Audix OM5 SPECIFICATIONS

DYNAMIC VOCAL MICROPHONE

OM5

Dynamic Vocal

OM5

OVERVIEW:

Designed, assembled, and tested by Audix in the USA, the OM5 is
a dynamic vocal microphone used for stage, studio and broadcast
applications. The OM5 is known for its clarity, resistance to feedback
and ability to handle sound pressure levels in excess of 144 dB
without distortion.

The OM5 is characterized with an extremely tight and uniformly
controlled hypercardioid polar pattern which helps to isolate the vocals
from the rest of the instruments on stage. With a wide frequency
range of 48 Hz - 19 kHz, the OM5 employs a VLM™ (Very Low Mass)
diaphragm for natural response, accurate sound reproduction, and
exceptional transient response.

The OM5 is naturally attenuated at 120 Hz to reduce boominess and
handling noise. The mid-range is tailored for presence allowing the
vocalist to be more easily heard in the mains as well as the monitors.
The OM5 is comfortable to hold, durable, and manufactured with high
standards and tight tolerances.

Roadworthy construction includes a precision die cast zinc alloy body,
black e-coat nish, laser etched model and serial number, steel mesh
grill, Switchcraft® XLR connector, and heavy duty nylon clip.

SUPPLIED ACCESSORIES:

Heavy duty nylon mic clip (MC1)
Carrying pouch (P1)

FEATURES:

Clear, accurate vocal reproduction
Handles high SPL without distortion
Low handling noise
Provides exceptional gain before feedback
Provides maximum vocal isolation on stage
Dent resistant spring steel grill
5 year warranty

OPTIONAL ACCESSORIES:

WS357 - External foam windscreen
CBL-20 - 20’ XLR-XLR low noise microphone cable
T50K - Low to high impedance matching transformer

MC1 WS357 CBL20 T50K

APPLICATIONS:

Lead or backing vocals
Live recording
Broadcast
Home studio- vocal and instrument
Sax, brass, guitar, dobro, flute, percussion, drums

SPECIFICATIONS:

OM5

Transducer Type Dynamic
Frequency Response 48 Hz - 19 kHz
Polar Pattern Hypercardioid
Output Impedance 200 ohms
Sensitivity 1.8 mV / Pa @ 1k
Capsule Technology VLM Type C
Off Axis Rejection >30 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® male XLR
Polarity Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3 of output
XLR connector
Housing / Finish Zinc Alloy /
Black E-coat
Weight 307 g / 10.8 ounces
Length 176 mm / 6.9 inches

FREQUENCY / POLARS:

ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be of the dynamic type and the polar pattern of the microphone
shall be hypercardioid. The nominal output impedance shall be equal to 200 ohms at
1 kHz.The microphone shall have a sensitivity of 1.8 mV / Pa at 1 kHz and a sound
pressure level ≥144 dB. The microphone body shall be machined of dies cast zinc
alloy and the grill cap shall be steel wire mesh. The overall dimensions shall be 23 mm
in diameter at the base, 53 mm in diameter at the widest point on the grill and 176 mm
in length. The microphone shall be the Audix OM5.

OPERATION:

The OM5 is a low impedance microphone and should be plugged into the “mic level”
input of your console, mixer, or recording device. Please note that your microphone
does not require phantom power and will not be eected in any way by phantom
power should it be running simultaneously while the microphone is in operation. Avoid

plugging or unplugging the microphone from the PA system unless the channel is
muted or the volume of the system turned down. Failure to do so may result in a loud
“popping” noise which could seriously damage the speakers in the PA system.

USER TIPS:

The OM5 has an extremely tight pick-up pattern in order to help eliminate sound from
other instruments on stage from “bleeding” into the microphone. For best results, it is
important to sing directly into the mic at close proximity (within 2 inches).
When using oor monitors, position the microphone so that it is parallel to the oor.
When using multiple microphones on a live performance stage, allow a distance of 2-3
feet between mics to avoid phase issues.
*Further miking techniques may be found on our website at www.audixusa.com

***All specications subject to change without notice.

SERVICE AND WARRANTY:

This microphone is under warranty for a period of 5 years from
any and all manufacturing defects. Should your microphone
fail in any way, please contact the Audix Service department
at 503-682-6933. A Return Authorization number is required
before returning any products.

CARE AND MAINTENANCE:

The OM5 is manufactured to exacting specs with roadworthy construction.
However, the capsule is highly sensitive and should be handled with care.
Avoid extreme temperatures and be sure to store your microphone in the
pouch provided when not in use. Moisture of any kind can adversely aect
the sound and performance of your microphone.

AU DI X WAR RA NT Y RE GI ST RATI ON F OR M

Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________

Please register your product online at www.audixusa.com or mail this form to:

Audix Microphones P.O. Box 4010 Wilsonville, OR 97070

DIMENSIONS (mm):

www.audixusa.com

Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070

Please Check all that apply:
Male Female

Age: Occupation: Primary Instruments: Product to be used for:
18 or Under Musician Vocal Pro live sound
19-25 Producer Guitar / Bass Pro recording
26-35 Sound Eng. Drums Home recording
36-45 Radio/TV Keyboard Rehearsal
46-55 Production Brass Installation
55 + Other _______ Woodwinds School
Strings House of Worship
How did you hear about Audix? Other ___________ Other ___________
Magazine Ad Online Ad
On-line Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No

503-682-6933 Fax: [phone]