Page 1
ASSEMBLY INSTRUCTIONS
1. CAREFULLY UNPACK AND PLACE ALL PARTS
ON A SMOOTH SURFACE AND LAY THEM UP AS
PER SKETCH.
2. SCREW THE TUBE (B), TUBE (C) ,TUBE(D),TUBE(E),
SOCKET PART (F) INTO BASE (A) IN TURN.
3. PUT THE HARP (G) INTO THE SADDLE OF SOCKER
PART (F).
4. PUT SHADE(NOT INCLUDED) ONTO THE HARP (G)
AND THEN SCREW THE FINIAL (H) TO TIGHTEN.
6. INSERT THE POLARIZED PLUG INTO OUTLET,
TURN ON THE SWITCH AND ENJOY YOUR LAMP.
WATTAGE: 100W TYPE A (EX BULB)
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE
OTHER) AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL
FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE
OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT
A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS THE
PLUG CAN BE FULLY INSERTED. DO NOT ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Loading...