August EP615 User Manual

August International Ltd

United Kingdom

Telephone: [phone]

www.a ug us ti nt .c om

E

cou

teu

rs St

é

réo

B

l

u

e

too

th

C

uff

i

e

S

t

e

reo

Blu

e

too

th

B

lue

t

oot

h

St

e

reo

Kop

f

hör

e

r

Aur

i

cul

a

r

e

s Blu

e

t

o

ot

h Es

té

r

e

o

B

l

uet

o

ot

h

Ste

r

eo Hea

d

set

EP

615

EN

FR

DE

IT

ES

User Manual

Thank you for purchasing the August EP615
Bluetooth Stereo Headset. This user manual is
designed to familiarize you with all the features
of this device. Please take the time to read this
user manual carefully, even if you are already
familiar with a similar product.

Safety

To ensure the safety of you and others, please read
the Safety Instructions before using this device.

Please do not disassemble the EP615, it can be
unsafe and will invalidate the manufacturer's
warranty.

Disposal

Please ensure the product and accessories are
disposed of in compliance with the WEEE (Waste
Electrical and Electronic Equipment) Directive
and any other regulations applicable to your
country.

Always check with the environment agency and
any other relevant authorities for current disposal
regulations.

Customer Service

You can contact us by phone on: [phone]
0586 or by email at: [e-mail]
should you require further technical support or
customer service.

English

Storage and Use

Never expose
the
to moisture,
dust, oil or
smoke.

device

When carrying
this device as
part of your
luggage please
ensure it is
securely stored
to avoid
impact damage.

Keep this
device away
from
extreme
temperatures.

1. Safety Instructions

Maintenance

Please unplug all leads before cleaning this device.

Wipe the
device and
buttons with
a soft cloth.

Never wipe this
device with an
abrasive cloth
or apply
detergent,
alcohol or
chemical based
cleaning
products.

-1-

Alcoh ol

Never strike
or scratch this
device with
any sharp
object.

Keep the
device away
from wet or
damp
environment.

Avoid
dropping or
exposing to
impacts.

5. Operation

5.1 Switch On / Off

To switch on the device, press and hold the
button for 2 seconds.

To switch off the device, press and hold the
button for 3 seconds. The status LED will flash
red then turn off.

5.2 Bluetooth Connections

Turn the device on, The EP615 will automatically
reconnect to the last paired Bluetooth device if it
is in range.

To connect to a new device, first ensure the
EP615 is switched off, then press and hold the

button until the LED flashes red and blue

(approx. 4 seconds). To connect to a new device,

please disconnect the current Bluetooth
connection to the EP615 on your device.

- For mobile phones

1) Scan for available Bluetooth devices on your
mobile phone (see your mobile phone user
manual for instructions if needed)

2) Select “EP615” from the available devices and
confirm connection.

3) The status LED flashes blue to indicate a
successful connection.

Note:

Accessing Bluetooth settings on mobile phones
varies for each phone, to find the information for
your phone, please refer to its user manual.

-2-

-3-

English

2. Main Features

Integrated Microphone for Hands Free Calls
Built-in Rechargeable Battery
Range: up to 10m (Class II)
Bluetooth Version: Bluetooth V4.0

3. Accessories

1) USB charging cable

2) User manual

4. Part Names and Functions

Micro USB charging port

Wireless Headphones for Bluetooth Devices

1) Volume Up/Previous Track

2) Volume Down/Next Track

3) Status LED

4) Power / Play/ Pause/ Answer

5) Microphone

6) Power Socket

7) NFC

V

+

V

-

1
2

3
4
5

6

7

-4-

-5-

English

- For computers

1) Enable the Bluetooth function on your computer.

2) Select “Devices and Printers” from the Control
Panel and click “Add a Device”.

3) Select “EP615” from the available devices, the
system will install the driver automatically.

Bluetooth driver is needed (not included).

4) The status LED flashes blue to indicate a
successful connection.

5) If the EP615 is not automatically set as your
output device, select “Sound” from the control
panel then highlight the EP615 and select “Set
Default”.

Note: When switched on, the EP615 will
automatically reconnect to the last paired
Bluetooth device if it is in range.

- NFC

1) Enable Bluetooth and NFC on your source
device.

2) Touch the NFC area of your source device
against the NFC area on the left side of the
EP615. They will automatically pair with each
other.

3) Confirm Bluetooth pairing if prompted.
“EP615” will now be listed in your source
device’s Bluetooth device list.

4) To disconnect your device, touch the NFC area
of your device against the NFC area on the left
side of the EP615.

Note: The first time you pair the EP615 through

Note: For Windows XP and Vista, a third-party

NFC, you will need to tap twice. Once to turn the
headphones on and once to pair.

5.3 Remote Control

The EP615 is able to control the music playing on
either a mobile phone or a computer with a
Bluetooth connection.

Press “ ” to pause or resume playing music.
Press and hold “ ” or “ ” to increase or
decrease the volume.
Press “ ” or “ ” to select the previous or
next track.

Note: Music playing control is only compatible
with devices that support A2DP, please refer to
your devices user manual for its A2DP
compatibility.

5.4 Hands-free Calling

Whilst connected to your mobile phone, the
EP615 will act as a hands-free system for calls.

Press to pick up or hang up a call. Press and
hold for 2 seconds to reject the incoming call.
Press twice to dial last dialled number.

During a call, you can mute your caller. Press and
hold for until a beep sounds to enter mute
mode; press and hold again, after the beep the
call is un-muted.

6. Charging

When the power is low, the LED flashes red.
To charge the EP615, connect the micro USB lead
to the device’s power socket, and the other end of
the USB cable to a powered USB port.

V+ V-

V+ V-

-6-

-7-

English

The status LED lights red whilst charging and
lights blue once the battery is fully charged.

Note:

1) Only use USB power plugs that have been
properly certified.

2) Make sure that the headphone is fully charged
for at least 6 hours for before first use.

3) The headphones must be fully charged before
use if they have been unused for longer than 1
year.

8. Troubleshooting

Update the driver of the Bluetooth
module on your computer.

Problem

Won't turn on

Can't find the
EP615

Can't install the
driver for EP615

Solution

Please charge the EP615.

Confirm EP615 is in pairing status
and within 10 meters from the device.

The sound quality
is intermittent in
Bluetooth mode

Disable the Wi-Fi on your
source device.

No sound

Check the volume on both source
device and EP615.

43g

7. Specification

48 x 58mm
Neck Band Length: 335mm

,

Bluetooth V4.0 + NFC

Up to 10m

20Hz – 20KHz

10mW

93.2db±3dB

≤0.3%

3.7V/130mah Built-in Li
Polyme Battery

8 Hours

3 Hours

135 Hours

Bluetooth Specification

Operating Range

Frequency Response

Speaker Output

SNR

Distortion

Battery

Working Time

Charging Time

Standby Time

Weight

Dimensions

Can't connect to
Bluetooth on
Windows XP
or Vista

Third party software may be required,
please contact the manufacturer of
your Bluetooth chip for more
information.

Can't connect to
Bluetooth in
Windows 7+

Download all updates for Windows
and your Bluetooth driver, these may
need to be manually downloaded from
the Bluetooth chips manufacturers
website.

9. Warranty

This product is guaranteed for twelve months from
the date of the original purchase. In the unlikely
event of any defect arising due to faulty materials
or workmanship, the unit will be either replaced or
repaired free of charge (where possible) during this
period. An alternative product will be offered in
case the product is no longer available or
repairable.

This warranty is subject to the following
conditions:

where the product is purchased.

The product must be correctly installed and
operated in accordance to the instructions given
in this user manual.

The product must be used solely for domestic
purposes.

The warranty only covers the main unit, and
does not cover the accessories.

The warranty does not cover the damage caused
by misuse, negligence, accident and natural
disaster.

The warranty will be rendered invalid if the
product is resold or has been damaged by
inexpert repairs. The manufactures disclaim any
liability for incidental or consequential damages.

Please consult our customer adviser before
returning any product; we are not responsible for
any unexpected product returns.

The warranty is only valid within the country

in the original packaging with all the
accessories and the original copy of the
purchase receipt.

The warranty is in addition to, and does not
diminish, your statutory or legal rights.

Customer Service:

Telephone: [phone]
Email: [e-mail]

Any faulty product must be kept and returned

-8-

-9-

English