
查询SRC1202K供应商
SRC1202
SSeemmiiccoonndduuccttoorr
Descriptions
• Switching application
• Interface circuit and driver circuit application
Features
• With built-in bias resistors
• Simplify circuit design
• Reduce a quantity of parts and manufacturing process
• High packing density
Ordering Information
Type NO. Marking Package Code
SRC1202K R2 SOT-623F
NPN Silicon Transistor
Outline Dimensions unit : mm
1.30~1.50
0.90 Typ.
0.55~0.65
1.10~1.30
0.70~0.90
1
0.25 Max.
• Equivalent Circuit
OUT
IN
R1
R
2
COMMON
R1 R2
10KΩ 10KΩ
0.10 Max.
0.16 Max.
KSR-4064-001
PIN Connections
1. IN
2. COMMON
3. OUT
1

SRC1202
Absolute Maximum Ratings (Ta=25°C)
Characteristic Symbol Rating Unit
Output voltage VO 50 V
Input voltage VI 30,-10 V
Output current IO 100 mA
Power dissipation PD 100 mW
Junction temperature TJ 150
Storage temperature range T
-55 ~ 150
stg
Electrical Characteristics (Ta=25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Output cut-off current I
DC current gain GI VO=5V, IO=10mA 50 80 - -
Output voltage V
Input voltage (ON) V
Input voltage (OFF) V
Transition frequency
Input current II V
Input resistor (Input to base) R1 - 7 10 13
Input resistor (Base to common) R2 - 7 10 13
VO=50V, VI=0 - - 500 nA
O(OFF)
IO=10mA, II=0.5mA - 0.1 0.3 V
O(ON)
VO=0.2V, IO=5mA - 1.8 2.4 V
I(ON)
VO=5V, IO=0.1mA 1.0 1.2 - V
I(OFF)
*
f
T
=10V, IO=5mA, f=1MHz - 200 - MHz
V
O
=5V, IO=0 - - 0.88 mA
I
°C
°C
KΩ
KΩ
* : Characteristic of transistor only
KSR-4064-001
2

Electrical Characteristic Curves
SRC1202
Fig. 1 IO - V
Fig. 3 GI - IO
I(ON
Fig. 2 I
㎂
O
- V
I(OFF)
The AUK Corp. products are intended for the use as components in general electronic equipment
(Office and communication equipment, measuring equipment, home appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products in equipments
which require high quality and / or reliability, and in equipments which could have major impact to the
welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all
types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case
these AUK Corp. products were used in the mentioned equipments without prior consultation with AU
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSR-4064-001
3