Audix OM6 SPECIFICATIONS

DYNAMIC VOCAL MICROPHONE
OM6
Dynamic Vocal
OM6
OVERVIEW:
Designed, assembled and tested by Audix in the USA, the OM6 is a dynamic vocal microphone used for a wide variety of live, studio, and broadcast applications. The OM6 is known for its broad frequency response, full-bodied and articulate sound reproduction, resistance to feedback and ability to handle high sound pressure levels in excess of 144 dB without distortion.
The OM6 response is tailored with condenser-like qualities: a smooth
rising response between 2k Hz - 10 kHz along with a at and fully
extended bass response from 60 Hz - 1 kHz. This, in conjunction with an extremely articulate mid-range, makes the OM6 an excellent choice for broadcast and live recording applications. The OM6 is well balanced, comfortable to hold, durable and manufactured with high standards and tight tolerances.
The OM6 includes a precision die cast zinc alloy body, black E-coat
nish, laser etched model and serial number, steel mesh grill,
Switchcraft® or Audix XLR connector and heavy duty nylon clip.
SUPPLIED ACCESSORIES:
Heavy duty nylon mic clip (MC1) Carrying pouch (P1)
FEATURES:
Clear, accurate vocal reproduction Handles high SPL without distortion Low handling noise Provides exceptional gain before feedback Provides maximum vocal isolation on stage Dent resistant spring steel grill 5 year warranty
OPTIONAL ACCESSORIES:
WS357 - External foam windscreen CBL-20 - 20’ XLR-XLR Low noise microphone cable
T50K - Low to high impedance matching transformer
MC1 WS357 CBL-20 T50K
APPLICATIONS:
Lead or backing vocals Live recording Broadcast Home studio- vocal and instrument Sax, brass, guitar, dobro, flute, percussion, drums
SPECIFICATIONS:
OM6
Transducer Type Dynamic Frequency Response 40 Hz - 19 kHz Polar Pattern Hypercardioid Output Impedance 200 ohms Sensitivity 1.5 mV / Pa @ 1k Capsule Technology VLM Type D Off Axis Rejection > 25 dB
Maximum SPL ≥144 dB
Power Requirements None Connector Switchcraft® or Audix male XLR connector Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Housing / Finish Zinc Alloy / Black E-coat Weight 307 g / 10.8 ounces
Length 176 mm / 6.9 inches
FREQUENCY / POLARS:
ARCHITECTS AND ENGINEERS SPECIFICATIONS:
The microphone shall be of the dynamic type and the polar pattern of the microphone shall be hypercardioid. The nominal output impedance shall be equal to 200 ohms at 1 kHz.The microphone shall have a sensitivity of 1.5 mV / Pa at 1 kHz and a sound
pressure level ≥144 dB. The microphone body shall be of zinc alloy and the grill cap
shall be steel wire mesh. The overall dimensions shall be 23 mm in diameter at the base, 53 mm in diameter at the widest point on the grill and 176 mm in length. The microphone shall be the Audix OM6.
OPERATION:
The OM6 is a low impedance microphone and should be plugged into the “mic level” input of your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be effected in any way by phantom power should it be running simultaneously while the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down.Failure to do so may result in a loud “popping” noise which could seriously damage the speakers in the PA system.
USER TIPS:
The OM6 has a tight pick-up pattern in order to help eliminate sound from other instruments on stage from “bleeding” into the microphone. For best results, it is important to sing directly into the mic at close proximity (within 2 inches).
When using oor monitors, position the microphone so that it is parallel to the oor.
When using multiple microphones on a live performance stage, allow a distance of 2-3 feet between mics to avoid phase issues. *Further miking techniques may be found on our website at www.audixusa.com
***All specications subject to change without notice.
SERVICE AND WARRANTY:
This microphone is under warranty for a period of 5 years from any and all manufacturing defects. Should your microphone fail in any way, please contact the Audix Service department at 503-682-6933. A Return Authorization number is required before returning any products.
CARE AND MAINTENANCE:
The OM6 is manufactured to exacting specs with roadworthy construction. However, the capsule is highly sensitive and should be handled with care. Avoid extreme temperatures and be sure to store your microphone in the pouch provided when not in use. Moisture of any kind can adversely affect the sound and performance of your microphone.
AUDIX WARRANTY REGISTRATION FORM
Name:________________________________ Model:___________________ Company:_____________________________ Serial Number:_____________ Address:______________________________ Store:____________________ City:_________________________________ Store Location:_____________ Prov./State:___________ Zip:_____________ Purchase Date:_____________ Phone: ( )___________________________ Signature:_________________ Email:________________________________ Date:____________________
Please register your product online at www.audixusa.com or mail this form to:
Audix Microphones P.O. Box 4010 Wilsonville, OR 97070
DIMENSIONS (mm):
www.audixusa.com
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
Please Check all that apply: Male Female
Age: Occupation: Primary Instruments: Product to be used for: 18 or Under Musician Vocal Pro live sound 19-25 Producer Guitar / Bass Pro recording 26-35 Sound Eng. Drums Home recording 36-45 Radio/TV Keyboard Rehearsal 46-55 Production Brass Installation 55 + Other _______ Woodwinds School Strings House of Worship How did you hear about Audix? Other ___________ Other ___________ Magazine Ad Online Ad On-line Store Friend Do you own other Audix Products? Yes No Salesman Other __________ Model(s) ________________________________ Have you visited the Audix website? Yes No
503-682-6933 Fax: 503-682-7114
1.1
Loading...