Audiovox WFM7810 User Manual

WFM7810

DC Power Adapter With Built-in Four Frequency

Wireless FM Modulator

Owner’s Manual

Connections and Controls Diagram

Frequency Select

This DC Power adapter has a built-in wireless four frequency FM Modulator. The

FM modulator is designed to accept line level audio signals only. The frequency

select switch is used to select from four available transmitter frequencies. The

radio must be tuned to the same frequency that is selected on the frequency

select switch. To achieve the best results, select a radio frequency that is not

used in your area from the available frequencies.

Connect With A DVD Player

1) Connect the 3.5mm audio jack to the DVD audio output jack on the DVD

player.

2) Connect the power output jack to the 9 VDC input on the DVD player.

3) Plug the Power Adapter into the 12 VDC outlet in the vehicle.

4) Tune the vehicle radio to the same frequency that is selected on the modulator.

NOTE: In certain areas where there are a large number of FM radio stations

(e.g. large cities, urban areas), the reception of the FM signal from the WFM7810

may not be satisfactory, resulting in static, distorted sound or signal bleed through

from strong local radio stations. This is not a defect in the product, but the result

of a stronger local radio station overpowering the wireless FM transmitter in your

WFM7810.