Audiovox VE1020 User Manual
10.2” Low Profile DVD/TV/Speakerphone
- DVD Player & 10.2” TFT LCD Monitor
- AM/FM Stereo Radio
- Multi-Function Remote Control
- Hands Free Speaker Phone Mode
- Cable Ready 125 Channel Tuner
- Internal Stereo Speakers
- 2 A/V Inputs
- Under Cabinet / Table Top Mounting
- Message Record
- 1 -
WARNING – To prevent fire or shock hazard, do not expose this unit to moisture.
CAUTION
This symbol is intended to alert the user to the presence of uninsured “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
TO PREVENT ELECTRIC SHOCK: DO NOT USE THIS POLARIZED AC
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
INTRODUCTION
CAUTION
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
: TO REDUCE THE RISK OF
- 2 -
INFORMATION
This equipment generates and uses radio frequency energy and if not installed and used property, that
is, in strict accordance with the manufacture’s instructions, may cause interference to radio and found
to not comply with the limited for a Class B computing device in accordance with the specifications in
Subpart J of Part 15 or FCC Rules, which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
- Consult the dealer or an experienced radio/TV technician for help
- 3 -
1. Read Instructions – All the safety and operating instructions should be read before the product is
operated.
2. Retain Instructions – The safety and operating instructions should be retained for future reference.
3. Head Warnings – All warnings on the product and in the operating instructions should be adhered
to.
4. Follow Instructions – All operating and use instructions should be followed.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol. Use a damp cloth for cleaning. Do not apply pressure to the LCD screen. Excess
pressure can damage the screen.
6. External Accessories – Do not use external accessories not recommended by the product
manufacturer, as they may cause a hazard.
7. Water and Moisture – Do not use this product near water – for example, near a bath tub, wash
bowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or similar situations.
8. Mounting considerations – Do not place this product on an unstable cart, stand, tripod bracket, or
table. The Product may fall, causing serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacture, or
sold with the product. Any mounting of the product should follow the manufacture’s instructions, and
should use a mounting accessory recommended by the manufacturer.
9. Carts - A product and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
IMPORTANT SAFETY INFORMATION
10. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided.
11. Power Sources – This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply in your home, consult your
product dealer or local power company. For products intended for operation from battery power or
other sources, refer to the operating instructions.
- 4 -
12. Grounding or Polarization – This product may be equipped with a polarized alternating current
line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug still cannot be inserted, contact your electrician to replace your outlet. Do not
defeat the safety purpose of the polarized plug.
13. Power-Cord Protect – Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the product.
14. Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded in order to provide some protection against voltage
surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70,
provide information with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarges unit, connection to grounding electrode (Refer to the figure on page 6).
15. Lightning – For added protection of this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lightning and power-line
surges.
16. Power Lines – An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuit, or where it can fall into such power lines or circuits.
When installing on outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
17. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles,
as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry – Never push objects of any kind into this product through openings in
the chassis as they may touch dangerous voltages points or short-out parts that could result in a fire
or electric shock. Never spill liquid of any kind on the product.
19. Servicing – Do not attempt to service this product yourself as opening or removing covers my
expose you to dangerous voltages or other hazards. Refer to qualified service personnel.
20. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions.
A. When the power-supply cord or plug is damaged.
B. If liquid has been spilled, or object have fallen into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
- 5 -
technician to restore the product to it’s normal operation.
E. If the product has been dropped or damaged in any way.
F. When the product exhibits a significant change in performance – this indicates a need or
service.
21. Replacement Parts – When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or that have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Safety check - Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating condition.
23. Mounting – The product should be mounted only as directed in this manual.
24. Heat – The product should be situated away from heat sources such a radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
- 6 -
1) Unplug the unit before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
2) Use only Audiovox approved accessories.
3) Do not install the product where it is likely to be exposed to water.
4) Do not obstruct the slots and openings in the cabinet. They are provided for ventilation and are
necessary to ensure reliable operation of the unit and to protect it from overheating. This unit should
never be placed near or over a radiator or heat register.
5) Do not overload electrical outlets or use extension cords as this can result in risk of fire or electric
shock.
6) Never push objects of any kind into this unit though openings as they may touch dangerous voltage
points or short-circuit parts that could result in a fir or electric shock. Never spill liquid of any kind on
the unit.
7) Do not atte mpt to service the VE1020 yourself as opening or removing co vers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8) Unplug the VE1020 from the outlet and refer servicing to qualified service personnel under the
following conditions:
a) If the unit has been exposed to water.
b) If the does not operate normally when following the operating instructions.
c) If the unit has been dropped or the cabinet has been damaged.
- Cable System Installation:
Note to CATV system installer: “This reminder is provided to call the CATV (CABLE-TV) system
installer’s attention to article 820-40 of the NEC, that provides guidelines for proper grounding and,
in particular, specified that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical”
- Under cabinet mounting:
“ CAUTION: to reduce the risk of fire, do not place any heating or cooking product beneath this unit”
IMPORTANT SAFETY INFORMATION
- 7 -
CONTENTS OF PACKAGE
1. VE700TVPhone
2. Hardware bag
A. 3/4”Mounting screws (4)
B. 1-1/4” Mounting screws (4)
C. 1-1/2”Mounting screws (4)
D. Foot (4)
E. Hole cap (4)
3. Remote Control Unit
4. F. 1/4” Spacer (4)
G. 1/2” Spacer (4)
H. 3/4” Spacer (4)
5. Battery, size AAA (2)
6. Telephone cord
7. FM Dipole Antenna
7. Right angle coaxial adapter
(for the TV input)
9. FM Antenna Adapter
10. AM Antenna
11. Mounting Template
12. Manual
- 8 -
1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an
electrical outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy
installation. Do not mount the VE1020 above a range or oven. Be sure that the location chosen will
provide adequate access to the electrical connection on the rear of the unit before continuing.
2) If the location chosen has bottom edge molding it may be necessary to use the mounting spacers
provided to effectively lower the VE1020 below or even with the molding. Measure the distance
between the bottom and the bottom of the cabinet. For large molding choose a combination of
spacers which will allow the VE1020 to be secured to the bottom of the cabinet.
3) Measure the thickness of the bottom of the cabinet or shelf and the spacers chosen. Select the
shortest screw length, which will secure the VE1020 to the bottom of the cabinet.
4) Cut out the template supplied and tape it in place onto the cabinet surface to be drilled. Center
punch the four holes indicated on the template and remove the template.
5) Carefully drill four 1/8″ holes at the locations marked above. Place the screws selected through the
VE1020 and then through the spacers (if required from the bottom-up)
6) Position the VE1020 and mount it in place using the selected screws. Do not over tighten
7) Connect your TV antenna or cable system to the antenna connector on the rear of the VE1020.
8) Attach the FM Dipole Antenna to the FM Antenna screws and position the antenna for the best
reception.
9) If using the speakerphone feature, plug the VE1020 into a phone jack.
10) Plug the AC power cable into the wall outlet.
11) Route the wires safely away from heat and moisture sources and secure them in place using the
self-adhesive wire-mounting clip provided.
Under Cabinet Installation
.
- 9 -
Loading...