AUO A201SN01 V3 Specification

Version

Spec. No. TVPM-A201SN01

:

Date :

3.0 3

6/18/’03

Version

©

Spec. No. TVPM-A201SN01

:

Date :

3.0 3

6/18/’03

Product Specification

20.1〞COLOR TFT-LCD MODULE

MODEL NAME: A201SN01 V.3

< >Preliminary Specification

< ◆ > Final Specification

Note: The content of this specification is subject to change.

A201SN01 V 3.03

Record of Revision

Version Revise Date Content

0 15/Dec./2001 First draft. 1 1 1/Apr./2002

1. Total pages 14?15

2. Overall dimension H : 345 ?347 D : 25 ? 23

3. Typical operation (Page 4) Symbol Min. Typ. Max.

Vcc 4.7?4.75 5.3?5.25

I A 700?800 800?1000

IRUSH TBD?1.5

4. Timing characteristic of input signal (Page 6)

Add H/V input mode

5. Black light unit (Page 7)

Symbol Min. Typ. Max.

VL 740?720 820?800 900?880

IL 5 ?4 6 ?5.5 PL 4.92?4.4X6 FL 50 ? 52

6. Optical specification (Page 8)

Symbol Min. Typ. Max.

Tr 4 ? 6 8 ?10

Tf 12 ? 16 24 ? 25 Wx 0.283?0.25 Wy 0.299?0.27

7. Driving condition for CCFL (Page 9)

0.313?0.28 0.343?0.31

0.329?0.30 0.359?0.33

I L : 6 ?5.5mA 50 ? 52KHz

8. Reliability test items (Page 10) High temp. storage 70?60 Thermal shock 70 ?60

9. Update outline dimension drawing (Page 12)

2/16

A201SN01 V 3.03

Version Date Content Remark

1.1

1.11

1.12

3.0

3.01

3.02

3.03

14 Aug.2002

30 Sep. 2002

7 Mar. 2003

10 Apr. 2003

22 Apr. 2003

23 May, 2003

18 Jun. 2003

CN1 (50P) connector: Compatible with Hirose FH12-50S-0.5SH Change

Update

Note6: Viewing Angle (CR ≧10)

Add

Color Saturation 70% NTSC Add ME Drawing Update Timing characteristics of input signals— DE mode and H/V

Change mode --Clock frequency max. Color chromaticity (CIE) Add Physical Specification Add and Update Brightness (center of screen) 500 (typ.) Changed Color Saturation 72% Changed

Note3: To be measured with a viewing cone of 1° by Topcon

Changed luminance meter ELDIM.

Packing Updated Surface treatment ? Hard Coating + LR Changed Response Time? 16ms Changed Color Chromaticity Changed Color Saturation ? 75% Changed Viewing Angle (CR ≧10)

Changed

Top 60 Bottom 60 Left 80

3. Electrical Characteristics (b) Display color v.s. input data

Right 80

Modify signals ? 256 gray scale Packing (4pcs/carton) Modify

3/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

Contents:

A. Physical specifications

B. Electrical specifications

1. Pin assignmen t.

2.Absolute maximum ratings

3. Electrical characteristics

a. Typical operating conditions.

b. Display color v. s. input data signals

c. Input signal timing

d. Display position

e. Backlight unit

C. Optical specifications

D. Reliability test items

E. Display quality

F. Handling precaution

G. Packing

Appendix:

Fig.1 LCM outline dimensions

Fig.2 Timing chart

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

4/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

A. Physical specifications

NO. Item Specification Remark

1 Display resolution(pixel) 800x3(H)×600(V) 2 Display Mode TN Type, Normally White + SWV Film

3 Active area (mm) 408(H)×306(V) 4 Screen size (inch) 20.1(Diagonal)

5 Pixel pitch (mm) 0.51(H)×0.51(V) 6 Color configuration R. G. B. Vertical stripe

7 Display Color 16.7M (8 bit) 8 Typical white Luminance 500 nit (typ.) 9 Color Gamut 75% typ. of NTSC coverage

10 Response Time 16ms typ. (Tr+Tf)

11 Electrical Interface TTL 1 port

12 Overall dimension (mm) 448(W)×347(H)×23(D) Note 1 13 Weight (g) 3500

14 Surface Treatment Hard Coating + LR

Note 1: Refer to Fig. 1.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

5/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

36

B. Electrical specifications

1.Pin assignment

P/N Symbol

1 NC 26 R0 Red Data 2 NC 27 GND Ground 3 NC 28 G7 4 GND Ground 29 G6 5 GND Ground 30 G5 6 VCC 31 G4 7 VCC 32 GND Ground 8 VCC 33 G3

Power Input (+5.0V)

9 VCC 10 GND 35 G1 11 HSYNC Horizontal Sync. 12 VSYNC Vertical Sync. 13 GND 38 B7 14 DE Data Enable 39 B6 15 GND 40 B5 16 DCLK Dot Clock 41 B4 17 GND Ground 42 GND Ground 18 R7 43 B3 19 R6 44 B2 20 R5 45 B1

Red Data (R7 :MSB)

21 R4 22 GND Ground 47 GND Ground 23 R3 48 GND Ground 24 R2 49 NC

Red Data

25 R1

Function P/N Symbol

34 G2

Active

G0

Low 37 GND Ground

46 B0

50 NC

Function

Green Data

Blue Data

CN1 (50P) connector: Compatible with Hirose FH12-50S-0.5SH

2. Absolute maximum ratings (GND = 0 V)

Parameter Symbol

Power voltage VCC -0.3 5.5 VDC At 25℃

Input signal voltage VLH -0.3 VCC+0.3 VDC At 25℃

Operating temperature Top 0 +50 ℃ Note 1

Storage temperature TST -20 +70 ℃ Note 1

Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40℃ or

less. At temperatures greater than 40℃, the wet bulb temperature must not exceed 39℃. When operate at low temperatures, the brightness of CCFL will drop and the lifetime of CCFL will be reduced.

Note 2: The unit should not be exposed to corrosive chemicals.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

Values

Min. Max.

Unit

Remark

6/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

Item

Symbol

Min.

Max.

Unit Remark

Caution

10

%

T2

T1

T5

T3

3. Electrical characteristics a. Typical operating conditions

Typ.

Power supply voltage

Internal

logic

Power ripple voltage

Input voltage VCC 4.75 5.0 5.25 V

Current

consumption

Inrush current I

Low voltage

High voltage

IA - 800 1000 mArms

- - 1.5 mApeak Note 2

RUSH

VIL 0 - 1.0 V

VIH 2.3 - 3.3 V

VRP - - 100 mVp-p

Note 1

Note 1:Effective value (mArms) at VCC = 5 V/25℃. Note 2: Refer to the following power-on condition.

Ton=470μs±10%

Sequence of Power-on/off and signal-on/off

Power

0ms≦T1＜70msec 0ms≦T2＜70msec 300msec≦T3 300msec≦T4

Input signal

T5≦10msec

Apply the lamp voltage within the LCD operating range. When the backlight turns on before the LCD operation or the LCD turns off before the backlight turns off, the display may momentarily become abnormal.

The above on/off sequence should be applied to avoid abnormal function in the display. In case of handling: Make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

7/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

0 0

1 1 1 0 0 0

1 1 1 0 0 1

0 1 1 0 1 0

1 0 1 0 0 0

0 0 0 0 0 0

0 0 0

0 0

0 0 0 0 0 0

1 1 1 0 0 0

1 1 1 0 0 1

0 1 1 0 1 0

1 0 1 0 0 0

0 0 0 0 0 0

0 0 0

0 0

0 0 0 0 0 0

1 1 1 0 0 0

1 1 1 0 0 1

0 1 1 0 1 0

1 0 1

b. Display color v.s. input data signals

Display colors

Basic

colors

Red

grayscale

Green

grayscale

Blue

grayscale

Black

Blue

Red

Magenta

Green

Cyan

Yellow

White Black

Dark

↑ ↓

bright

Red

Black

Dark

↑ ↓

bright

Green

Black

Dark

↑ ↓

bright

Blue

R7 R6 R5

0

Data signal (0 : Low level, 1: High level)

Note: Each basic color can be displayed in256 gray scales using the 8 bit data signals. By combining the 24-bit data signals(R, G, B), the 16777216 colors can be achieved on the display.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

8/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

After falling edge of Hsync, counting 218

clk, then getting valid data from 219th clk’s

alling edge of Vsync, counting 25 Th,

c. Input signal timing

Timing diagrams of input signal are shown in Fig 2. (1). Timing characteristics of input signals

DE mode

Item Symbol

Clock frequency Fck 38 40 50 MHz

Horizontal blanking Thb1 235 256 500 Clk

Horizontal display period Thd - 800 - Clk

Horizontal sync. period Th 1035 1056 1300 Clk

Vertical frequency - 46 60 76 Hz

Vertical blanking Tvb1 10 28 150 Th

Vertical display width Tvd - 600 - Th

Vertical sync. period Tv 610 628 750 Th

Min. Typ. Max. Unit

H/V mode

Item Symbol

Clock frequency Fck 38 40 50 MHz

Horizontal display period Thd 1030 1056 1300 Clk

Hsync pulse width Thw 5 128 - Clk

Hsync front porch Thf 10 40 - Clk

Hsync back porch Thb 8 88 - Clk

Hsync width+back porch Thw+Thb

Min. Typ. Max. Unit

80 - Thd-810 Clk

Remark

Hsync blanking Thb1 230 256 500- Clk

Vsync period Tv 610 628 650 Th

Vsync width Tvw 2 4 - Th

Vsync front porch Tvf 0 1 - Th

Vsync blanking Tvb1 10 28 50 Th

Hsync/Vsync phase shift Tvpd 2 320 - Clk

Item Symbol Value Unit

Horizontal display start The 218 Clk

Vertical display start Tve 25 Th

data. After f

then getting 26th Th’s data.

Description

Note 1:Clock falling edge latch the data. Note 2:H/V is negative polarity.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

9/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

(1). The area under the positive and negative cycles of the waveform of the lamp

(4). Lamp current should not exceed the maximum value within the operating

d. Display position

D( 1,1 ) D( 2,1 ) …… D( X,1 ) …… D( 799,1 ) D( 800,1 ) D( 1,2 ) D( 2,2 ) …… D( X,2 ) …… D( 799,2 ) D( 800,2 )

.

D( 1,Y ) D( 2,Y ) …… D( X,Y ) …… D( 799,Y ) D( 800,Y )

.

D( 1,599 ) D( 2,599 ) …… D( X,599 ) …… D( 799,599) D( 800,599 ) D( 1,600 ) D( 2,600 ) …… D( X,600 ) …… D( 799,600) D( 800,600)

……

.

. .

.

……

.

. .

.

. .

.

e.Backlight unit The backlight system is an edge-lighting type with a CCFT(Cold Cathode Fluorescent Tube). The characteristics of a single lamp are shown in the following tables.

Parameter Symbol

Lamp voltage VL 720 800 880 Vrms Note 1 Lamp current Power consumption

Lamp starting voltage VS

Frequency FL 40 52 60 KHZ Note 4 Lamp life time LL 50000 - - Hr Note 1, 5

IL 4 5.5 7 mArms

PL - 4.4x6 - W Note 2

Min. Typ. Max. Unit Remark

- - 1500(T=0 ℃)

Vrms Note 3

- - 1150(T=25℃)

Note 1: T= 25℃ Note 2: Inverter should be designed with the characteristic of lamp. When you are designing

the inverter, the output voltage of the inverter should comply with the following conditions.

current and lamp voltage should be area symmetric (the symmetric ratio should

be larger than 90%). (2). There should not be any spikes in the waveform. (3). The waveform should be sine wave as possible.

temperature (It is prohibited to over the maximum lamp current even if operated

in the non-guaranteed temperature). When lamp current over the maximum

value for a long time, it may cause fire. Therefore, it is recommend that the

inverter should have the current limited circuit. Note 3: The inverter open voltage should be designed larger than the lamp starting voltage at

T=0oC, otherwise backlight may be blinking for a moment after turning on or not be able to turn on. The open voltage should be measured after ballast capacitor. If an inverter has shutdown function it should keep its open voltage for longer than 1 second even if lamp connector is open.

Note 4: Lamp frequency may produce interference with horizontal synchronous frequency

and this may cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.

Note 5: Brightness (IL= 6mA) to be decrease to the 50% of the initial value.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

Note 1

10/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

-

Note 6: CN2 connector (backlight): BHSR-02VS-1 (JST) Mating connector: SM02B-BHS-1-TB (JST)

Pin no. Symbol Function Remark

1 H CCFL power supply (H.V.) Cable color: Pink (central); Dark Gray others)

2 L CCFL power supply (GND) Cable color: White

C. Optical specifications ( Note 1, Note 2 )

Specification

Min. Typ. Max.

-

5 1 1

-

Unit Remark

ms Note 4

Response time Rising time Falling time

Item Symbol Condition

Tr

Tf

θ=0°

Contrast ratio(center of screen) CR Viewing angle

Top Bottom Left Right

Brightness(center of screen) Y

Wx 0.26 0.29

Color chromaticity(CIE)

Wy 0.28 0.31

θ=0°

L

CR≧10

CR≧5

θ=0°

400 500

60 60 80 80

80 80 80 80

400 500 - nit Note 3,6

-

Rx 0.62 0.65 Ry 0.30 0.33 Gx 0.25 0.28

-

0.32

0.34

0.68

0.36

0.31

Note 3,5

Deg.

Note 3,5,7

Note 3

Gy 0.58 0.61 Bx 0.11 0.14 By

Color Saturation (NTSC) 75 %

White uniformity

δW

70 - - % Note 3,8

0.04 0.07

0.64

0.17

0.10

Note 1: Ambient temperature = 25℃. Note 2: To be measured in dark room after backlight warm up 30 minutes. Note 3: To be measured with a viewing cone of 1°by Topcon luminance meter ELDIM EZContrast

160D.

Note 4: Definition of response time:

The output signals of BM-7 are measured when the input signals are changed from

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

11/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

Contrast ratio (CR)=

Brightness on the "white" state

Brightness on the "black" state

δ

Minimum Brightness of nine points

Maximum Brightness of nine points

“Black” to “White” (falling time) and from “White” to “Black” (rising time), respectively. The response time interval between the 10% and 90% of amplitudes. Refer to figure as below.

"Black"

100%

Signal(Relative value)

90%

10%

0 %

Tr Tf

Note 5. Definition of contrast ratio:

Contrast ratio is calculated with the following formula.

Note 6: Driving conditions for CCFL: IL= 5.5 mA, 52KHz Frequency.

Note 7: Definition of viewing angle:

"White""White"

Note 8: Definition of white uniformity:

White uniformity is calculated with the following formula. Luminance are measured at the following nine points (1~9).

θ

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

12/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

Test tem

Test Condition

Remark

6 7 8 9 3

Unit : mm

1 2

4 5

D. Reliability test items (Note 1)

High temperature storage

60℃, 240Hrs

Note 1, 2, 3

Low temperature storage

High temperature & high

humidity operation

High temperature operation

Low temperature operation

Temperature cycling

(non-operation)

Electrostatic discharge

(non-operation)

Vibration

(non-operation)

Mechanical shock

(non-operation)

-20℃, 240Hrs 40℃, 90%RH, 240Hrs

(No condensation) 50℃, 240Hrs

0℃, 240Hrs

-20℃~60℃ 1H, 10mins, 1H, 5cycles

150 pF,150Ω,10kV,1 second, 9 position on the panel, 10 times each place

Sweep:1G, 10HZ ~ 500HZ ~ 10HZ /2.5min 2 hours for each direction X, Y, Z (6 Hrs in total)

50G/11ms, 200G/2ms, ±X, ±Y, ±Z once for each direction

Note 1, 2, 3

Note 3

Note 1, 2, 3

Note 1: Evaluation should be tested after storage at room temperature for one hour.

Note 2: There should be no change which might affect the practical display function when the

display quality test is conducted under normal operating condition.

Note 3: Judgment: 1.Function OK.

2.No serious image quality degradation.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

13/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

E. Display quality

The display quality of the color TFT-LCD module should be in compliance with the AUO’s OQC inspection standard.

F. Handling precaution

The Handling of the TFT -LCD should be in compliance with the AUO’s handling principle standard.

G. Packing:

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

14/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

Fig.1 LCM outline dimension

15/16

A201SN01 V.3.03 Spec. No. TVPM-A201SN01

Th

(1 pixel / clock)

invalid

Invalid

800,Y

X,600

X,599

X,3

X,2

X,1

Tvd

Tv

799,Y

3,Y

2,Y

1,Y

Thd

Tv

Fig.2 Timing chart

Invalid

X,600

X,599

RGB

Tvbl

DE

Fck

CLK

invalid

800,Y

RGB

Thbl

DE

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.

16/16

AUO A201SN01 V3 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual