Page 1
LONDON
7 1/2"
11 3/4"
Petite Scale
W: 11 3/4”
H: 7 1/2”
Unit = .61 sf
graphite polished & brushed brass
SHOWN IN:
UNIT DIMENSION DETAIL:
36
11 1/4"
1'-6"
Grande Scale
W: 1’-6”
H: 11 1/4”
Unit = 1.41 sf
Page 2
TECHNICAL
ASTM Designation:
RECOMMENDED USE
Products with 100% porcelain blend are suitable for interior and exterior
oor and wall applications.
Products with metal are suitable for interior oor and wall applications.
Metals are not recommended for submerged applications as the brass
oxidization will be intensied and cleaning when submerged will be
extremely difcult.
Matte porcelain meets DCOF slip resistance guidelines of >.42 wet
INSTALLATION
Install per TCNA handbook for porcelain tile. It is recommended
you use a premium polymer modied thin-set. In addition, make
sure the installer is familiar with the special techniques used when
installing water-jet materials. Please contact us before installation
for any questions you may have at 407-636-3108. Audrey Lane is
not responsible for installation claims after the material is installed.
To avoid scratching of the brass and stainless while grouting, we recommend
that you mask the face and edge of the tiles where brass or stainless is located.
Always inspect material prior to installation; installed material cannot
be accepted for return or credit. Please note that variations in color,
shade, surface texture and size are natural characteristics of all our
products and should be expected. Images shown are representative,
but may not indicate all variations in these characteristics.
Always lay out material prior to installation to properly blend and balance color.
Periodic cleaning is recommended using products formulated for porcelain
tile, mild detergent and hot water can be used to clean the brass and stainless
steel.
Please contact us if you have any questions prior to installation
TECHNICAL DATA
ASTM C1028 ASTM A137.1 Mohs Scale ASTM C373 ASTM C1026
ANSI Standard:
Shade Text ure
Series ADA Com pliant
Stone Porcelain Matte Yes >3 High >0.6 >0.42 6 <0.1% Resistant EQ4.2 & SS7.1 9.5 mm Yes Yes Yes Yes
Stone Porcelain Polished No >3 High - - 5 <0.1% Resistant EQ4.2 & SS7.1 9.5 mm Low Footfall Yes Yes Yes
Metals No - Moderate - - - - - - 9.5 m m Low Footfall Yes No No
Wear
ating/P EI
R
pectrum (STS)
S
>0.6 Dry/Wet - N/A ≤3% Resistant
Coefficient of
ating
R
(
riction
F
Dry/Wet )
DCOF ACU
est
T
Scratch
ardness
H
Water
bsorptio n
A
Frost
esistance
R
LEED
Nomin al
hickness
T
Floor Wall Wet Areas Exterior
55
Loading...