Audiovox VE560 User Manual
ELECTRONICS COR
P .
®
VE-560
Low Profile Television
5.6” LCD Drop Down Under Counter TV
®
TIME SET
F
TIME ADJUST
G
TV/AV1/AV2 AUTO PROG PICTURE VOLUME TV CHANNEL
SENSOR
F
G
Installation and Operation Manual
FEA TURES
n Multi-function Remote Control
n Automatic Channel Programming
n Cable Ready 125 Channel Tuner
n Internal Stereo Speakers
n Wall or Under Cabinet Mounting
For Cu st om er Service
Visit O ur Website At
999
.audiovox.com
Product Inform ation, Photos,
FAQ’s Owner’s Manuals
POWEROPEN
128-6317
NOTE: This Page Left Blank Intentionally
IMPORTANT SAFETY INFORMATION
A. Precautions
1) Unplug the unit before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2) Use only Audiovox approved accessories.
3) Do not install this video product where it is likely to be exposed to water.
4) Do not obstruct the slots and openings in the cabinet. They are provided for
ventilation and are necessary to ensure reliable operation of the TV and to
protect it from overheating. This TV should never be placed near or over a
radiator or heat register. This TV should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided.
5) This TV should be operated only with the AC / DC adapter provided.
6) Do not overload electrical outlets or use extension cords as this can result in
a risk of fire or electric shock.
7) Never push objects of any kind into this TV through openings as they may
touch dangerous voltage points or short-circuit parts that could result in a fire
or electric shock. Never spill liquid of any kind on the TV .
8) Do not attempt to service this TV yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
9) Unplug this TV from the outlet and refer servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or Adapter is damaged.
b) If liquid has been spilled, or an object has fallen into the TV .
c) If the TV has been exposed to water.
d) If the TV does not operate normally when following the operating instruc-
tions.
e) If the TV has been dropped or the cabinet has been damaged.
128-6317
B. Kit Components
INCLUDED IN THIS KIT
1 VE-560 T elevision
2 Audiovox Remote Control (PN 1361613)
3 AC Power Adapter (PN 1541096)
4 Mounting template
5 Hardware Bag
A 10 - 32 x 2 1/2 Mounting screws (4)
B 10 - 32 x 3/4 Mounting screws (4)
C 10 - 32 x 1 3/4 Mounting screws (4)
D 3/4” Spacer (4)
E 1/2” Spacer (4)
F 1/4” Spacer (4)
G Countersunk washer (4)
H Self Adhesive Wire mounting clip (2)
6 Dipole Antenna
AUDIO OX
"
TOOLS REQUIRED
Philips head screwdriver
Centerpunch
1/4” Drill bit
Electric Drill
Adhesive T ape
!
#
A
B
C
D
E
F
G
H
$
1
C. Installation
UNDER CABINET INSTALLATION
Cabinet or Shelf
Bottom Edge Molding
1) Choose an appropriate mounting location underneath a cabinet or shelf. Close
proximity to an electrical outlet and a TV antenna or cable connection will
facilitate a neat, easy installation. Do not mount the VE-560 above a range
or oven. Be sure that the location chosen will provide adequate access to
the electrical connectors on the rear of the unit before continuing.
2) If the location chosen has bottom edge molding it may be necessary to use
the mounting spacers provided to effectively lower the VE-560’s front panel
below the molding. Measure the distance between the bottom of the molding and the bottom of the cabinet. A maximum measurement of 1.5” can be
accommodated without using spacers. For larger moldings choose a combination of spacers which will reduce the mounting depth to 1.5” or less.
3) Measure the thickness of the bottom of the cabinet or shelf and the spacers
chosen. Select the shortest screw length which will pass through the countersunk washer, kitchen cabinet and spacers with between 1/4” and 1 1/2”
inches to spare
4) Cut out the template supplied and tape it in place onto the cabinet surface to
be drilled. Center punch the four holes indicated on the template and remove the template.
5) Carefully drill four 1/4” holes at the locations marked above. Place the screws
chosen through the countersunk washers and then through the holes from
the top down.
6) Screw the appropriate spacers on to the screws first, then position the VE560 and screw it in place using its threaded holes.
7) Plug the AC Power adapter into a nearby electrical outlet and into the receptacle marked DC 12V input at the rear of the VE-560
8) Connect your TV antenna or cable system to the antenna connector on the
rear of the VE-560.
9) Route the wires safely away from heat and moisture sources and secure
them in place using the self adhesive wire mounting clip provided.
2
128-6317
Loading...