Audiovox WHS200A Owners Manual

36 MONTH LIMITED WARRANTY

Applies to Audiovox Mobile Video Products

AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product
or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from
the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option)
without charge for parts and repair labor.

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage
(e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.

This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to
costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or
vehicle electrical systems.

This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged
through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory
serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED
TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY
ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person
or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale
of this product.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights
and you may also have other rights which vary from state to state.

U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994

128-5834

Two Channnel
Automotive Infrared
Stereo Headphone System

Model WHS200

OWNERS
MANUAL

INTRODUCTION

CONGRATULATIONS on your purchase of the
the state-of-the-art Dual Channel Stero Automotive
Infrared Stereo Headphone System from
Audiovox Corporation. This system frees you
from the tangle of headphone wires and lets you
enjoy music or video without the tangle of cables
around you. To ensure the best performance of
your system, please read this manual carefully.

SPECIAL FEATURES

Dual Channel.
Automatic Level Control prevents input signal over
loading.
Uses high frequency infrared light to assure a clean
signal for clear reception.

E

XPLANATION OF CONTROLS (Fig. 1)

Infrared Transmitter

1. INFRARED LED TRANSMITTERS – Sends
signals to headphones. Permits connection
to two stereo sources, providing simultaneous
transmisssion of both stereo signals.

1

Headphone Receivers

2. INFRARED PICKUP SENSORS – Receives
signals from transmitter.

3. BATTERY COVER

4. VOLUME CONTROL

5. POWER SWITCH

6. POWER INDICAT OR LED

7. Channel A/B Switch

8. AUTO ON/OFF MICRO SWITCH

Fig. 1

L

R

2

7

3
6
5
4

Auto ON/OFF

8

Micro Switch is
activated when
headphones are
placed on head

B

ATTER Y INSTAL L ATION (Fig. 2)

1. Place two alkaline AAA batteries in the
Headphones(s) battery compartment making sure
that the battery polarity is correct.

Operation

Please Read Carefully to Prevent Damage to the
Headphones or your Ears:
WARNING: Before switching between channels A
and B, remove headphones and turn the volume

Fig. 2

setting to a low setting as it is possible that the
signal of one channel could be louder than the other.

1. Be sure batteries are properly installed in the
headphones.

2. Turn the headphone volume nearly off before
turning on the power. Turn on the headphone
power then increase the headphone volume
to a comfortable level. You c an increase the
source audio volume if necessary (when
connected to a variable audio source such
as a headphone source).

NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.

Product Specifications:

Operating range:
Frequency Response:
S/N ratio:
Channel Separation:

up to 25 Ft.

35 – 18,000 Hz

60 dB

45 dB