
5 points average
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
9 Points
210 300 -
40
40
30
40
55
55
50
55
- - 1.82
300 500 -
TBD
-
3
- 13 24
- 16 30
0.639 0.685 0.731
0.283 0.338 0.394
0.184 0.230 0.276
0.642 0.697 0.753
CIE 1931
0.109 0.155 0.201
0.020 0.076 0.131
0.268 0.311 0.353
0.278 0.332 0.387
-
-
-
-
6
cd/m
degree
msec
2
1, 4, 5.
4, 9
2, 3, 4
4, 6
4, 7
4, 8
4
Adobe %
B131HW02 V0 Document Version : 1.0
- 96 -
6 of 28
Product Specification
=
Maximum Brightness of thirteen points
Minimum Br
ightness of thirteen points
Maximum Brightness of five
points
=
Minimum Brightness of five points
Note 1: 5 points position (Ref: Active area)
H /4
H /4
AU OPTRONICS CORPORATION
W / 4 W /4 W / 4 W / 4
W
1 2
H
H /4
H /4
Note 2: 9 points position (Ref: Active area)
3
4
5
Note 3: The luminance uniformity of 5 or 9 points is defined by dividing the maximum luminance values by the minimum test point luminance
δ
W5
δ
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting
Backlight for 60 minutes in a stable, windless and dark room, and it should be measured in the center of screen.
B131HW02 V0 Document Version : 1.0
W9
7 of 28
Product Specification
Field=2
°
Contrast ratio (CR)=
Brightness on the “White” state
Brightness on the “Blac
k” state
AU OPTRONICS CORPORATION
Photo detector
Note 5 Definition of Average Luminance of White (YL):
Measure the luminance of gray level 63 at 5 pointsY
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6 Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L
Note 7 Definition of Cross Talk (CT)
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
B131HW02 V0 Document Version : 1.0
8 of 28
Product Specification
Note 8: Definition of response time:
The output signals of BM-7 or equivalent are measured when the input signals are changed from “Black” to
“White” (falling time) and from “White” to “Black” (rising time), respectively. The response time interval between
the 10% and 90% of amplitudes. Refer to figure as below.
AU OPTRONICS CORPORATION
"Black"
100%
S i
90%
g n a l
(
R e
l
a t
i
v e
v a l
u
10%
e )
0%
Tr
Tf
"White""White"
B131HW02 V0 Document Version : 1.0
9 of 28
Product Specification
Note 9. Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and
180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90°
(θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is
AU OPTRONICS CORPORATION
typically perpendicular to the display surface with the screen rotated about its center to develop the desired
measurement viewing angle.
B131HW02 V0 Document Version : 1.0
10 of 28
Product Specification
3. Functional Block Diagram
The following diagram shows the functional block of the 13.1 inches wide Color TFT/LCD.
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 1.0
11 of 28
Product Specification
4. Absolute Maximum Ratings
An absolute maximum rating of the module is as following:
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit Conditions
AU OPTRONICS CORPORATION
Logic/LCD Drive Voltage
Vin -0.3 +3.0 [Volt] Note 1,2
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit Conditions
Operating Temperature
Operation Humidity HOP 10 90 [%RH] Note 4
Storage Temperature
Storage Humidity HST
Note 1: At Ta (25 )
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: LED specification refer to section 5.2
Note 4: For quality performance, please refer to IIS (Incoming Inspection Standard).
TOP 0 +50 [oC] Note 4
TST -20 +60 [oC] Note 4
10 90
[%RH]
Note 4
B131HW02 V0 Document Version : 1.0
12 of 28
Product Specification
Voltage
-
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows;
The power specification are measured under 25 and frame frenquency under 60Hz
Symble Parameter Min Typ Max Units Note
VDD Logic/LCD Drive
AU OPTRONICS CORPORATION
2.35 2.5 2.7 [Volt]
PDD VDD Power IDD IDD Current
Note 1 : Display pattern
Item Color
1. White
2 Yellow
3 Purple
4 Red
5 Light Blue
6 Green
7 Blue
1.13 1.38 [Watt] Note 1
- 450
550
[mA] Note 1
8 Black
B131HW02 V0 Document Version : 1.0
13 of 28
Product Specification
B
B
5.2 Backlight Unit
5.2.1 LED characteristics
Parameter guideline for LED driving is under stable conditions at 25 (Room Temperature):
Parameter Symbol Min.
AU OPTRONICS CORPORATION
Typ. Max.
Unit Condition
LED Operation Current IRLED 19
Light Bar Operation Voltage
(for reference)
BLU Power consumption (for reference)
LED life Time (Typical)
Note 1 : The value showed in the table is one light bar’s operation voltage.
Note 2: Calculator value for reference PLED = VF (Normal Distribution) * IF (Normal Distribution) / Efficiency
Note 3 : The LED life-time define as the estimated time to 50% degradation of initial luminous.
VLB - 31 34 [Volt]
PLED - -
N/A 10,000
- -
[mA]
4.56 [Watt]
Hour
Note 1
(Ta=25), Note 2
Vin =12V
(Ta=25), Note 3
IF=20 mA
6. Signal Interface Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1
1920
1st Line
1080th Line
R G B R
R G B R
R G B R G B
R G B R G B
B131HW02 V0 Document Version : 0.1
14 of 28
Product Specification
6.2 Integration Interface Requirement
6.2.1 Connector Description
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following components.
Connector Name / Designation For Signal Connector
Manufacturer I-PEX
AU OPTRONICS CORPORATION
Type / Part Number
Mating Housing/Part Number
6.2.2 Pin Assignment
CN1 INPUT SIGNAL (20461-030E-12 / I-PEX ) [ Mating Connector :20459-130T-10 / I-PEX ]
20461-030E-12
20459-130T-10
B131HW02 V0 Document Version : 0.1
15 of 28
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
16 of 28
6.3 Interface Timing
6.3.1 Timing diagram
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
17 of 28
6.3.2 Timing Specifications
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
18 of 28
Product Specification
6.4 Power ON/OFF Sequence
Power on/off sequence is as follows. Interface signals and LED on/off sequence are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
19 of 28
Product Specification
7. Panel Reliability Test
7.1 Reliability Test
This module is then tested in the following table.
However, this study will be conducted only one test item in the same module, multiple-item test
module to perform the same
AU OPTRONICS CORPORATION
湿() ±, 湿 ±,
.; LED
B131HW02 V0 Document Version : 0.1
20 of 28
Product Specification
8. Mechanical Characteristics
8.1 LCM Outline Dimension
8.1.1 Standard Front View
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
21 of 28
8.1.2 Standard Rear View
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
22 of 28
Product Specification
9. Shipping and Package
9.1 Shipping Label Format
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
23 of 28
9.2 Carton Package
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
24 of 28
Product Specification
9.3 Shipping Package of Palletizing Sequence
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
25 of 28
10. Appendix
10.1 EDID Description
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
26 of 28
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
27 of 28
Product Specification
AU OPTRONICS CORPORATION
B131HW02 V0 Document Version : 0.1
28 of 28
Loading...