Audiovox VX4012 Owner's Manual

VX4012

7” Single DIN Multimedia Receiver

DVD / SiriusXM Ready™ / Built-In BT Technology /

iPhone® - iPod® / Pandora® / USB / AV In

Operation Manual

4VRMS

RCA Output

VX4012

Android is a trademark of Google Inc.

microSD is a trademark or registered trademark of SD-3C, LLC in the United States, other countries or both.

Pandora® is a registered trademark of Pandora Media, Inc.

2

VX4012

CONTENTS

Features ...�� 5

Controls and Indicators ..........�� 8

Remote Control ..... ��10

External Devices ......�.��14

Quick Start ................�.��15

Audio Equalizer .....................�.��18

System Settings ....�.��20

Disc Operation �.��.....��29

AM-FM Radio ......................�.��.��41

USB / MicroSD card...............�.��........��46

iPod®/ iPhone® Connectivity�.��.��51

AV-In1 / AV-In2 .....................�.��55

HDMI / MHL Connectivity .....�.��56

BT / Hands Free Calling...........�.��.59

Rear Camera .........................�.��67

Steering Wheel Controls (SWC) ..............................�.��68

Pandora® Radio ..........................��.��.69

SiriusXM® Radio .......................�.��.73

User Uploadable Wallpaper ....�.��.86

Troubleshooting ......................�.��.87

Care and Maintenance .......�.��91

Specifications �.��.....��92

Notes �.��...��94 Common Replacement Parts��..Back Cover

3

VX4012

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory (This head unit) has been designed to connect specifically to iPod®/, or iPhone® , respectively, and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the standards. Please note that the use of this head unit with iPod® or iPhone® may affect mobile phone performance.

iPod®/ iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries.

4

operation of this device or its compliance with safety and regulatory

VX4012

Thank you for choosing a Jensen product. We hope you will nd the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VX4012 Multimedia Receiver for maximum enjoyment. Please save this manual for future reference.

We recommend having your Jensen VX4012 Multimedia Receiver installed by a reputable installation shop.

FEATURES

DVD

• Audio Equalizer

• Next Chapter and Previous Chapter

• Play/Pause

• Track Direct Entry

• Disc Menu

• Selection Repeat / Track Repeat

• Disc Audio

• Disc Language

• Picture Control

CD / MP3 / WMA

• CD-Text Compatible

• ID3 Tag Compatible

• Directory Search (MP3 / WMA Only)

• Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW

• Audible Forward / Reverse Track Search (CD-DA Only)

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

AM-FM

• USA, China, Japan, Europe, Europe (LW) and Orient (OIRT)

• 30 Station Presets (18 FM / 12 AM)

• Auto Stereo / Mono

• Local / Distance

• Auto Store / Preview Scan

iPod®/iPhone®

• iPod®/ iPhone® via USB

• High Speed Direct Connect Interface to Access iPhone® and iPod® Playlists,

Artists,

Albums

• Power Management Charges iPhone® / iPod® while Connected

5

VX4012

SiriusXM-Ready®

• Satellite Channel Name, Artist, Song, and Categories Displayed on Monitor (Vehicle Tuner and Subscription required and sold separately)

Chassis

• 1.0 DIN (Import / ISO-DIN Mountable)

• Motorized Flip-Out / Flip-Up TFT Screen

• 7” High Definition TFT LCD 800h x 480v x RGB WVGA

•

General

• Beep Tone Confirmation (ON-OFF Option)

• BT Hands-Free operation for safety and convenience and A2DP for streaming music from your smartphone.

• One Composite Video Output for Additional Screens

• Front Panel Audio/Video Input

• Front Panel USB/MicroSD card - Playback Music / Video Files via Portable Hard Drives / USB sticks.

• Ten-Band Graphic Equalizer

• 4VRMS Front / Rear / Subwoofer RCA Line Output

• Rear Subwoofer Line Output

• Rear Camera Input

• Touch Screen Calibration Mode

• Rotary Encoder Audio Control

HDMI / MHL Connectivity - See and control smartphone apps on the larger

• TFT screen. *Some apps may not be supported.

Rear Camera

• The VX4012 is “camera ready.” Before accessing any camera features, you must purchase and install a rear video camera.

6

VX4012

WARNING! Never install this unit where operation and viewing could

interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for

rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law.

WARNING!

WARNING! To prevent injury from shock or fire, never expose this unit to

moisture or water.

WARNING!

WARNING! Using an improper fuse may cause damage to the unit and

result in fire.

Never disassemble or adjust the unit.

Never use irregular discs.

7

VX4012

CONTROLS AND INDICATORS

OPEN

VX4012 Controls and Indicators

1. LCD Screen and Touch Screen:

Touch icons on this screen to access menus or control functions.

2. Eject ( ) Button:

Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is ejected and the unit will change to radio operation. If the disc is not removed from the unit and the button is pressed again, the disc will be re-loaded. If the disc is not removed from the disc slot within 10 seconds of being ejected, it will be automatically reloaded to prevent it from being accidentally damaged.

8

VX4012

3. Display (DISP) Button:

Touch to adjust the screen brightness. Touch and hold to turn the screen o. When the TFT is closed, press once and repeat to cycle through clock time, metadata, RDS information, etc. The type of information displayed depends upon the selected source

3�5 mm AV IN Jack:

4.

This connector accepts a 3.5 mm jack through which signals from various audio/video devices can be applied to the unit.

5.

Open Button: Press to open/close the TFT/LCD screen.

Reset Button:

6.

Press this button to reset the system settings (except password and parental lock settings) and to correct a system halt or other illegal operation. Use the tip of a pen to press the Reset button.

7.

Micro SD Card slot: Playback of music/video files.

8.

USB slot: Used to connect an iPod®, MP3 player or flash d for playback of music/video file .

9.

Interface Cover: Covers the MicroSD card slot, USB slot and Reset button.

10. Remote Sensor:

Used to receive command signals from the remote control. Previous ( ) / Next ( ) Buttons:

11.

Press the Previous ( ) button to play the previous track on a disc. Press the Next ( ) button to play the next track on a disc.

12. Rotary Volume ( ) Knob / Mute Button

Rotate the knob to adjust the volume from 0 to 50. Press the knob momentarily to mute the audio. Press the knob again to restore the audio.

13. SRC / Power On/Off ( ) Button

Press to turn the unit ON. When on, press to switch the playing source. Press and hold to turn the unit o.

14. Disc Slot:

Accepts DVD/CD/MP3 discs. If the unit is turned on, playback begins when a disc is inserted.

evice connection adapter

9

VX4012

NOTES ON REMOTE CONTROL USAGE

• Aim the remote control at the TFT/screen.

• Remove the battery from the remote control or insert a battery insulator if the remote control will not be used for a month or longer.

• DO NOT store the remote control in direct sunlight or in a high temperature environment, or it may not function properly.

• The battery will last for 6 months under normal conditions. If the remote control does not work, please change the battery.

• Use lithium battery type CR2025 (3V) only.

• DO NOT recharge, disassemble, heat or expose the battery to fire.

• Insert the battery in the proper direction according to the ( + ) and ( - ) polarity marks.

• Store the battery in a place where children cannot reach it to avoid the risk of an accident.

10

VX4012

Remote Control Functional Description

1. SOURCE (SRC) Button: Press this button to switch between and select available

sources. (Radio/Disc/Phone/USB/Phone-Audio/SWC/AUX-1/AUX-2/Camera)

2. EJECT Button ( ): Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is ejected and the unit will change to radio operation. If the disc is not removed from the unit and the button is pressed again, the disc will be re-loaded. If the disc is not removed from the disc slot within 10 seconds of being ejected, it will be automatically reloaded to prevent it from being accidentally damaged.

AUDIO Button: Press to display and select the audio language in DVD mode.

3. Each time the button is pressed, the language changes. NOTE: The languages for audio vary from disc to disc.

4. VOLUME Button (VOL + and -): Press these buttons to increase or decrease

the playback volume.

BAND Button: Press this button to scroll though preset stations or when in

5.

disc mode, this button is used for Fast playback / Slow playback. Press this button to answer an incoming BT phone call.

6. REP

7.

8. POWER Button ( ): Press this button to turn the unit ON and OFF.

9. SUBTITLE Button: Press to display and select the subtitle language in DVD

10. MENU Button: Press this button to access the root menu of a DVD

11.

EAT (RPT)

MUTE Button: Press this button to turn the audio output ON and OFF.

Each time the button is pressed, the subtitle language changes. NOTE:

mode.

The type and number of languages for subtitles vary from disc to disc.

during playback. The disc will return to normal playback and the root will disappear if no selection is made within 10 seconds.

FAST FORWARD [ ] Button: Press this button to forward Disc play 2x, 4x, 8x or 20x normal speed. Press this button while in Radio mode to search available

radio station by increasing tuning frequency.

Button: Repeat playback

or CD

menu

11

VX4012

12. NEXT

13.

14.

15.

16. NUMBER Buttons (1-6): Press these buttons to directly access chapters and

17.

(uul) Button: Press this button to skip to the next chapter, track or

song during playback of a disc. Press this button while in search available radio station by increasing tuning frequency.

PLAY / PAUSE ( ) Button: Press this button to pause the playback of a disc. Press this button again to resume normal playback.

PREVIOUS (ltt) Button :: Press this button to go back to the previous chapter, track or song during playback of a disc. Press this button while in Radio mode to search available radio station by decreasing tuning frequency.

FAST REVERSE [ ] Button: Press this button to reverse Disc play 2x, 4x, 8x

or 20x normal speed. Press this button while in Radio mode to search available radio station by decreasing tuning frequency.

tracks, dialing phone numbers, or entering passwords.

RANDOM (RDM) Button: Press this button to play tracks or chapters in random order while playing a disc.

Radio mode to

12

VX4012

USING THE TFT MONITOR

Opening / Closing the TFT Monitor

Open the TFT Monitor

Press the OPEN button on the front panel to activate the mechanism that moves the TFT screen into the viewing position.

Close the TFT Monitor

Press the OPEN button on the front panel to load the TFT screen back into the compartment.

TFT Monitor Tilt Angle Adjustment

A known characteristic of TFT panels is that the quality of the display varies in relationship to the viewing angle. To adjust the monitor angle for optimum viewing:

Press and hold the OPEN button (> 1 second) on the front panel.

1.

2. To adjust the tilt of the display panel, turn the rotary volume ( ) knob. To store the new tilt setting, press and hold the OPEN button again or let

3. the feature time out after 5 seconds. The rotary volume ( ) knob will return to normal operation.

13

VX4012

EXTERNAL DEVICES

Connecting External Devices

External devices, including a game console, video camera, etc. can be connected to this unit using its front A/V In 3.5mm connector (AV (AV In 2) or the USB port.

You cannot directly control external devices connected to the A/V inputs using the front panel controls or this unit’s remote control.

AV In 1

AV

In1 is used for playback of audio/video from an external device connected to the unit through a 3.5mm connector. The unit can increase or decrease the volume of the connected device. All other controls are done on the connected device. Select AV In1 to playback audio/video from the front panel 3.5mm AV In.

AV In 2

AV In2 is used for playback of audio/video from an external device connected to the RCA connectors located on the back of the unit (see the VX4 Guide). The unit can increase or decrease the volume of the connected device. All other controls are done on the connected device. Select AV In 2 to playback audio/ video from the rear RCA AV In

In1), the rear RCA inputs

012 Installation

14

MicroSD card slot

USB Cable (not included)

Connecting External Devices

1

Right Audio

2

Left Audio

3

Ground

4

Video

3.5mmA/V Cable (not included)

VX4012

QUICK START GUIDE

Turning the Unit ON or OFF

Press the front panel SRC / Power ( ) button to turn the unit ON. To turn the unit OFF, press and hold the front panel SRC / Power ( ) button for 2 seconds.

Selecting an Audio/Video Source, Phone, Steering Wheel Controls, Backup Camera or Pandora

To select a source by using the front panel SRC button or main menu screens:

Press the SRC button on the front panel to switch playing sources.

1.

SRC

Button

VX4012 Front Panel

2. Touch the desired source icon on one of the two main menu screens. Screen 1 of 2: Disc, Radio, USB, AV-IN1, Settings, Phone or Camera. Touch Next at the bottom of the screen to access Screen 2 of 2: Steering Wheel Controls (SWC), AV-IN2, Pandora or SiriusXM (SXM).

15

VX4012

System Settings Adjustment

To access and adjust system settings:

1.

Touch the Settings ( MENU. Sub-menus where adjustments can be made will be highlighted.

) icon on the Main Menu screen to enter the SETTINGS

Volume Adjustment / Turn On Volume

To increase or decrease the volume level, rotate the rotary encoder knob. The unit’s front panel screen will display the volume level for volume level ranges from 0 to 50. To set the Turn-On volume, press and hold the rotary encoder knob 1 second while the green volume bar is displayed after setting the desired volume level. You will hear 2 beeps to confirm the new Turn-On volume level.

2 seconds. The

Audible Beep Confirmation

An audible beep tone confir disabled through the Setup menu.

ms each function selection. The beep tone can be

Muting the Audio

Press the front panel Rotary Volume ( ) knob / Mute button to mute the audio from the unit. Mute icon is displayed on the LCD screen. Press the Rotary Volume ( ) knob / Mute button again to restore the audio volume to its previous level. Adjusting the volume or using any of the audio setup features cancels the mute function.

Equalizer Controls

Equalizer ( sources (Disc, Radio, USB, AV-IN or SXM). Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a desir custom User setting, make adjustments to the audio Balance and Fade levels or to turn the Loudness option ON or OFF. Touch the SRC icon to return to the current source.

EQ): Adjustment can be made after entering one of the audio/video

ed preset setting (Optimal, Classic, Rock, Jazz,

Techno or Pop), Flat setting,

16

VX4012

Playing a Disc

Button

To begin playback of an Audio/Video Disc:

1.

Press the front panel Rotary Volume ( ) knob / Mute button to turn the unit ON.

Insert a disc with the label side facing up. Playback will begin automatically.

2.

To eject a disc:

1. Press the front panel Eject ( ) button.

Resetting the System

Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen to press and release the reset button located just below the front panel interface cover.

[RESET]

System Reset Button

After a system reset, the unit restores all factory default settings.

Note: If the unit is reset while a DVD is playing, the unit will return to Main Menu once the reset is complete.

Parking Brake Inhibit

When the pink “Parking” wire is connected to the vehicle Parking Brake circuit, the front TFT monitor will display video when the Parking Brake is engaged.

17

VX4012

EQUALIZER CONTROL MENU

Adjusting Equalizer Controls

The Equalizer adjustment screen allows the user to easily adjust the audio system to meet the acoustical characteristics of the vehicle. The acoustical characteristics vary depending on the type of vehicle and measurements.

The Balance/Fader levels and Loudness ON/OFF option of a selected audio/video source (Disc, Radio, USB/iPod®, AV-IN1, AV-IN2 or SXM) is also adjusted through the Equalizer adjustment screen.

Equalizer (EQ) (10 Band)

1. Touch the Equalizer (EQ) icon to view and select a desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop) or Flat setting.

Note: The equalizer will automatically change to “USER” when individual audio functions are adjusted.

Equalizer Adjustment Screen

2. Select a desired frequency range to be adjusted (31.5, 62.5, 125, 250, 500, 1K, 2K, 4K, 8K or 16K).

3. Touch and move the slide bar Up / Down to adjust the amount of boost/cut from +10/-10dB.

User Setting

Touch the User icon to customize each of the equalizers 10 frequency bands.

Flat Setting

Touch the Flat icon to set the equalizers frequencies to the midpoint (0dB).

18

VX4012

Reset

Touch the Reset icon to reset the 10 equalizer band frequencies to the mid point.

Loudness

Touch the Loud icon to turn the loud option ON or OFF. The loud option automatically alters the frequency response curve of audio to make it sound more natural when played at a lower volume level.

Exiting the Equalizer

To exit the Equalizer menu touch the SRC icon to return to the current source.

Fader-Balance

Balance - Touch the FAD-BAL icon on the left side of the equalizer screen to display the balance/fader screen.

Fade-Balance Adjustment Screen

Balance - This feature is used to balance the audio output levels between the

left and right side of the vehicle. Touch the t or u icons to change the balance control settings -20 (Left) to +20 (Right). The setting can also be changed by touching screen within the grid to move the sphere.

Fader - This feature is used to fade the audio output levels between the front and rear of the vehicle. Touch the p or q icons to change the fade control settings -20 (Rear) to +20 (Front). The setting can also be changed by touching screen within the grid to move the sphere.

Sub (Subwoofer) - This feature is used to reduce or increase the subwoofer sound level. Touch the slide bar p or q icons to adjust the settings.

Exiting the Balance-Fader

To exit the balance-fader touch the SRC icon on the top left corner of the screen.

19

VX4012

SYSTEM SETTINGS

To access System Settings, touch the icon on the Main Menu screen. There are seven System Settings Sub-Menus (General, Audio, Time, Language, BT, DVD or Volume) that are used to adjust the performance of each option of the VX4012. The Version Sub-Menu is for information only. Menu and the Sub-Menu will appear highlighted. The features available for adjustment will appear on the screen.

System Settings Screens

Adjusting a Sub-Menu Feature

1. Touch the Sub-Menu feature to be adjusted.

2.

Touch the p or q icon to view the previous or next feature page, if applicable. An options list appears on the right

3. Touch the desired feature option once to make selection then touch again to confirm the selection.

Touch a desired Sub-

.

General Sub-Menu Features - Radio Region/Frequency Spacing

USA -

FM - 200kHz / AM - 10kHz

China

- FM - 50kHz / AM - 9kHz

Japan

- FM - 100kHz / AM - 9kHz Europe Europe (LW) OIRT

Radio Lo/Dx - Touch the Distance or Local to increase or decrease radio tuning sensitivity to receive local or distant stations.

TFT Standby - Touch OFF, 10s or 20s to set the unit’s front panel TFT LCD screen to stay ON continuously or to blackout the screen after 10 or 20 seconds.

Display Adjust - Touch Night, Dark, Normal or Bright to set the unit’s front panel TFT LCD screen to be adjusted for day and night conditions.

20

- FM - 50kHz / AM - 9kHz

- FM - 50kHz / AM - 9kHz / LW - 30kHz

- FM - 50kHz / AM - 9kHz / OIRT - 30kHz

VX4012

Beep - Touch ON or OFF to turn the selection confirmation beep ON or OFF.

Wallpaper - Touch wallpaper selection to select wallpaper. Touch again

to confirm and set the wallpaper.

Calibration- The Touch Screen Calibration adjustment is used to set the parameters of the touch screen to ensure that when the screen is touched, it corresponds to the feature desired.

Note: Never use a pen or sharp object to calibrate the touch screen as this will damage the panel.

1. Touch the Calibrate icon and the first screen will appear with instructions.

2. Follow the instructions on the screen touching and momentarily holding finger or a stylus to the center of the target for 2 seconds. Repeat as the target moves to each corner of the screen and finally to the center.

Calibration Screen

3. The second screen will appear:

Calibration Screen Confirmation

4. If the screen is touched, the new calibration parameters will be accepted. If the screen is not touched within thirty seconds, the new parameters will be disregarded.

21

VX4012

Illumination - Customize the front panel illumination. Touch to change the

illumination color. Select a color or touch Custom > Adjust to select the color palette.

UI Color - Touch green, red, amber, blue or purple to select the user interface color. Touch again to confirm and set the color.

Demo - Touch ON or OFF to turn the demonstration mode ON or OFF. The factory default setting is ON.

22

VX4012

Audio Sub-Menu Features

The Audio Sub-Menu is used to turn the Subwoofer output ON or OFF and to select a Subwoofer crossover frequency.

Audio Sub-Menu Screen

Subwoofer - Touch ON or OFF to turn the subwoofer output ON or OFF.

Subwoofer Crossover - Touch a crossover frequency (80Hz, 120Hz or 160Hz)

to set a cut-off frequency for the subwoofer’s low-pass filter (LPF).

Time Sub-Menu Features

The clock appears in the top right corner of the screen during certain operations.

Note: The AM/PM indication will change as you continue to adjust the hour past 12.

Time Sub-Menu Screen

Date - Touch the Date icon and use the p or q icons to set the day, month, and

year. After setting the date, touch Save. The date will appear to the right of the Date option.

Clock Mode - Touch 12Hr to set the clock display to 12 hour time intervals using AM and PM. Touch 24Hr to set the clock display to a 24 hour time interval (or military time).

23

VX4012

Time - Touch the Time icon and use the p or q icons to set the hour, minute, and

either AM or PM. After setting the time, touch Save. The time will appear to the right of the Date option.

Date Settings Time Settings

Date and Time Setting Screens

Language Sub-Menu Features

If a DVD supports more than one Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used.

Language Sub-Menu Screen

On Screen Display (OSD) - Touch English, Spanish or French to select the

language for the OSD Display.

DVD Audio - If available, this feature allows the user to select one of the languages contained on the disc for the DVD audio.

DVD Subtitle - If available, this feature allows the user to select one of the languages contained on the disc for the DVD subtitles.

Disc Menu - Allows the user to select one of the languages contained on the disc menu�

24

VX4012

BT Sub-Menu Features

The BT audio capabilities can be used for wireless phones hands free applications. Before attempting to use the BT functions on this unit, please make sure the wireless phone to be connected supports BT functions.

BT Pairing Code Screen 2

BT - Touch ON or OFF to turn the BT function ON or OFF. Auto-Connect - Touch ON or OFF to turn the BT Auto-Connect function ON or

OFF. Auto-Answer - Touch ON or OFF to turn the BT Auto-Answer function ON or

OFF. Pairing - This feature allows the user to create a unique 4 digit code for

pairing BT devices to the unit. The factory default pairing code is “5309”.

1. Touch the Paring Code icon and the Pairing Code entry screen will appear.

2. Use the keyboard to enter a unique 4-digit Pairing Code.

3. Touch OK to confirm 4 digit pairing code.

NOTE: If a wrong digit is entered touching the arrow will remove the number.

Pairing Code Entry Screen Pairing Code Confirm tion Screen

Pairing Code Screens

25

VX4012

DVD Sub-Menu Features

The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.

DVD Sub-Menu Screen

Set Password - This feature allows the user to create a unique 4-digit password to

activate or deactivate the “Rating” option.

1. Touch the Set Password Code icon and the Password entry screen will appear. Use the keyboard enter a unique 4 digit Password.

2.

NOTE: If a wrong digit is entered touching the green arrow will remove the

number.

3. Touch OK to confirm 4 digit Password.

Password Entry Screen Password Confirm tion Screen

DVD Password Screens

Rating Level - Select the appropriate rating level for the intended viewing

audience (Kid Safe, G, PG, PG-13, PG-R, R, NC-17, and Adult). The user may override higher ratings by using the password.

DRC - This feature allows the user to turn the Dynamic Range Control ON for better playback for low volumes or OFF.

26

VX4012

Load Factory - This feature allows the user to “Reset” to restore the factory default

settings (Rating system only). To reset the password, access the “RATING” menu and enter the current password.

Once the correct password is entered, you can access the “Password” field and enter a new one.

Note: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc package, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc, allowing the appropriate content will play. For details, please refer to the disc description.

Volume Sub-Menu Features

The Volume Sub-Menu allows the user to increase or decrease the relative volume of the audio output of each source individually.

Volume Sub-Menu Screen 1 Volume Sub-Menu Screen 2

Volume Sub-Menu Screens

DVD - Touch the DVD icon to enter the setting, then use the p or q icons

increase or decrease the relative volume level between -6 to +6.

USB - Touch the USB icon to enter the setting of the connected device, then use the p or q icons to increase or decrease the relative volume level between -6 to +6.

Radio - Touch the Radio icon to enter the setting, then use the p or q icons increase or decrease the relative volume level between -6 to +6.

BT - Touch the BT icon to enter the setting of the connected device, then use the p or q icons to increase or decrease the relative volume level between

-6 to +6.

27

VX4012

AV-IN 1 - Touch the AV-IN 1 icon to enter the setting of the connected device

then use the p or q icons to increase or decrease the relative volume level between -6 to +6.

AV-IN 2 - Touch the AV-IN 2 icon to enter the setting of the connected device then use the p or q icons to increase or decrease the relative volume level between -6 to +6.

Navigation - Touch the Navigation icon to enter the setting of the connected device then use the p or q icons to increase or decrease the relative volume level

between -6 to +6.

iPod - Touch the iPod icon to enter the setting then use the p or q icons to increase or decrease the relative volume level between -6 to +6.

SXM - Touch the SXM icon to enter the setting then use the p or q icons to increase or decrease the relative volume level between -6 to +6.

The default relative volume level setting for all available sources is “0”.

Version Sub-Menu Features

The Version Sub-Menu is used to identify the model and resident operating system as well as the hardware and software versions.

Version Sub-Menu Screen 1 Version Sub-Menu Screen 2

Exiting the System Setup Menu

To exit setup mode and resume normal playback, touch the SRC icon on the screen.

28

VX4012

DISC OPERATION

Compatible Audio Discs Types

This system will play the following types of discs:

• DVD

- DVDs that contain audio and/or video.

Audio discs - Audio CDs that contain audio files.

•

• MP3 discs - A disc that contains audio, video and image files (for example, a CD-R with downloaded MP3 files).

Note: This unit is designed to play pre-recorded (original) CD/DVDs. Some burned CD/DVD's may not play due to different recording formats/speeds.

DVD Operation

Note: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays:

Warning: It is illegal to view

video while driving or operating a motor vehicle. Set parking brake to view video.

From the Main Menu Screen touch the DISC Icon or insert a disc into the disc slot, label side up. Playback begins when a disc is inserted correctly.

DVD Main Menu

hen a DVD is playing, touch the TFT LCD screen to view the DVD main menu. The

W on-scr

een icons and touch key areas are outlined below.

DVD Main Menu

SRC Icon - Touch this icon to return to the Main Menu Screen.

DVD - Displays the current source.

29