VOCAL CONDENSER MICROPHONE
VX10/VX10
L
o
Vocal Condenser
VX10 / VX10 Lo
OVERVIEW:
The VX10 is a professional vocal condenser microphone designed to set new
performance standards in the areas of live sound and broadcast applications.
With a uniformly controlled frequency response from 40 Hz - 20 kHz, the
VX10 is highly sensitive to transient response and will reproduce vocals and
speech with exceptional detail and realism.
The VX10 is characterized with a cardioid polar pattern which helps isolate
the vocals from the rest of the instruments on stage. Other features include
a 21 mm gold vapor capsule and a multi-stage internal pop lter. The VX10
will handle sound pressure levels of ≥138 dB and will provide over 20 dB
of ambient noise rejection on live stages. The VX10 is also available in a
low output model (VX10 Lo) for greater control with loud stage volumes or
extremely powerful vocalists.
In addition to vocal applications, the VX10 is ideally suited to capture
acoustic instruments such as guitar, woodwinds, brass, percussion toys,
drum overheads, hi-hat and piano. It is an excellent choice for professional
studio recording.
The VX10 is well balanced, comfortable to hold, durable, and manufactured
with high standards and tight tolerances. The VX10 includes a precision
die cast zinc alloy body, black E-coat nish, laser etched model and serial
number, Switchcraft® or Audix XLR connector and heavy duty nylon clip.
SUPPLIED ACCESSORIES:
Foam lined wooden carrying case (CASE WOOD)
Heavy duty nylon mic clip (MC1)
Carrying pouch (P1)
OPTIONAL ACCESSORIES:
WS 10 - External acoustic foam windscreen
GR357 - Rounded top steel mesh grill ball
APS 2 - Two-channel phantom power supply
CBL 20 - 20’ XLR-XLR Low noise mic cable
CBL DR25 - 25’ Right angle XLR-XLR low noise mic cable
FEATURES:
Studio quality sound
Extremely detailed and accurate
Multi-stage internal pop filter
Low noise circuitry
Comfortable to hold
3 year warranty
APPLICATIONS:
Lead vocals
Background vocals
Studio vocals
Speech
On air announce microphone
Live performance and live broadcasts
Excellent for use with in-ear monitors
Acoustic instruments
MC1 CASE WOOD WS 10 APS 2 CBL 20
SPECIFICATIONS:
VX10 / VX10 Lo
Transducer Type Condenser
Frequency Response 40 Hz - 20 kHz
Polar Pattern Cardioid
Output Impedance 250 ohms
Sensitivity VX10 - 24 mV / Pa @ 1k
VX10-Lo - 4 mV / Pa @ 1k
Equivalent Noise Level 19 dB (A weighted)
Signal to Noise Ratio 75 dB
Off Axis Rejection >20 dB
Maximum SPL ≥138 dB
Dynamic Range 119 dB
Power Requirements 48 - 52v phantom
Connector Switchcraft® or Audix male
XLR connector
Polarity Positive voltage on pin
2 relative to pin 3 of
output XLR connector
Housing / Finish Die Cast Zinc
Brass capsule housing/
Black E-coat
Weight 318.6 g / 11.24 ounces
Length 180 mm / 7.1 inches
FREQUENCY / POLARS:
ARCHITECTS AND ENGINEERS SPECIFICATIONS:
The microphone shall be of the condenser type with a cardioid polar pattern. The microphone
shall operate on 48-52 Volts phantom power and the nominal output impedance shall be equal
to 250 ohms at 1 kHz. The microphone shall have a sensitivity of 24 mV / Pa at 1 kHz. The
microphone shall have a maximum SPL level of ≥138 dB with a THD of 0.5%. The microphone
shall have a steel mesh grill and a body of die cast zinc alloy with dimensions of 24 mm diameter
at the base, 50 mm in diameter at the and 180 mm in length. The microphone shall be the Audix
VX10.
OPERATION:
The VX10 is a low impedance microphone and should be plugged into a “mic level” input on your
console, mixer, or recording device. The VX10 requires phantom power and will NOT operate
without phantom power voltage (48 Volts recommended) which is available on most professional
mic preamps and mixing devices. If phantom power is not available on your equipment, you will
have to procure a phantom power supply (such as the Audix APS2).
Avoid plugging or unplugging the microphone from a PA system unless the channel is muted or the
volume of the system is turned down. Failure to do so may result in a loud “popping” noise which
could seriously damage the speakers in the PA system
.
USER TIPS:
The VX10, an excellent choice for lead and background vocals, has a cardioid pick-up pattern which
helps to minimize sound from other instruments on stage from “bleeding” into the microphone.
The VX10 is highly sensitive and will accommodate working distances of 1-12 inches from the
performers mouth. Depending on the instrumentation and volume on stage, the vocalist may have
to experiment to nd the optimum working range.
When using stage monitors, avoid pointing the back of the microphone directly into the stage
monitor. Instead, set the microphone at an angle parallel to the oor, putting the angle of the mic on
a different plane with the angle of the monitor.
Allow a distance of 2-3 feet between microphones to avoid phase cancellation issues.
RECORDING:
The VX10 technology is derived from the Audix SCX series, which was developed specically
for high quality recording applications. For this reason, the VX10 can be used successfully to
record practically any acoustic instrument. Simply point the microphone towards the sound
source, being careful that the mic is the correct distance in order to avoid distortion.
Because of the smaller diaphragm and cardioid pick-up pattern, close miking techniques may be
employed to minimize the room sound and maximize the sound of the instrument.
*Further miking techniques may be found on our website at www.audixusa.com
***All specications subject to change without notice.
SERVICE AND WARRANTY:
This microphone is under warranty for a period of 3 years from
any and all manufacturing defects. Should your microphone
fail in any way, please contact the Audix Service department
at 503-682-6933. A Return Authorization number is required
before returning any products.
CARE AND MAINTENANCE:
The VX10 & VX10-Lo are manufactured to exacting specs with roadworthy
construction. However, the capsule is highly sensitive and should be handled
with care. Avoid extreme temperatures and be sure to store your microphone
in the pouch provided when not in use. Moisture of any kind can adversely
affect the sound and performance of your microphone.
AUDIX WARRANTY REGISTRATION FORM
Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________
Please register your product online at www.audixusa.com or mail this form to:
Audix Microphones P.O. Box 4010 Wilsonville, OR 97070
DIMENSIONS (mm):
www.audixusa.com
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
Please Check all that apply:
Male Female
Age: Occupation: Primary Instruments: Product to be used for:
18 or Under Musician Vocal Pro live sound
19-25 Producer Guitar / Bass Pro recording
26-35 Sound Eng. Drums Home recording
36-45 Radio/TV Keyboard Rehearsal
46-55 Production Brass Installation
55 + Other _______ Woodwinds School
Strings House of Worship
How did you hear about Audix? Other ___________ Other ___________
Magazine Ad Online Ad
On-line Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No
503-682-6933 Fax: 503-682-7114
1.1
Loading...