auna 10008978, AV2-CD508BT, 10008979, 10008980, 10004933 Instruction Manual

...
Page 1
AV2-CD508
AV2-CD508BT
Hi-Fi-Verstärker
Hi-Fi Amplifier
10008978 10008979
10008980 10004933
www.auna-multimedia.com
Page 2
Page 3
Sehr geehrter Kunde,
wir gratulieren Ihnen zum Erwerb Ihres Gerätes. Lesen Sie die folgenden Hinweise sorgfältig durch und befolgen Sie diese, um möglichen Schäden vorzubeugen. Für Schäden, die durch Missachtung der Hinweise und unsachgemäßen Gebrauch entstehen, übernehmen wir keine Haftung. Scannen Sie den
folgenden QR-Code, um Zugri auf die aktuellste
Bedienungsanleitung und weitere Informationen rund um das Produkt zu erhalten:
INHALTSVERZEICHNIS
DE
Sicherheitshinweise 4 Geräteübersicht 4 Anschlüsse 6 Bedienung und Funktionen 8 Fehlersuche und Fehlerbehebung 9 Hinweise zur Entsorgung 10
TECHNISCHE DATEN
Artikelnummer 10008978, 10008979, 10008980, 10004933
Stromversorgung 220-240 V ~ 50/60 Hz
KONFORMITÄTSERKLÄRUNG
Hersteller:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Deutschland.
Dieses Produkt entspricht den folgenden Europäischen Richtlinien:
2011/65/EU (RoHS) 2014/53/EU (RED)
Die vollständige Konformitätserklärung des
Herstellers nden Sie unter folgendem Link:
https://use.berlin/10008978
English 11
Español Français Italiano
Page 4
DE
SICHERHEITSHINWEISE
1. Wählen Sie einen sicheren Standort aus und stellen Sie das Gerät nicht in direktes Sonnenlicht oder neben eine Wärmequelle.
2. Vermeiden Sie Umgebungen, an denen das Gerät Vibrationen, übermäßigem Staub, Kälte oder Feuchtigkeit ausgesetzt ist.
3. Um Stromschläge zu vermeiden, darf das Gehäuse nicht geönet
werden. Sollte ein Fremdkörper versehentlich in das Innere des Gerätes gelangen, wenden Sie sich bitte an einen Fachhändler.
4. Reinigen Sie das Gerät nicht mit chemischen Lösemitteln, da diese
die Oberäche beschädigen könnte. Benutzen Sie zur Reinigung ein
sauberes, trockenes Tuch.
5. Bewahren Sie dieses Handbuch zur späteren Verwendung auf.
GERÄTEÜBERSICHT
4
Page 5
Vorderseite
1
Standby-Modus Bluetooth-Modus
2
Sender/Empfänger
3
Lautstärkeregler
4
CD-Modus
5
DVD-Modus
6
AUX-Modus
8
Bassregler
9
Höhenregler
10
Balanceregler
11
Kopfhörer-Anschluss
Rückseite
DE
1
Frontlautsprecher Rechts
2
Frontlautsprecher Links
3
REC-Anschluss
4
AUX-Anschluss
Fernbedienung
5
DVD-Anschluss
6
CD-Audio-Anschluss
7
Netzschlater
8
Stromanschluss
1 StandBy-Modus 2 Eingangsquelle 3 CD-Fach önen/
schließen 4 Nummerntasten 5 Stereo/Mono 6 Kanal vor 7 Rücklauf/Frequenz
zurück 8 Stop 9 USB-Modus 10 Kanal zurück 11 Vorheriger Titel 12 Lautstärke + 13 Eingang 14 Lautstärke ­15 Ton aus 16 Nächster Titel 17 AUTO 18 Vorlauf/Frequenz vor 19 A-B 20 Speicher 21 Wiedergabe/Pause
5
Page 6
DE
ANSCHLÜSSE
Systemanschluss
1. Schließen Sie nur neue Komponenten und die anderen Elemente des Gerätes an, wenn das Gerät abgeschaltet ist.
2. Die Lautsprecherkabel sollen den Farben entsprechend und fest angeschlossen werden.
Anschlussdiagramm für die Eingangsquellen
6
Page 7
Anschlussdiagramm Lautsprecher
• Stellen Sie bitte sicher, dass die blanken Kabel sich gegenseitig nicht berühren und nicht mit den Metallteilen des Gehäuses in Kontakt kommen. Diese könnte das Gerät oder die Lautsprecher beschädigen.
• Bitte beachten Sie die Polarität der Lautsprecherkabel. Schließen sie immer „+“ zu „+“ und „-“ zu „-“ an.
DE
7
Page 8
DE
BEDIENUNG UND FUNKTIONEN
Normal-Funktion
1. Trennen Sie das Gerät vom Strom und verbinden Sie das Quellgerät mit den Eingängen des Gerätes.
2. Schalten Sie das Gerät ein und warten 3-4 Sek. Wählen Sie anschließend die gewünschte Musikquelle aus.
3. Stellen Sie die Lautstärke am Gerät oder über die Fernbedienung ein.
4. Mit den drei EQ-Reglern (Treble/Bass/) können Sie das Frequenzspektrum entsprechend Ihren Hörgewohnheiten anpassen.
5. „Ton aus“ können Sie über MUTE aus- und einschalten.
BT-Verbindung (nur 10008978 und 10008979)
1. Trennen Sie alle Bluetooth-Verbindungen, die mit dem Verstärker vorher verbunden waren.
2. Schalten Sie die Bluetooth-Funktion Ihres Bluetooth Gerätes ein.
3. Schalten Sie den Verstärker ein und wählen Sie den Bluetooth-Modus.
4. Aktualisieren Sie die Geräteliste in Ihrem Bluetooth-Gerät.
5. Wählen Sie den Gerätenamen „CD508-BT“ aus.
6. Wenn ein Passwort verlangt, wird benutzen Sie bitte „0000“
8
Page 9
FEHLERSUCHE UND FEHLERBEHEBUNG
Problem Mögliche Ursache Lösungsansatz
Die Anzeige leuchtet nicht und es kommt kein Tonsignal aus den Lautsprechern.
Die Anzeige leuchtet aber es kommt kein Tonsignal aus den Lautsprechern.
Das Signal kommt nur aus einem Lautsprecher.
Der Stereoklang ist verfälscht (Links /Rechts vertauscht, der Ton schein aus der Ferne zu kommen.)
Die Fernbedienung funktioniert nicht richtig.
Der Netzstecker ist nicht richtig angeschlossen.
Die Lautsprecher sind nicht richtig verbunden.
Der Lautstärkeregler steht auf Minimum.
Die Verbindung der Lautsprecher ist unterbrochen.
Die Kabelverbindung der Eingangsquelle ist unterbrochen.
Balance-Regler ist nicht richtig eingestellt.
Problem mit der Polarität. Überprüfen Sie ob die
Die Batterie ist leer. Ersetzen Sie die Batterie
Die Batterie ist nicht richtig eingesetzt.
Die Fernbedienung ist zu weit vom Gerät entfernt.
Hindernisse im Weg Entfernen Sie die
Falsche Taste gedrückt. Benutzen Sie die richtige
Überprüfen Sie das Kabel und die Verbindung.
Überprüfen Sie das Kabel und die Verbindung der Lautsprecher.
Benutzen Sie den Lautstärkeregler.
Überprüfen Sie das Kabel und die Verbindung der Lautsprecher.
Überprüfen Sie die Kabelverbindung der Eingangsquelle.
Überprüfen Sie die Balance-Regler­Einstellung.
Lautsprecher und die Eingangskanäle richtig angeschlossen sind. Verbinden Sie (+) mit (+) und (-) mit (-).
Setzen Sie die Batterie richtig ein.
Verringern Sie den Abstand.
Hindernisse.
Taste.
DE
9
Page 10
DE
HINWEISE ZUR ENTSORGUNG
Bendet sich die linke Abbildung (durchgestrichene
Mülltonne auf Rädern) auf dem Produkt, gilt die Europäische Richtlinie 2012/19/EU. Diese Produkte dürfen nicht mit dem normalen Hausmüll entsorgt werden. Informieren Sie sich über die örtlichen Regelungen zur getrennten Sammlung elektrischer und elektronischer Gerätschaften. Richten Sie sich nach den örtlichen Regelungen und entsorgen Sie Altgeräte nicht über den Hausmüll. Durch die regelkonforme Entsorgung der Altgeräte werden Umwelt und die Gesundheit ihrer Mitmenschen vor möglichen negativen Konsequenzen geschützt.
Materialrecycling hilft, den Verbrauch von Rohstoen
zu verringern.
Das Produkt enthält Batterien, die der Europäischen Richtlinie 2006/66/EG unterliegen und nicht mit dem normalen Hausmüll entsorgt werden dürfen. Bitte informieren Sie sich über die örtlichen Bestimmun­gen zu gesonderten Entsorgung von Batterien. Durch regelkonforme Entsorgung schützen Sie die Umwelt und die Gesundheit ihrer Mitmen-schen vor negativen Konsequenzen.
10
Page 11
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual is not covered by our warranty and any liability. Scan the QR code to get access to the latest user mannual and other information about the product:
CONTENT
Safety Instructions 12 Product Overview 12 Connections 14 Operation and Functions 16 Troubleshooting 17 Hints on Disposal 18
TECHNICAL DATA
Item number 10008978, 10008979, 10008980, 10004933
Power supply 220-240 V ~ 50/60 Hz
EN
DECLARATION OF CONFORMITY
Producer:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2011/65/EU (RoHS) 2014/53/EU (RED)
The complete declaration of conformity of the manufacturer can be found at the following link: https://use.berlin/10008978
11
Page 12
EN
SAFETY INSTRUCTIONS
1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source.
2. Avoid environments subject to vibration, excessive dust, cold or moisture.
3. Due to the risk of electrical shock, do not open the cabinet. Should
a foreign object accidentally nd its way into the interior of the unit,
contact your local dealer.
4. Do not attempt to clean the unit with chemical solvents as this might
damage the nishing. A clean, dry cloth is recommended for cleaning.
5. Keep this manual for future reference.
PRODUCT OVERVIEW
12
Page 13
Front
EN
1
Standy/On Switch
2
Receiver Singal Head
3
Volume
4
CD input mode.
5
DVD input mode.
6
Selects AUX input mode.
Rear
1
Front speaker (right)
2
Front speaker (left)
3
REC/audio output jack
4
AUX/audio input jack
Remote Control
7
BT input mode.
8
Adjust the bass volume
9
Adjust the treble volume
10
Adjust the balance volume
11
Headphone plug
5
DVD audio input jack
6
CD audio input jack
7
Power switch
8
AC input
1 Standby 2 Source 3 Open/Close 4 Number Button 5 Stereo/Mono 6 Channel+ 7 B.ward/Tuning­8 Stop 9 USB 10 Channel­11 Previous 12 Volume+ 13 Input 14 Volume­15 Mute 16 Next 17 Auto 18 F.ward/Tuning+ 19 A-B 20 Memory 21 Repeat 22 Play/Pause
13
Page 14
EN
CONNECTIONS
System Connection
• Do not let the bare speaker wires touch each other or any other metal parts as this could damage this unit or speakers.
• Make sure the polarity of speaker wires is correct, ‚+‘to ‚+‘ , and ‚-‘to ‚-‘, if these wires are incorrectly connected, the sound will be unnatural.
Scheme of Input Connection
14
Page 15
Speaker Connection
• Do not let the bare speaker wires touch each other or any other metal parts as this could damage this unit or speakers.
• Make sure the polarity of speaker wires is correct, ‚+‘to ‚+‘ , and ‚-‘to ‚-‘, if these wires are incorrectly connected, the sound will be unnatural.
EN
15
Page 16
EN
OPERATION AND FUNCTIONS
Normal-Funktion
1. Select audio source by pressing the INPUT key on the front panel or the DVD,AUX,CD,BLUETOOTH on the remote control.
2. Adjust the knob VOLUME on the front panel or the key VOL+/- on the remote control to adjust the setting of the main volume control to your listening level.
3. Press the TREBLE key on the front panel to increase or decrease music
treble eect. Press the BASS key on the front panel to increase or decrease music bass eect. Press the BALANCE key on the front panel to increase or decrease music balance eect.
4. Press the MUTE key on the remote control to mute, press it again to reset.
BT Connection (only 10008978 and 10008979)
1 Turn o any Bluetooth devices previously paired (linked) with this unit. 2 Turn on the Bluetooth features on your phone or music player. 3 Turn on and set this unit in the Bluetooth mode. 4 Set your phone or music players to search for Bluetooth devices. 5 Select CD508-BT from search results on your phone or music player. 6 Select OK or Yes to pair this unit with your phone or music player. 7 If protected, enter 0000 for passkey.
16
Page 17
TROUBLESHOOTING
Problem Possible Cause Suggested Solution
The indicator is not lit and there is no sound coming from the speakers.
The indicator is lit but there is no sound from the speakers.
No sound from Centre channel.
The stereo sound is distorted (left / right reversed, the sound seems to come from a distance).
The remote control does not work properly.
The mains plug is not connected correctly.
The speakers are not connected properly.
The volume control is set to minimum.
The speaker connection is disconnected.
The cable connection of the input source is interrupted.
Balance control is not set correctly.
Polarity problem. Check that the speakers
The battery is empty. Replace the battery.
The battery is not inserted correctly.
The remote control is too far away from the unit.
Obstacles in the way Remove the obstacles.
Wrong key pressed. Use the correct button.
Check the cable and connection.
Check the cable and connection of the speakers.
Use the volume control.
Check the cable and con­nection of the speakers.
Check the cable connec­tion of the input source.
Check the balance control setting.
and input channels are properly connected. Connect (+) to (+) and (-) to (-).
Insert the battery correctly.
Reduce the distance.
EN
17
Page 18
EN
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/ EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailled information about recycling of this product, please contact your local council or your household waste disposal service.
Your product contains batteries covered by the European Directive. 2006/66/EC, which cannot be dis-posed of with normal household waste. Please check local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative conse-quences on the environment and human health.
18
Page 19
Page 20
Loading...