August DA100D User Manual

DA100D

August International Ltd

United Kingdom

Tel:[phone]

www.augustint.com

EN

FR

DE

IT

ES

10.1" HD DIGITAL / ANALOGUE TV & MULTIMEDIA PLAYER

TV TNT HD / ANALOGUE 10.1” & LECTEUR MULTIMEDIA

TNT HD 10.1" DIGITAL / ANALOG TV & MEDIA PLAYER

TV TDT HD / ANALOGICA 10.1" & LETTORE MULTIMEDIALE
TV 10.1" HD TDT / ANALÓGICA Y LECTOR MULTIMEDIA

User Manual

Thank you for buying our August TV. Please take time to read these
instructions carefully. It is designed to familiarise you with the product's
many features and to ensure that you get the very best from your
purchase.

Safety

To ensure your safety and the safety of others, please ensure you read the
Safety Instructions before you use this product.

Disposal

Please ensure the product and its accessories are disposed of in
compliance with the WEEE (Waste Electrical and Electronic Equipment)
Directive and other regulations. Please check with your local authority for
disposal regulations.

Declaration of Conformity

The Declaration of Conformity can be found on our website at
http://augustint.com/en/declaration/

English

Customer Service

If you need help, please contact our Customer Service:
Telephone: [phone]
Email: [e-mail]

1. Safety Instructions

Storage and Use

Do not expose
this device to
extreme
temperatur es .
Operating
temperatur e
range: 0°C to
50°C Storage
temperatur e:

-10°C to 60°C.

Never expose
this TV s et to
moisture, du st ,
oil or smoke.

Always secur e
this device
during
transport.

Keep this TV
set away from
water or damp
environmen ts .

Never drop or
expose this
device to
impact.

Never strike
this TV s et or
scratch with
sharp object s.

Precautions

1. Use only the supplied power adaptor, failure to do so can damage the device and
may cause personal injury.

2. When the device is not in use, turn off the AC adaptor or remove the car
power adaptor from the 12V socket.

Warning

Do not watch this TV whilst driving.

Special Notice

There may be a few highlights or dark spots visible on the LCD screen. This
is a very common property of active matrix display technology and does not
indicate a defect or fault.

Never try to repair or modify this device yourself, this will invalidate the
warranty, and may cause further damage to the device and could cause
personal injury. In the case of any fault, please turn off the device
immediately and contact August International customer services or your
retailer to arrange a professional repair.

2.Main Features

English

Maintenance

Please unplug all connection wires before cleaning this machine.

Please wipe th e
display scre en
and buttons
with a soft
cloth. Only
clean the
screen with
profession al
LCDTV screen
cleanser.

Alcohol

Do not use any
detergents ,
alcohol,
benzene or
chemical
product when
cleaning thi s
device

-1-

Portable HD Freeview TV
USB PVR TV Recorder with Timeshift
Multimedia Video and Music Player
Supports DVB-T/T2 TV Boxes
7 Day EPG and Subtitles
Battery Compartment
USB and Micro SD Card Reader
Mini HDMI Input

-2-

3. Box Contents

Quick Start Guide

DA100D TV

Telescopic Antenna

AC/DC Adaptor

Digital TV Antenna

HDMI Cable

3.1 Interchangeable Plugs

CH+VOL+

MENU

MODE

REC AUDIO FAV TV/R

CH-VOL-

EXIT

DA100D

Remote Control

AV Cable

Stand

EN

FR

10.1" HD DIGITAL / ANALOGUE TV & MULTIMEDIA PLAYER

DE

TV TNT HD / ANALOGIQUE 10.1'' & LECTEUR MEDIA

IT

TNT HD 10.1" DIGITAL / ANALOG TV & MEDIA PLAYER

ES

TV TDT HD / ANALOGICA 10.1" & LETTORE MULTIMEDIALE

TV 10.1" HD TDT / ANALÓGICA Y LECTOR MULTIMEDIA

User Manual

DA100D

1. Connect an antenna to the DA100D.

2. Plug the DA100D into a mains power socket using the supplied power adaptor.

3. Switch the DA100D on using the remote control.

4. Use the arrow buttons to select language.

DA100D

5. Press <Enter> to confirm.

6. Use the arrow buttons to select country.

7. Press <Enter> to begin auto search.

Note: If you want to exit auto search, press <EXIT>, then Use < > or < > to
select YES or NO.

Please note that the signal strength in some areas may not be sufficient to
support TV reception using a portable aerial. The distance from the closest
transmitter and other factors such as surrounding buildings, the walls of your
house, weather and electro-magnetic interference caused by power and
telecommunication infrastructure may affect signal strength. Changing location
may improve signal reception but a rooftop aerial designed for digital TV should
be used to achieve the best possible reception.

English

UK EU

In ser tio n Re lea se

2.pull

push

push

push

hole

1

2

3

-3-

1.push

4

1. Safety Instructions

Contents

4. Part Names and Functions

4.1 Front

1

4.2 Back

2. Main Features

3. Contents

4. Part Names and Functions

5. Connection and Setup

6. Startup

7. Digital TV

8. Analogue TV

9. Media Player

10. Display Settings

11. Audio Settings

12. Time Settings

13. System Settings

14. Battery Compartment

15. Specifications

16. Troubleshooting

17. Warranty

2
3
4
8
10
10
14
15
15
15
15
16
17
18
19
20

1

2
3

HDMI AV IN DC IN 12V

4
5

6
7

8
9

1 2

1. LCD display

2. IR receiver window

*NOTE:

The standby power indicator lights red when the device is in standby mode and connected to an
external power source. When the device is switched on, the light will be green.

4.3 Key Function

1. Speakers

2. Antenna In

3. USB Port

4. HDMI In

5. Micro SD Card Slot

6. Aux Out

10 11

7. AV In

8. Power Indicator

9. DC IN 12V

10. Stand Slot

11. Battery Compartment

English

1. Power / Play / Pause

2. Main Menu

3. Left / Rewind

4. Right / Forward

5. Enter / Confirm

6. Channel Down / Down / Previous Track or Chapter

7. Channel Up / Up / Next Track or Chapter

8. Volume Down

9. Volume Up

10. Press to cycle through modes. Press <ENTER> to confirm

-4-

4.4 Remote Control

4.4.1 Remote Button Functions

10
11

1 0~9 Numbers

12

1

2

3

4

5

6
7

8

9

VOL+

VOL-

MENU

MODE

REC AUDIO FAV TV/R

CH+

CH-

EXIT

13

14

15

16
17

18

19
20

21
22

23
24

25

2 VOL+ Volume Up
3 Up
4 Left
5 VOL- Volume Down
6 Down
7 MENU Main Menu
8 SUB-T Subtitle
9 MODE Select mode
10 or REC Play or Pause / Start or Stop recording
11 or AUDIO Stop / Select audio channel or audio language
12 Power ON / OFF
13 Mute and unmute the sound
14 RECALL Return to the previous channel
15 CH+ Channel Up
16 Right
17 ENTER Confirm Settings
18 CH- Chan nel D own
19 EXIT Exit all settings
20 INFO Freeview Channel information or Mode information
21 TTX Freeview Interactive Teletext or Start and S top MHEG-5
22 EPG 7 Day Electronic Program Guide
23 or TV/R Forw ard i n med ia pl aye r mode /
Change between TV and Radio mode
24 or FAV Rewind in media player mode / Favorite channel list or set
favorite channels
25 Colour Buttons Red, Green, Yellow, Blue Buttons

English

DA100D

-5-

-6-

4.4.2 Use of the Remote Control

Please remove the PVC packaging before using the remote control for the first time.

1. Do not expose the remote control to direct sunlight or very strong / bright light.

2. Do not drop or step on the remote control or subject it to shocks.

3. Keep the remote control away from extreme heat and humid environments.

4. Keep the remote control away from water.

Operating range

1. The IR range of the remote control is 5 meters.

2. The IR sensor on the remote control should be
aimed directly at the sensor on the front of the
device. It may not be possible to operate the device
if there are obstacles between it and the remote

<5m

30°

30°

control.

3. The receiving angle is ±30°.

MENU

MODE

REC AUDIO FAV TV/R

DA100D

CH+VOL+

CH-VOL-

EXIT

Replacing the battery

If the remote control does not function or if the operating range becomes reduced,
replace the old battery with a new one.

5. Connection and Setup

5.1 Connecting the power adaptor

1. Connect the power adaptor to the DC IN 12V socket.

2. Plug the power adaptor into the mains power socket.

English

5.2 Connecting headphones

Connect your headphones to the headphone socket.

Pull out the battery holder
and remove the old battery.

Lithium battery(CR2025)

+

Insert the new battery into the battery
holder with the + side facing upwards.

-7-

Replace the battery holder.

To headphone

*Note:

When headphones are connected to the device, no sound will be played through
the speakers.

Headphone and Earphone Safety

1. Listening through headphones or earphones at high volume for prolonged
periods can cause damage to your hearing.

2. Please be considerate to others and use closed back headphones or listen at
low volume whilst in public.

3. If you are experiencing tinnitus, stop using headphones or listen only at a very
low volume.

4. Even at a low volume, prolonged use of headphones or earphones can cause
damage to your hearing.

-8-

5.3 Connecting to a Source Device via HDMI

Switch off the DA100D and source device before connecting or disconnecting
any cables.

HDMI cable

(Included)

Signal flow

Signal flow

AV System

5.4 Connecting to a Source Device via AV

Switch off the DA100D and source device before connecting or disconnecting
any cables.

Black

AV cable

(Included)

6. Start up

6.1 Switching the device off or on

6.1.1 Switching on

Connect the device to the mains and
wait 5 seconds. Then either press and
hold the power button on the device for

1.5 seconds, or press the power button
on the remote control to switch the
device on.

6.1.2 Switch Power Off

Either press and hold the power button
on the device for 1.5 seconds, or press
the power button on the remote control
to switch the device off.

6.2 Mode settings

Press <MODE> repeatedly to select
between the following modes:
DTV: Freeview TV, press <ENTER> to
change
ATV: Analogue TV, press <ENTER> to
change
HDMI: HDMI input, press <ENTER> to
change
AV: AV input, press <ENTER> to
change
Media Player: Media Player Mode,
press <ENTER> to Switch to it.

English

7.1 DTV Auto Search:

1. Press <MENU> to enter the main
menu.

2. Use < > and < > to select
‘Channel’.

3. Use < > and < > to highlight the
‘Country’.

4. Use < > and < > to change the
country.

5. Use < > and < > to highlight ‘Auto
Search’.

OUT

AV System

OUT

Yellow

Connect to the Video
Output of the AV device

Signal flow

Red
White

Connect to the Audio
Output of the AV device

-9-

Signal flow

7. Digital TV

1. Connect an aerial to Antenna In.

2. Press <MODE>, then use < > or
< > to select DTV.

3. Press <ENTER>.

6. Press <ENTER> to confirm.

-10-

Note: If you want to exit auto search,
press <EXIT>, then Use < >or < >
to select YES or NO.

7.2 DTV Manual Search

1. Press <MENU> to enter the main
menu.

2. Use < > and < > to select
‘Channel’.

3. Use < > and < > to highlight the
‘DTV Manual Search’.

4. Press <ENTER> to enter manual
search settings.

5. Use < > and < > to select
channel and frequency.

Note: The signal bar shows the signal
quality. After a manual search, the
DA100D plays new channels
automatically.

7.3 DTV Channel Manager

Channel Manager allows the user to
delete, move, favorite and skip
channels.

1. Press <MENU> to enter the main
menu.

2. Use < > and < > to select
‘Channel’.

3. Use < > and < > to highlight
‘Channel Manager’.

4. Press <ENTER> to enter channel
edit and use < > and < > to highlight
to channel

5. Press ‘RED’ to delete a channel.

6. Press ‘YELLOW’ and use < > and
< > to move a channel, press
<ENTER> to confirm.

7. Press ‘BLUE’ to skip a channel.

7.4 LCN (Logical Channel Number)

To switch LCN on or off:

1. Press <MENU> to enter the main
menu.

2. Use < > and < > to select
‘Channel’.

3. Use < > and < > to highlight the
‘LCN’.

4. Press <ENTER> to switch the LCN
on or off.

7.5 Channel Information

Press <INFO> to view channel
information:

Press <INFO> again to show signal
Strength and Quality:

7.7 Subtitles

Press <SUB-T> to set Subtitle for
subtitle settings.

1.Use< > or < > to select a
language or switch off subtitles.

2.Press <ENTER> to confirm.

English

Primary and Secondary Subtitle
Languages.

1.Press <MENU> to enter the main
menu.

2.Use < > and < > to select
‘System’.

3.Use < > and < > to select ‘Subtitle
Language’, press <ENTER> to enter.

4.Use < > and < > to change
between your Primary and Secondary
Subtitle language, use < > or < > to
select one language, then press
<MENU> to return.

6. Press <ENTER> to confirm.

8. Press < or FAV> to add or remove
a channel to or from your favorite list.

Press <MENU> to exit Channel
Manager.

-11-

7.6 Recall

Press <RECALL> to go back to the last
watched channel.

-12-

7.8 Teletext

Press <TTX> to access teletext or red
button content, if available.

7.9 AUDIO Language

1. Press <MENU> to enter the main
menu.

2. Use < > and < > to select
‘System’.

3. Use < > and < > to select ‘Audio
Language’, press <ENTER> to enter.

4. Use < > and < > to select the
Primary or Secondary audio language.

5. Use the arrow buttons to select a
language then press <MENU> to return.

7.11 TV and Radio Modes

Press < or TV/R> to switch between
TV and Radio modes.

7.12 Record and Time Shift

Connect a USB storage device with
sufficient free space for the intended
recording.

Live Recording

1. Press < or REC> to start recording.

2. Press < > to stop recording.
Time Shift

1. Press < or REC> to start recording.

2. Press < or REC> to show the
onscreen options.

3. Select < > and press <ENTER> to
enable Timeshift.

4. Select < or > and press
<ENTER> to pause or resume.

5. Select < > and press <ENTER> to
rewind.

6. Select < > and press <ENTER> to
fast forward.

7. Select < > and press <ENTER> to
stop Timeshift.

8. Press < > to stop recording.

7.13 Schedule Recording

1. Press <EPG> to access the EPG.

2. Use <◀> and <▶> to select the
channel you wish to record.

3. Use <▲> and <▼> to select the
desired program.

4. Press <RED> to enter the recording
settings.

5. Press ‘OK’ to schedule the recording
using the default time settings.

Note: To enter the date and time
manually, change the mode from ‘Auto’
to ‘Once’, ‘Everyday’ or ‘Weekly’ then
input the start time and the finish time.

7.14 Reminder

1. Press <EPG> to access the EPG.

2. Use <◀> and <▶> to select the
desired channel.

3. Use <▲> and <▼> to select the
program you wish to be reminded
about.

4. Press <Blue> to enter the reminder
settings.

5. Press OK to schedule the reminder
using the default time settings.

Note: To set the reminder manually, use
<▲> and <▼> to select the setting and
use <◀> and <▶> to change the time.

2. Use <◀> and < ▶> to select
‘Channel’.

3. Use <▲ > and < ▼ > to highlight the
‘Country’.

4. Use <◀ > and <▶> to change the
country.

5. Use <▲> and <▼> to highlight ‘Auto
Search’.

6. Press <ENTER> to confirm.

8.2 ATV Manual Search

1. Press <MENU> to enter the main
menu.

2. Use <◀> and <▶> to select
‘Channel’.

3. Use <▲> and <▼> to highlight the
‘ATV Manual Search’.

English

7.10 EPG (Electronic Program Guide)

Press <EPG> to access the EPG.

Note: Micro SD card cannot be used for
recording.

The antenna socket provides an output
of 5V, allowing you to power an
amplified antenna. Do not plug the
amplified antenna into a mains power
socket as this will overpower the
amplifier and generate interference.

While the TV is switched on, the USB
port provides an output of 5V, allowing
you to charge another device.

-13-

8. Analogue TV

1. Connect an aerial to Antenna In.

2. Press <MODE>, then use <▲> or
<▼ > to select ATV.

3. Press <ENTER>.

8.1 ATV Auto Search

1. Press <MENU> to enter the main
menu.

4. Press <ENTER> to enter manual
search settings.

5. Use <▲> and <▼> to select options.

6. Use <◀> and <▶> to change or
start search.

-14-

9. Media Player

1. Connect a USB storage device or
insert a Micro SD card

2. Press <MODE> and use <▲> and
<▼> to select ‘Media Player’, press
<ENTER> to confirm.

3. Use <◀> and <▶> to select a media
format.

4. Select USB or Micro SD and press
<ENTER>.

5. Use the arrow buttons to select a file
and press <ENTER> to confirm.

10. Display Settings

You can adjust picture settings in any
mode.

1.Press <MENU> to enter the main
menu.

2.Use < > and < > to select
‘Display’.

3.Use < > and < > to select options.

4.Use < >and < > to change the
settings.

5.Press <MENU> to return.

11. Audio Settings

You can adjust audio settings in any
mode.

1.Press <MENU> to enter the main
menu.

2.Use < > and < > to select ‘Audio’.

3.Use < > and < > to select options.

4.Use < > and < > to change the
settings.

5.Press <MENU> to return.

12. Time Settings

You can change time settings in any
mode.

1.Press <MENU> to enter the main
menu.

2.Use < > and < > to select ‘Time’.

3.Use < > and < > to select options.

4.Use < > and < > to change the
settings.

5.Press <MENU> to return.
NOTE: In DTV the time is set

automatically.

-15-

13. System Settings

You can set system settings in any
mode.

1.Press <MENU> to enter main menu.

2.Use < > and < > to select
‘System’.

3.Use < > and < > to select options.

4.Press <ENTER> or use < > and
< > to change.

Note: Audio and subtitle language
settings are only available in DTV mode.

13.1 Factory Reset

To reset to factory settings select
factory reset from the system menu
then press < > to confirm or < > to
cancel.

English

13.2 Software Update

To update the system software,
download the software package from
our website and follow the steps below:

1. Extract / unzip the downloaded file.

2. Copy the software file to a USB
storage device.

3. Insert the USB device into the
DA100D’s USB port.

4. Press <MENU> to enter the main
menu.

5. USE <◀> and <▶> to select
‘System’.

6. USE <▲> and <▼> to select
‘Software Update’ and press <ENTER>.

7. Press <◀> to confirm and start the
update or press <▶> to cancel.

Once updated, the DA100D will reboot
automatically and the installation guide
will appear.

-16-

14. Battery Compartment

This device can be powered by 6 x AA 1.2V rechargeable batteries.
Fully charged 2800mAh batteries supports playback for up to 1.5 hours.
The device will automatically charge batteries when connected to an external
power source.

Caution:

Use AA 1.2V rechargeable batteries only. Other batteries may damage the
device and will invalidate the warranty.
Fully charge the batteries before first use.
Remove the batteries from the compartment if the device will not be used for an
extended period of time.
Dispose of any used batteries in compliance with WEEE and other government
regulations.

1) Make sure the device is switched off and the power lead is disconnected.

2) Press and slide the battery cover in the direction shown.

HDMI AV IN DC IN 12V

Pre ss and sl ide out

15. Specifications

Screen size: 10.1Inch
Resolution: 1024x600pixels

LCD Display

Digital TV Frequencies

Decode Standard
Video Decoding

DVB-T2 Band Width
Analogue TV Format

Analogue TV Frequency

AV In

HDMI In
Antenna Input

Micro SD Reader
USB Port

Supported USB storage device
file system

Built-in Speaker

Power Adaptor

Battery Compartment

Power Consumption < 18W
Dimensions 263x172x31mm

Net Weight 681g

Aspect Ratio: 16:9
Brightness: 200cd/m2
Contrast: 700:1

VHF: 177.5~226.5MHz
UHF: 474~858MHz

DVB-T,DVB-T2
H.265, H.264, MPEG4, MPEG2
6, 7, 8 MHz
PAL-I , DK, BG SECAM-L, DK
VHF: 48.25 60.25MHz

168.25~456.25MHz
UHF: 464.25~863.25MHz

System: PAL, NTSC, SECAM CVBS
Input: 1.0Vp-p/75ohm
Audio Input: 1Vrms~2Vrms

HDMI 1.4a Resolution
Impedance: 75ohm
Supports Micro SD cards of up to 32GB
USB 2.0 host (5V,500mA)

NTFS; FAT32

2 x1.5W, 8 ohm
AC 100~240V 50/60Hz

DC 12V/1.5A
Watch TV for up to 1.5 hours with 6 x AA

1.2V 2800mAh rechargeable batteries

English

~1

3) Remove old AA batteries if required.

4) Insert new AA batteries following the ‘+’ and ‘-‘ symbols.

4) Replace battery cover and slide to lock.

-17-

Media Formats

Movie

Music player

Photo vie wer

Video Type

Audio Type

Audio bit Ratio
Resolution

Fram e Rate

File Type
Fram e Rate

File Type
Resolution

H.26 5, MPEG1、2、4，DivX TS, MKV, TP, AVI,
M2TS , VOB, DAT, MPG, MPEG, MOV

MP3, WAV, MPEG-1 / 2 layer I / II,
M4P, HE-AAC, COOK, Dolby

32Kbps ~ 48 Kbp s
Max.192 0x1 080

Max. 30fps/25fps(PAL)

MPEG 1 / 2 laye r 1、2、3, AC3 ,WAV,OGG
32Kbps~48Kbps

JPEG/BMP/PNG
Up to 15 360 x86 40

-18-

16. Troubleshooting

Problems listed below do not necessarily signify a fault with the unit. Please check
this list before requesting repairs.

Problems

No picture or sound

No image

No sound

No Recording

Picture freezing, and/or
sound distorting

No signal

Dark Picture

Snowstorm

Achromatic/Flashing/
No Colour

Check the connection with the AC adaptor or car adaptor.
Use of an unauthorized power supply.
Press POWER on the remote to turn on the device, or press
and hold POWER on the device for 1.5 seconds to turn it on.

Check the channel selection. Scan for channels again.
Always rescan for channels in new locations.

Check the sound volume. If you are using earphones, test
them on another item. Check the earphone cable is plugged
into the earphone socket on the device. Incorrect TV Format
setting in Analogue TV mode. Set the device to factory
default and then try again.

Check the file system of the USB storage device, NTFS is
the recommended format. Insert the USB storage device
after the DA100D is on.

Signal may be too weak, please check the aerial. Try to use
a proper roof top aerial or an amplified aerial.

Please check the aerial. Try to use a proper roof top aerial or
an amplified aerial.

Please adjust Brightness and/or Contrast settings.

Motors/Trains/High Voltage Lines and Neon Lights may
affect the signal.

Please adjust the Colour Settings.
Incorrect TV Format setting in Analogue TV mode.

Possible Causes and Solutions

17. Warranty

This product is guaranteed for twelve months from the date of the original
purchase. In the unlikely event of any defect arising due to faulty materials or
workmanship, the unit will be either replaced or repaired free of charge (where
possible) during this period. An alternative product will be offered in case the
product is no longer available or repairable.

This warranty is subject to the following conditions:
The warranty is only valid within the country where the product is purchased.
The product must be correctly installed and operated in accordance to the
instructions given in this user manual.
The product must be used solely for domestic purposes.
The warranty only covers the main units, and does not cover the accessories.
The warranty does not cover the damage caused by misuse, negligence,
accident and natural disaster.
The warranty will be rendered invalid if the product is resold or has been
damaged by inexpert repairs. The manufactures disclaim any liability for
incidental or consequential damages.
Please consult our customer adviser before returning any product; we are not
responsible for any unexpected product returns.
Any faulty product must be kept and returned in the original packaging with all
the accessories and the original copy of the purchase receipt.

The warranty is in addition to, and does not diminish, your statutory or legal rights.

Please note:

1. A LCD display panel comprises a very large number of pixels and each pixel
contains three sub-pixels - red, green and blue. Due to the complex manufacturing
process, occasional pixel anomalies may occur. Pixel anomalies cannot be fixed or
repaired and can happen at any stage in the LCD's life. August products should not
be deemed as faulty if there are no more than three bright and dark pixels
respectively.

English

Warning

This user manual is intended for reference purposes only. No further notice will
be given regarding modification of any information contained therein. Due to
continuing improvements, the features and design are subject to change
without notice.

Warning

No user serviceable components are fitted inside this TV. Do not attempt any
repairs, as this will invalidate the warranty. Any repairs must be carried out by
either the manufacturer or their nominated service centre. Parts inside this set
are subject to high voltage.

-19-

2. Portable TV antennas included in the box are for people to watch Freeview TV in
areas where the signal is very strong and there may be difficulties in receiving
signal with the included portable antennas in some regions at present. This is due
to the fact that Freeview is yet to operate in full power in the UK. August TVs
should not be deemed as faulty if it can receive Freeview by connecting to a proper
digital rooftop aerial.

Customer Service:

Telephone: [phone]
Email: [e-mail]

This product is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. The Declaration of conformity may be
consulted online at
http://www.augustint.com/en/declaration.

-20-