Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used
for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television
reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle
is in “park” or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the
parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the
operator of the motor vehicle.
Warnings
Do not use any solvents or cleaning materials when cleaning the video monitor.
Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.
Lock the LCD screen in the fully closed position when not in use.
Before putting on headphones always adjust the volume setting to the lowest position.
Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain
the vehicle’s battery.
Do not put pressure on the screen.
Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.
Television Reception
This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving
vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary
vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with
home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be
snowy, or cause some color loss.
-2-
128-7288
2 of 16
Congratulations on your purchase of the Audiovox VOH1012
Drop-Down Video/Monitor. The VOH1012 has been designed
to give you and your family many years of video entertainment in
the mobile environment. Please read the directions that follow
to familiarize yourself with the product and to ensure that you
obtain the best results from your equipment.
Please note: Installation options vary , see the individual owner’s
manuals for each component in your system to obtain a full
understanding of each component’s operation.
Safety Precaution
For safety reasons, when changing video media it is
recommended that the vehicle is not in motion, and that you do
not allow children to unfasten seat-belts to change video media
or make any adjustments to the system. System adjustments
can be accomplished using the remote control, while seatbelts remain fastened. Enjoy your Audiovox entertainment
system but remember the safety of all passengers remains the
number one priority.
Features
••
• 10.2 Inch TFT (Thin Film Transistor) Active Matrix
••
LCD (Liquid Crystal Display) Monitor
••
• OSD (On Screen Display) for Control of Picture
••
Quality and Functions
••
• Input for Optional TV Tuner*
••
••
• Full Function Remote Control
••
••
• Infrared Transmitter for IR Wireless Headphones
••
••
• Three Audio / Video Input s (A V1/A V2/AUX)
••
••
• Built-in Five Frequency Wireless FM Modulator
••
(**Optional Relay Box)
••
• Forward and Rear Remote Sensor
••
••
• Dome Lights with 3-Position Switch
••
••
• Backlit Controls for Low Light Operation
••
Options
* Audiovox P/N PODTVT
** Audiovox P/N SIRSWB
-3-
128-7288
3 of 16
Controls and Indicators Diagram
1
2
FMM
FMM
SELECT
IRT
ON/OFF
PICTURE
SELECT
3
4
SELECT
IRT
ON/OFF
PICTURE
SELECT
12
13
14
3
7
5
6
11
10
9
-4-
AUX
8
128-7288
4 of 16
Control Function Descriptions
1. POWER Button – Used to turn the system ON/OFF . Bright
red when system is on, dim when off.
2. Infrared Transmitter and Sensor – Use to transmit audio
to the wireless headphones. Also allows the remote control
to operate the VOH1012 and to control other accessories in
the system.
3. Dome Lights – Provide additional interior illumination.
4. SOURCE Select – Used to select one of the three sources
( A V1,AV2, AUX, *TV Optional).
5. ( + ) Button – Used to increase levels in the picture
adjustment mode.
6. PICTURE SELECT Button – Allows the user enter the picture
adjustment mode.
7. ( – ) Button – Used to decrease levels in the picture adjust
mode.
8. Auxiliary A/V Input – Allows input from an external source
using the supplied A/V adapter cable.
9. Rear Infrared Sensor – Allows the remote control to operate
the VOH1012 and other accessories.
12. FM Select Button – When this button is pressed it will turn
on the wireless FM Modulator and then cycle through the
available FM frequencies (Channel 1, 88.3MHz; Channel
2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz;
Channel 5, 89.9MHz and OFF).
13. IRT ON/OFF – When this button is pressed it will turn the
IR Transmitter ON/OFF for use with IR Wireless Headphone
Channel A.
14. Three position Dome Light Switch*
• Auto – Automatically switches on the dome lights in
conjunction with the vehicle’s interior illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
*Refer to Installation Guide for wiring instructions.
10. Drop Down LCD Panel.
11. Screen release – Moves in direction of the arrow to release
the drop down screen.
-5-
128-7288
5 of 16