Audiovox UTXPR Program Guide

TRANSMITTER PROGRAMMING

Note: This mode will only retain the last 4 remote transmit­ters programmed. If the transmitter memory is exceeded,
the security system will start deleting transmitters from
memory in chronological order.

To program transmitters:

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the system will chirp/flash the parking
lights (3) three times, release the button.

4. Press Button 1 of each transmitter you wish to program.
The system will respond with 1 chirp for each accepted
transmitter (up to 4).

5. Turn the Ignition OFF to exit programming. The system will
also exit programming after 15 seconds of inactivity.

Note: This system has 1 button programming which pro­grams all channels of the system.

Technical Support
[phone]