Page 1
Rear Parking Sensor System
Model: PSB100
Users Manual
Features:
• Four reversing sensors detect obstacles up to 4.5 feet away
• Includes 0°, 4°, 8° and 16° sensor sleeves to fit most
bumpers
• Activates only when vehicle is in reverse
• Will not drain battery or void factory warranty
• Includes LED/Speaker display with 3 settings - high, low,
and off
• Three detection zones give the following warnings:
1 = slow beep within 2.5-4.5 feet
2 = medium beep within 1-2.5 feet
3 = steady tone within 1.3 feet
• Works with any vehicle
Page 2
Warnings
This product is intended to assist in safe driving by signaling the driver of
obstacles behind the vehicle while the vehicle is in reverse. You, as the
driver, are solely responsible for the safe operation of your vehicle and
the safety of your passengers according to your local traffic regulations.
Do not use any features of this system to the extent it distracts you from
safe driving. Your first priority while driving should always be the safe
operation of your vehicle. Audiovox Electronics Corporation cannot
accept any responsibility whatsoever for accidents resulting from failure
to observe these precautions or safety instructions.
1. This product utilizes high voltage. Any unauthorized
modifications or damage to the product may result in electrical
shock. Handle all components with care. Inspect regularly for
damage to components and cabling.
2. You are responsible for ensuring that the installation of this
product does not void or affect the vehicle manufacturer’s
warranty.
not liable in full or in part for improper installation resulting in
loss or damage to your property, or for voiding all or part of the
vehicle manufacturer’s warranty.
3. Do not apply excessive force to any of the components contained
within this kit. Excessive force used before, during or after
installation that results in a damaged or non-functional part will
void all warranties.
4.
Please follow the procedures in this manual. Improper installation or
modification of this product will void all warranties.
Audiovox Electronics Corporation or its subsidiaries are
1
Page 3
Product Description
This Rear Parking Sensor System is designed to assist the driver by
providing an alert when an object is behind the vehicle whenever the
vehicle is shifted into reverse. Never rely solely on this product to ensure
the area is clear of children and/or obstructions. This product is not
intended to replace existing safety procedures, but rather to add an
additional safety tool for your vehicle
.
Using the Sensor System
Your backup sensing system transmits and receives ultrasonic waves from
the sensors mounted in your vehicle’s rear bumper. As the transmitted waves
bounce off obstacles behind your vehicle and are received back by the
sensors, the unit’s control box converts these waves into warning sounds, or
beeps, which alerts you, the driver, of obstacles behind y our vehicle.
Your sensing system will signal in three increasing warning tones (beeps)
which correlate the vehicle’s distance from an obstacle. When the vehicle’s
reverse gear is engaged, the system will emit a quick beep. This indicates
that the system is on and the sensors are operating. The following chart
shows the detection range and beep associated with the distance of an object
from the rear bumper.
Distance (feet) Type of Beep
> 4.5ft No beep
4.5ft – 2.5ft Slow repeating beep
2.5ft – 1.3ft Faster repeating beep
<1.3ft Steady tone beep
When towing a trailer, the system will emit a solid beep. Move the switch on
the speaker to the “off” position to turn off the speaker. Remember to turn
the switch to the “high” or “low” position when the vehicle is no longer
towing a trailer.
2
Page 4
Specifications
Power Supply DC9V-DC16V
Current Draw <120mA
Detecting Distance 0ft – 4.5ft
Sensor Cable Length 18ft
Operating Temperature Range -0°F ~ 176°F
Maintenance
Though your backup system requires minimum care, you should maintain its
condition and performance using the following the guidelines:
• Keep the control box away from moisture, extreme heat or cold.
• Keep the sensors free from snow, ice, and debris.
Diagnostics / Trouble Shooting
Problem Solution
No sound when reverse
gear is engaged.
1 Beep System is functioning correctly
2 Beeps 1 sensor is disconnected/damaged
3 Beeps 2-3 Sensors are disconnected/damaged
4 Beeps No sensors are connected
System beeping without
obstacle behind vehicle
1. Check if ignition/reverse light on
2. Check power cable connection
3. Check switch on speaker
1. Ensure sensor is mounted upright.
2. Remove anything mounted on the vehicle
that may be in the detection area.
3. Ensure correct hole size has been drilled in
bumper.
4. Verify sensor is installed at the correct
height.
5. Verify sensor is in the correct position.
6. Check all connections.
7. Ensure module is not mounted near
electrical components with high current.
8. Verify supporter was used if required
(angled/metal bumpers).
3
Page 5
4
Page 6
© 2009 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788
5
Loading...