Warning: This manual contains important safety and operating information. Please read and follow the instructions in this manual.
Failure
to do so could result in personal injury or damage to your XMCommander or to your vehicle.
User Manual
XM-RVR-FM-001C
Distributed by
Welcome
Thank you for purchasing an XMCommander Satellite Radio FM Modulator and Receiver System. Your
XMCommander gives you access to over 80 XM Satellite Radio channels of music, news, and information.*
Your XMCommander must be used with the enclosed connecting devices to ensure maximum performance
and safety. Professional installation is highly recommended.
*XM subscription required for reception. Not available in Alaska or Hawaii.
About XM
One big idea can change everything. And XM
Satellite Radio is one big idea: Radio to the Power
of X The number one Satellite Radio Service
in the universe gives you the power to choose
what you want to hear on – talk, sports, and
entertainment. That’s 80 basic channels in all, for a
low monthly subscription. Additional devices may
qualify for a reduced subscription fee through the
XM Family Plan.
Exploring the radio dial was never like this. Find the
spirit and the passion that made radio fun, now reborn
in all-digital sound without endless commercial
interruptions. Get to know the richness and range of
80 channels of continuous programming. XM is a
sonic frontier where you’ll discover a new kind of radio.
About XMCommander
XMCommander allows you to receive and play
XM’s 80 digital channels over your existing vehicle
audio system. Integrated seamlessly into your
existing vehicle sound system**, the XMCommander
provides endless hours of rich radio entertainment—
Radio to the Power of X® !
**Professional installation is highly recommended.
Important: The serial number for this device is located on
the top of the receiver unit. For your own security and
convenience, be sure to record this number on the
enclosed warranty card.
Contents
Section 1
Getting Started: Activating XMCommander . . . . . 2
Section 2
XMCommander
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Section 3
Basic Operations
Turning XMCommander On and Off . . . . . . . . 6
Basic Channel Selection . . . . . . . . . . . . . . . . . . 6
Select a Channel by Category . . . . . . . . . . . . . . 7
Save and Recall Functions . . . . . . . . . . . . . . . . 7
Menu Commands and Settings
FM Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Output Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TuneSelectTM. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Direct Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Section 4
Special Features
TuneSelectTM. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Jump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 5
Reference
Taking Care of Your XMCommander . . . . . . . . 9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 10
Getting Started: Activating XMCommander
To quickly begin enjoying XM Satellite Radio, follow these simple steps:
1.
Set up your XMCommander using the instructions in the installation guide or with the help of a professional
r.
installe
2.
Press the power button to turn the XMCommander on and verify that it is playing Channel 1, the XM
Channel.
Preview
3.
Select Channel 0. The receiver’s eight-character XM Satellite Radio ID number will appear on the display.
Write the number here:
Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used.
4. Activate your XM Satellite Radio service. To subscribe, make sure you have a major credit card and your
Satellite Radio ID number handy and log onto www.xmradio.ca. You can also activate your service
XM
calling 1-877-GET-XMSR. Reduced fees apply for online activation.
by
Note: You will need to keep your XMCommander on for at least one hour after requesting activation to receive the full channel line-up.
Warning: When using this product it is always important to keep
your
eyes on the road and your hands on the wheel. Not doing
so
could result in injury to you or to others or in property damage.
Caution: Failure to properly follow all installation
instructions
XMCommander
may result in personal injury or damage to your
or to your vehicle.
Technical Information
Dimensions
Controller.
Receive
Weight
Controller.
Receive
Inputs/Output
Antenn
Power.
Audio
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 in W x 1.75 in x H .83 in D (115 mm x 45 mm x 21 mm)
r. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.75 in W x 4.3 in x H 1.25 in D (95 mm x 109 mm x 32 mm)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oz (75 g)
r. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.8 oz (335 g)
s
a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 RF SMB Connector
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P13 connector, 12V DC, 500 mA maximum
output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 mm diameter ministereo jack
s e c t i o n 2
3
Tuning wheel
Power
button
Control
keys
Number keys
XMCommander
Controls
Figure 1. XMCommander
The XMCommander unit has a power button, two control buttons, tuning wheel, enter button and 10 number keys.
Turns the XMCommander on or off.
The display/menu button toggles between three display options:
1.
Channel name, channel number, and artist name
2.
Channel name, channel number, and song name
3.
Artist name and song title
Switches between DIRECT entry, Preset A, Preset B and Preset C.
Use the tuning wheel to scroll through and select a channel or a menu option. Pressing the center of the
tuning
wheel acts as an enter function and selects channels or menu options.
Number keys are used to select a channel directly (when in DIRECT entry mode) by entering its number.
Select
presets (when in Preset A, Preset B, or Preset C mode) by entering the number of the preset.
Enter button