Audiovox VE-500A User Manual

P .

ELECTRONICS COR

VE-500A

Low Profile Television

5” LCD Drop Down Under Counter TV

OPEN

5" TFT LCD TV

SENSOR AUTO PRO

n Multi-function Remote Control n Automatic Channel Programming n Cable Ready 125 Channel Tuner n Internal Stereo Speakers n Wall or Under Cabinet Mounting

AUDIO OX

AV/TV

PICTURE VOLUME CHANNEL P0WER

FEATURES

Installation and Operation Manual

-1-

Printer: Leave this page blank

-2-

IMPORT ANT SAFETY INFORMA TION

1) Always unplug the VE500A prior to cleaning.

2) Use only a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

3) Use only Audiovox approved power adapter to operate the VE500A.

4) Never overload electrical outlets or use extension cords as this can result in a risk of fire or electric shock.

5) Do not install the VE500A product where it is likely to be exposed to water. Do not install where there is a chance of liquid being spilt into or on the VE500A.

6) Do not obstruct the ventilation slots. These ventilation slots are necessary to ensure reliable operation of the VE500A and protect it from overheating.

7) Do not install the VE500A near or over a source of heat such as a radiator or heat register.

8) The VE500A should not be installed in an enclosed or built-in location such as a bookcase or rack unless proper ventilation is provided.

9) Never insert objects of any kind into the VE500A through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock.

10) Do not attempt to service the VE500A yourself. Opening or removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified Audiovox service personnel.

1 1) Unplug the VE500A from the outlet and refer servicing to qualified Audiovox service personnel under

any of the following conditions:

a) If liquid has been spilled, or an object has fallen into the TV . b) If the TV has been exposed to water. c) If the TV does not operate normally when following the operating instructions. d) If the TV has been dropped or the cabinet has been damaged.

-3-



INCLUDED IN THIS KIT

1 VE500A 5-Inch T elevision (P/N 136D2179) (1) 2 Remote Control (P/N 136B2180) (1) 3 AC/DC Power Adapter 12V@1.5A (P/N 1541096) (1) 4 Mounting template (1) 5 Hardware Bag(P/N 1502177) (1)

A) 10 - 32 x 2 1/2 Mounting screws (P/N 1001896) (4) B) 10 - 32 x 3/4 Mounting screws (P/N 1001897) (4) C) 10 - 32 x 1 3/4 Mounting screws (P/N 1001898) (4) D) 3/4” Spacer (P/N 1023316) (4) E) 1/2” Spacer (P/N 1023317) (4) F) 5/16” Spacer (P/N 1023318) (4) G) Countersunk washer (P/N 1023319) (4) H) Self Adhesive Wire mounting clip (P/N 1023320)(2)

MUTE

TV POWER

CH3

OPEN

5" TFT LCD TV

VOLCH9

748

PICTURE

SELECT

VOL

0 1--

AUTO

MEMORY

TV/CATV

AUDIO OX

PICTURE VOLUME CHANNE L P0W ER

AV/TVSENSOR AUTO PRO

TOOLS REQUIRED

Philips head screwdriver

Centerpunch

1/4” Drill bit

Electric Drill

Adhesive T ape

A B

-4-

UNDER CABINET INST ALLA TION

Cabinet or

Shelf

OPEN

5" TFT LCD TV

Bottom

Edge

Molding

AUDIO OX

AV/TVSENSOR AUTO PRO

PICTURE VOLUME CHANNEL P0WER

1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet and a TV antenna or cable connection will facilitate a neat, easy installation. Do not mount the VE-500A above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connectors on the rear of the unit before continuing.

2) If the location chosen has bottom edge molding it may be necessary to use the mounting spacers provided to effectively lower the VE-500A ’s rotating screen below the molding. Measure the distance between the bottom of the molding and the bottom of the cabinet. A maximum measurement of 1.5” can be accommodated without using spacers. For larger moldings choose a combination of spacers which will reduce the mounting depth to

1.5” or less.

3) Measure the thickness of the bottom of the cabinet or shelf and the spacers chosen. Select the shortest screw length which will pass through the countersunk washer, kitchen cabinet and spacers with between 1/4” and 1 1/2” inches to spare

4) Cut out the template supplied and tape it in place onto the cabinet surface to be drilled. Center punch the four holes indicated on the template and remove the template.

5) Carefully drill four 1/4” holes at the locations marked above. Place the screws chosen through the countersunk washers and then through the holes from the top down.

6) Screw the appropriate spacers on to the screws first, then position the VE-500A and screw it in place using its threaded holes.

7) Plug the AC Power adapter into a nearby electrical outlet and into the receptacle marked DC 12v input at the rear of the VE-500A

8) Connect your TV antenna or cable system to the antenna connector on the rear of the VE-500A.

9) Route the wires safely away from heat and moisture sources and secure them in place using the self adhesive wire mounting clip provided.

-5-

+ 11 hidden pages