Audrey Lane ADYL1004 Installation & Assembly

OLIVIA

11 1/4"

11 1/4"

Petite Scale

W: 11 1/4”

H: 11 1/4”

Unit = .88 sf

calacatta matte & brushed brass

SHOWN IN:

UNIT DIMENSION DETAIL:

48

11"

Grande Scale

1'-10"

W: 11”

H: 1’-10”

Unit = 1.69 sf

TECHNICAL

ASTM Designation:

RECOMMENDED USE

Products with 100%

porcelain blend are suitable for interior and

exterior floor and wall applications.

Because of the sharp edges created in the Olivia Calacatta & Brass

pattern, we recommend wall application only.

Metals are not recommended for submerged applications as the

brass oxidization will be intensified and cleaning when submerged

will be extremely difficult.

Matte porcelain meets DCOF slip resistance guidelines of >.42 wet

INSTALLATION

Install per TCNA handbook for porcelain tile. It is recommended
you use a premium polymer modified thin-set. In addition, make

sure the installer is familiar with the special techniques used when
installing water-jet materials. Please contact us before
installation for any questions you may have at 407-636-3108.
Audrey Lane is not responsible for installation claims after the
material is installed.

To avoid scratching of the brass and stainless while grouting, we
recommend that you mask the face and edge of the tiles where brass or
stainless is located.

Always inspect material prior to installation; installed material
cannot be accepted for return or credit. Please note that variations
in color, shade, surface texture and size are natural characteristics
of all our products and should be expected. Images shown are
representative, but may not indicate all variations in these
characteristics.

Always lay out material prior to installation to properly blend and balance
color.

Periodic cleaning is recommended using products formulated for

porcelain tile, mild detergent and hot water can be used to clean the brass

TECHNICAL DATA

Please contact us if you have any questions prior to installation

ASTM C1028 ASTM A137.1 Mohs Scale ASTM C373 ASTM C1026

ANSI Standard:

Shade Text ure

Series ADA Com pliant

Stone Porcelain Matte Yes >3 High >0.6 >0.42 6 <0.1% Resistant EQ4.2 & SS7.1 9.5 mm Yes Yes Yes Yes

Stone Porcelain Polished No >3 High - - 5 <0.1% Resistant EQ4.2 & SS7.1 9.5 mm Low Footfall Yes Yes Yes

Metals No - Moderate - - - - - - 9.5 m m Low Footfall Yes No No

Wear

ating/P EI

R

pectrum (STS)

S

>0.6 Dry/Wet - N/A ≤3% Resistant

Coefficient of

riction

F

ating

Dry/Wet )

R

(

and stainless steel.

DCOF ACU

est

T

H

Scratch

ardness

Water

bsorptio n

A

Frost

esistance

R

LEED

Nomin al

hickness

T

Floor Wall Wet Areas Exterior

55