IMPORTANT NOTICE
It is unlawful in most jurisdictions for a person to drive a
motor vehicle which is equipped with a television viewe
or screen that is located in the motor vehicle at any point
forward of the back of the driver’s seat, or that is visible,
directly or indirectly, to the driver while operating the
vehicle. In the interest of safety, the VOH1042 DL
should never be installed where it will be visible, directly
or indirectly, by the operator of the motor vehicle.
-1-
6
N
R
E
C
E
P
T
I
O
N
Congratulations on your purchase of the Audiovox
VOH1042 DL drop down TV/Video Monitor. The
VOH1042 DL has been designed to give you and you
family many years of video entertainment in the mobile
environment. Please read the directions that follow to
familiarize yourself with the product and to ensure that
you obtain the best results from your equipment.
NOTE: Installation options vary. See the individual
Owner’s Manuals for each component in your system to
obtain a full understanding of each component’s
operation.
SAFETY PRECAUTION
For safety reasons, when changing Video Media it is
recommended that the vehicle is not in motion, and that
you do not allow children to unfasten seat belts to
change Video Media or make adjustments to the
system. System adjustments can be accomplished
using the Remote Control while seat belts remain
fastened. Enjoy your Audiovox entertainment system
but remember safety of all passengers remains the
number one priority.
-2-
FEATURES
• 10.4” TFT (Thin Film Transistor) Active Matrix LCD
(Liquid Crystal Display) Monitor
• OSD (On Screen Display) For Control Of Picture
Quality And Functions
• Full Function Remote Control
• Television Tuner
• Remote Sensor Eye
• Three Audio / Video Sources
• Speaker Amplifier
• Back-Lit Controls For Low Light Operation
• Infrared Wireless Headphone Transmitter
• Dual Dome Lights
• Optional Jack for RF Transmitter (for the Wireless
RF Headphones)
FRONT PANEL FEATURES –
1. Power Button – (Bright red when system is ON, dim
when system is OFF).
2. Channel Up/Down – Changes the TV channel.
3. Auto Program Switch (AP)– Auto Program used to
program local channels into TV memory. Press when
vehicle is in a new location.
4. Sensor Eye – Allows the remote control to operate
the VOH802 DL’s OSD system (On Screen Display),
volume to Wired Headphone Jacks (and optional
external speakers), and for control of Video Media
Player and other accessories.
5. Three Position Dome Light Switch
• Auto – Automatically switched on the dome lights
in conjunction with the vehicle’s interio
illumination.
• Off – The Dome lights will not turn on in this
position.
• On – Turns on the Dome lights.
6. Screen release – Slides in the direction of the
arrow to release the drop down screen.
See Figure 1
7. TV/AV– Any video equipment connected to the
-4-
AUDIO/VIDEO inputs can be used with the TV by
pressing this button. Each time the button is pressed
the Audio/Video source will change in the following
sequence VIDEO 1, VIDEO 2 and TV.
8. Volume Up/Down – Controls Volume to Headphone
Jacks and external Speakers if connected. Also, used
to adjust the picture control setting when “contrast”,
“bright”, “color” or “tint” is displayed on the screen.
9. Infrared Transmitter – Used to transmit audio to
Wireless Headphones.
10. Picture Select – Each time this button is pressed,
the screen picture adjustment display cycles through
“adjustment bars” for CONTRAST, BRIGHTNESS,
COLOR, and TINT. Once the desired adjustment ba
is displayed, use the VOLUME UP/DOWN buttons to
adjust the setting. The display will automatically turn
off if no adjustments are made within 6 seconds, or i
any other button is depressed.
11. Dome Lights – Provide additional illumination.