Audiovox VOD85 User Manual

VHDIND

Operation Manual

Manual del Usuario/Guide d'Utilisateur

Table of Contents

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VHDIND for maximum enjoyment.

Preparation............................................................................................. 1

Installation.............................................................................................. 2

Controls and Indicators......................................................................... 3

Remote Control...................................................................................... 4

Operating Instructions .......................................................................... 5

Setup....................................................................................................... 6

Troubleshooting..................................................................................... 8

Specifications......................................................................................... 9

1-Year Limited Warranty........................................................................ 9

Contenido

Gracias por elegir los productos Jensen. Esperamos que encu entre en este manual instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá cómo utilizar todas las funciones de su nuevo VHDIND Jensen para su máximo entretenimiento.

Preparación ....... ................................................................................... 11

Instalación ...... ...................................................................................... 12

Controles Y Indicadores.......... ... ......................................................... 13

Control Remoto.................................................................................... 14

Instrucciones de Operación....... ... ... .... ............................................... 15

Configuración....... .... ... ... ...................................................................... 16

Troubleshooting................................................................................... 18

Especificaciones............ ... ................................................................... 19

Garantia Limitade de 1 Año .................................... ............................ 19

Table des matières

Merci d'avoir choisi un produit Jensen. Nous espérons que vous allez trouver les instructions dans ce guide de propriétaire claires et faciles à suivre. Prenez quelques minutes à le consulter, vous apprendrez à utiliser toutes les fonctions de votre nouvelle VHDIND Jensen pour en tirer une jouissance maximum.

Préparation........................................................................................... 21

Installation............................................................................................ 22

Contrôles et indicateurs...................................................................... 23

Télécommande..................................................................................... 24

Instructions d'opération... ... .... ... ... ... .... ... ...... ... .... ... ... ... .... ... ... ... ... .... .. 25

Configuration....................................................................................... 26

Depannage ........................................................................................... 28

Specifications ...................................................................................... 29

Garantie limitée de 1 An...................................................................... 29

VHDIND

PREPARATION

Congratulations on your purchase of the Jensen VHDIND ½ din slot-in DVD player. The VHDIND is designed to optimize the enjoyment of your favorite DVDs in the mobile environment. This DVD Player is constructed to provide years of reliable, trouble-free service.

Please read this manual thoroughly prior to operating the player and save it for future reference. We recommend having your Jensen VHDIND installed by a reputable installation shop.

Tools and Supplies

You will need these tools and supplies to install your VHDIND:

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

Precautions

The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO MOISTURE.

For safety reasons, do not allow children to unfasten seat belts to change video media or make any adjustments to the system. Enjoy your entertainment system, but always remember the safety of all passengers is the number one priority.

IMPORTANT NOTICE: An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied m ust be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.

Objects and Liquid

Do not insert objects of any kind into the system through its openings; do not spill or spray liquid on or into the system (this may result in a fire or electric shock). Do not place heavy objects on the unit. To ensure proper ventilation and proper operation, never cover or block the slots and openings.

Disassembly

Do not attempt to disassemble the unit. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system is in need of repair.

Cleaning the Unit

When cleaning, make sure the system is unplugged from the power source. Do not use any solvents or cleaning materials. Clean the DVD player using a lightly dampened lint free cloth to wipe the unit.

Discs or (DISC Media)

Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources. Do not touch the surface of the disc. Handle the disc by its edges. Clean the disc by wiping the disc from the center out with a soft lint free cleaning cloth. Remove the disc from the unit and store it in its case after playing. Some playback operations of discs may be intentionally fixed by software producers. Unit plays discs according to the disc contents the software producers designed. Therefore, some playback features may not be available. Refer to the instructions supplied with the discs.

VHDIND

Powering the DVD Player

This system MUST be powered from switched (Accessory) power as indicated on the marking label. Power should be applied to the unit when the ignition key is in the Run and/or Accessory positions. Use only the supplied power cable provided with this set to avoid electric hazards.

Operation

When the temperature rises dramatically from a very low temperature, moisture may condense inside the VHDIND and cause the DVD player to malfunction. If the VHDIND does not operate properly under these conditions, leave the VHDIND turned on for at least 30 minutes to allow the moisture to evaporate.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation.

NOTE: If the VHDIND is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.

INSTALLATION

Figure 1 - Installation

Screw M 3 6

5. Complete wiring as illustrated in “Figure 2 - Wiring Diagram.”

6. Reconnect the battery negative terminal.

NOTE: When replacing a fuse, be sure to use the correct type and amperage to avoid damaging the radio.

7. Turn the unit on to confirm operation (ignition switch must be on). If the unit does not operate, recheck all wiring until the problem is corrected.

8. Replace any items you removed from the dashboard.

9. Reinstall the dash panel.

Figure 2 - Wiring Diagram

Screw M 3 6

1. Remove the two transport screws.

2. Attach the mounting bracket to the player using the supplied screws.

3. Attach the DVD player to the vehicle using the mounting brackets.

NOTE: For proper operation of the DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.

4. Connect the wiring adapter to the existing wiring harness.

VHDIND

CONTROLS AND INDICATORS

1. Power Button

Turn the unit on/off

2. Play/Pause Button

Play/Execute media or setting Still Picture

3. Stop Button

(1 time) Stop at the present playing point (2 times) Stop playing

4. Previous

Go back to the preceding chapter, track or scene during play back

5. Next Button

Go to the next chapter, track or scene during play back

6. Eject Button

Eject/load the disc

7. Remote Control Sensor

8. Disc Slot

9. Reset Button

Reset system settings to factory default

10. Aux In LED

Figure 3 - Front Panel Operation

VHDIND

REMOTE CONTROL

Inserting the Battery

1. Open the battery compartment cover.

2. Insert the new battery (3V Cr2025). Make sure the positive and negative battery terminals are oriented as indicated below.

3. Close the cover.

Using the Remote Control

Point the remote control toward the front of the player (at the remote control sensor).

NOTE: The operation angle is about 30 degrees in each the direction of the front of the Remote Control Sensor (see page 3).

Table 1: Remote Control Functions

Button Function

Name Ref # DVD VCD CD/MP3

MODE 1 Selects playing mode POWER/

MENU 3 Enters the main menu of

, , ,

Enter/Play 5 Confirms the track/chapter selected with the number key or cursor buttons or

VOL -/VOL+ 6 Increases/decreases volume 1, 2, 3, 4, 5,

6, 7, 8, 9, 0 (Numeric Keypad)

10+ 8 Increases selection by 10. TITLE 9 Enters the title menu of

AUDIO 10 Changes the audio lan-

RPT 11 Repeats playback of current chapter/track SUBTITLE 12 Selects subtitle language DISP 13 Displays playing information

Setup 15 Displays or exits the Setup menu PAUSE 16 Pauses playback Pauses playback/starts

MUTE 22 Toggles on/off audio output GOTO 23 Goes to specific time frame and playback ZOOM 24 Zooms in/out on an image A-B 25 Sets up repeat playback from time frame A to time

ANGLE 26 Plays back disc in different

SLOW 27 Activates slow motion playback

2 Turns the power on/off

the disc

4 Moves cursor up/down or left/right

returns to playback

7 Directly accesses chapter Directly accesses track

the disc

guage for disc playback

14 Ejects disc

17 Stops playback 18 Selects the next chapter/track for playback 19 Selects the previous chapter/track for playback 20 Fast forwards the disc content 21 Fast reverses the disc content

frame B

angle for a scene

Turns on PBC when playing VCD

Plays first ten seconds of each chapter/title

Plays back Picture CD with different angle of picture displayed

playback

VHDIND

OPERATING INSTRUCTIONS

Loading a DVD/VCD/CD Disc

1. Turn the ignition to the Accessory (ACC) position.

2. Press the POWER/ button.

3. Insert the disc into the disc slot with the label side facing up.

The player starts playback automatically.

NOTE: The player can load a disc while the power is off.

Playing MP3 Discs

CD-R/RW discs encoded in MP3 format are compatible with this device. After inserting an MP3 Disc, the DVD player will initialize the disc and display the directory (folder) on the monitor. The menu screen appears automatically. You can use the menu screen to change folders and songs. The system plays the songs in the order in which they were recorded onto the disc.

1. Press the screen.

2. Press the ENTER button to select the highlighted folder. All songs available under the selected folder are listed.

3. Use the

4. Press ENTER to play the selected song.

Use the (NEXT) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the song.

Ejecting a Disc

Press the (EJECT) button to eject the disc.

NOTE: The player can eject a disc while the power is off.

Stopping play

1. Press the (Stop) button to stop playback. Press the (play) button to resume playback.

2. Press the

Rapid Forward/Reverse

Press the button to fast forward or the button to rewind during playback. Each time the button is pressed, the speed changes (depending on the disc format) for DVD/VCD/CD/MP3 discs as follows: Normal playback > 2x > 4x > 8x > 20x.

Skipping Track

To skip to the next track, press the button on the remote control or front panel during playback. Press to move to the previous track.

Slow Motion Playback (DVD/VCD)

Press the SLOW button during playback to activate slow motion playback. Press the SLOW button repeatedly to move through the following playback options for DVD/VCD: 1/2x > 1/4x > 1/6x > 1/7x < 1/2x < 1/4x < 1/6x < 1/7x < Normal playback.

or buttons to choose a folder from the folder list on the left side of the

or button to choose a song from the list.

(Stop) button twice to stop playback and return to the initial Track/Chapter.

Pause (still picture)

Press the (PAUSE) button during playback to temporarily stop playback. Press PAUSE twice to enter the step mode. Press ENTER to resume normal playback.

Menu Operation

A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu appears on the TV or Monitor screen. Contents of the menu vary depending on the disc. Press MENU during playback to display the main menu. Some DVDs only allow you to select disc playback options using the DVD root menu.

Display Mode

During playback, press DISP to display the current disc playback information. Press the DISP button to remove the display.

DVD Playback

Disc type, elapsed time, remain time, Title number, Chapter number, view angle, audio channel, audio type, language, and Subtitle number currently playing will be shown on the screen. With the message on the screen, use the arrow buttons to select a different mode. Input a number to change the title or chapter, or press the ENTER button to change the mode.

SVCD, VCD, and CD Playback

When playing an audio CD, the VHDIND will automatically display the following disc playback information.

1. The current track

2. The number of total tracks

3. Playing time of the disc

4. Remaining time of the disc

MP3 Playback

During MP3 playback, press the DISP button to view the elapsed playing time.

Multi-Angle Function (DVD)

During playback, press ANGLE to change the current angle of a disc containing multiple angles. If the disc has only one angle, appears on the screen, indicating that no other

angles are available.

Subtitle (DVD)

Press the SUBTITLE button repeatedly during playback to change the subtitle language for the disc (if available). The number of available subtitle languages will vary depending on the disc.

Multi-Audio Language Function (DVD)

Press the AUDIO button repeatedly during playback to change the language for the audio sound track (if available). The number of available languages will vary depending on the disc.

Some discs only contain one language sound track. When there are no other language sound tracks, is displayed in the top left corner of the screen.

NOTE: Some DVDs only allow access to these functions through the DVD menu.

VHDIND

Zoom

During playback, press the ZOOM button to enlarge the picture by 2x or 3x, with the current zoom multiple displayed on the screen.

Repeat Play

DVD Playback

During playback, press the REPEAT button once to repeatedly play the current chapter. Press a 2nd time to repeat the current title. Press a 3rd time to cancel the repeat function and resume normal playback.

Repeat mode sequence: Repeat Chapter/Repeat Title/Off.

SVCD/VCD/CD/MP3 Playback

The default mode for the Repeat feature is “OFF”. Press REPEAT consecutively to change the repeat options in the following order:

• Repeat Single - repeats the track that is playing.

• Repeat All - repeats the disc that is playing.

•Off

GOTO a Specific Location on a Disc

Press the GOTO button once to display the time and title/chapter search functions. Press GOTO again to bookmark the current playing position. Press a third time to escape the

function.

Using Auxiliary Devices

The unit can accept an auxiliary (AUX) signal from external equipment.

1. Connect the equipment and the unit with A/V cables. The AUDIO OUT of the external equipment is connected to the AUDIO IN jack on the front panel of the unit, and the VIDEO OUT of the external equipment is connected to the VIDEO IN Jack of the unit.

2. Turn on the external equipment and the unit.

3. Press the MODE button to select input from an external AV signal. The signals are routed through the Video and Audio output jacks on the DVD unit.

Playing a JPEG file

• Preview the JPEG file by pressing the MENU Button.

•Press PLAY to playback the JPEGs in order.

•Press PAUSE to stop on a picture.

SETUP

To access the Setup menu, perform the following steps:

1. Stop disc play.

2. Press SETUP in the stop mode. The initial SETUP menu is displayed.

3. Highlight the preferred item using the arrow buttons.

4. Press the ENTER button to select the highlighted item.

5. Press SETUP again to exit the setup menu.

Language

This setup page includes all items related to the Language display feature. To access the Language menu, use the left/right arrow buttons to select “Language”, and then press ENTER.

• Select “OSD Menu” using the up/down arrow buttons, then press ENTER to enter the submenu. Select the OSD language you desire using the up/down arrow buttons, and then press ENTER to confirm the setting.

• Select “Subtitle” using the up/down arrow buttons, then press ENTER to enter the submenu. Select the subtitle language you desire using the up/down arrow buttons, then press ENTER to confirm the setting.

• Select “Audio” using the up/down arrow buttons, then press ENTER to enter the submenu. Select the audio language you desire using the up/down arrow buttons, then press ENTER to confirm the setting.

• Select ”Disc Menu” using the up/down arrow buttons, then press ENTER to enter the submenu. Select the “DISC Menu” language you desire using the up/down arrow buttons, then press ENTER to confirm the setting.

Video

This setup page includes all items for related to the TV display feature. To access the Video menu, use the left/right arrow buttons to select “Video”, and then press ENTER.

• Select “Display” using the up/down arrow buttons, then press ENTER to enter the submenu.

• 4:3/PS: When the player is connected to a normal TV, and a wide picture is shown

on the full screen.

• 4:3/LB: When the player is connected to a normal TV, and a wide picture is shown

on the screen with a black strip at both the top and bottom of the screen.

• 16:9: When the player is connected to a wide screen TV, a wide picture is shown on

the full screen. Select the aspect ratio you desire using the up/down arrow buttons, then press ENTER to confirm the setting.

• Select “TV Type” using the up/down arrow buttons, then press ENTER to enter the submenu.

• Select NTSC format when connected to an NTSC TV.

• Select PAL format when connected to PAL TV.

• Select AUTO format for the player to select the TV output format according to the

DVD disc format. Select the TV System you desire using the up/down arrow buttons, then press ENTER to confirm the setting.

Rating

This setup page includes all items related to the Rating feature. To access the Rating menu, use the left/right arrow buttons to select “Rating”, and then press ENTER.

• Select “Password” using the up/down arrow buttons. Enter the default password (3308), then press enter to access the menu.

• Select “Rating” using the up/down arrow buttons. Select the rating level you desire by repeatedly pressing the ENTER button. Use the and input either the default password or any new 4 digit password and press ENTER. Rating: 1. Kid Safe 2. G 3. PG 4. PG-13 5. PG-R 6.R 7. NC-17 8. Adult

(UP) button to return to “Password”

Subtitle

Select the preferred Subtitle language using the cursor buttons, and then press ENTER to confirm.

VHDIND

Disc Menu

Select the preferred Disc Menu language using the cursor buttons, and then press ENTER to confirm.

NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while other discs can not.

Restore Defaults

To restore all of the options to the default settings, select “RESTORE DEFAULT” using the up/ down arrow buttons and press ENTER. This will return all of the settings except parental to the default settings.

Table 2: Default Settings

Language OSD Menu English

Subtitle Off Audio English Disc Menu English

Video TV Display Wide

TV Type NTSC

Rating Password unchanged

Rating unchanged

General Disc Information

Table 3: Disc Properties

Symbo

Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18)

Single side single layer (VCD)

Single side single layer 74 minutes

Symbol Meaning

Number of voice languages recorded. The number inside the icon indi ca tes the number of languages on the disc (maximum of 8).

Number of subtitle languages available on the disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the example on the left, the 16:9 video can be converted to Letter Box video.

Indicates the region code where the disc can be played.

• Region 1: USA, Canada, East Pacific Ocean Islands

• Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle

• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia

• Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean

• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North

• Region 6: Mainland China

• ALL: All regions

12cm Disc Properties Max Play Time

Table 4: Disc Symbols

East

Islands/Oceania Africa, North-West Asia

(MPEG 2 Method)

133 minutes 242 minutes 266 minutes 484 minutes

(MPEG 1 Method)

74 minutes

TROUBLESHOOTING

Table 5: Troubleshooting

Problem Cause Corrective Action

Unit will not power on DVD player fuse blown Install new fuse with correct rating

Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front p anel

Remote control does not function Battery depleted Replace battery with new one

Battery installed incorrectly Remove battery and install correctly

No/low audio output Improper audio output connection Check wiring and correct

Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Replace speakers Heavily biased volume balance Adjust the channel balance to the center position Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections

Poor sound quality or distortion Pirated disc is in use Use original copy

Speaker power rating not compat ible with unit Connect proper speakers

Speaker is shorted Check speaker contact Tel-Mute malfunction “MUTE” wire is grounded Check that “MUTE” connection is not grounded and that it’s properly insulat ed Unit resets itself when engine is off Incorrect connection between ACC and positive battery

Interruption occurred during playback Disc is dirty or scratched Clean disc or replace

Incorrect playback message displayed Message is longer than LCD can display

wire

File is damaged/bad recording Recreate disc with good files

Check wiring and correct

VHDIND

Table 6: Error Messages

Message Displayed Cause Corrective Action

Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth

Disc is upside down Insert disc with label side up

Disc not present in loading compartment Insert disc Bad Disc Disc is dirty Clean disc with soft cloth

Disc is upside down Insert disc with label side up Unknown disc Disc format is not compatible with this unit Region Error DVD is not compatible with region code of unit Error Illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism

+ 22 hidden pages