Audiovox MS1500, MS1500 User Manual
OWNER’S MANUAL
AND
INSTALLATION GUIDE
MS1500
MARINE HIGH POWER AM/FM STEREO RADIO WITH
Visit us at www.asaelectronics.com to see our full line of mobile audio and video products.
MADE IN CHINA
C O M PACT DISC PLAYER, CDC SHUTTLE CONTROLS,
AND WIRED REMOTE CAPA B I L I T Y
I N S T A L L A T I O N
Preparation
Please read entire manual before installation.
Before You Start
1.Disconnect negative battery terminal.
(consult a qualified technician for instructions)
2.Avoid installing the unit where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
1.Remove 2 transit screws located on top of the unit.
2.Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
3.Install mounting sleeve into dash opening, bending tabs to secure.
4.Some vehicles may require an installation kit and/or wiring harness adapter.(sold separately)
5.Ensure that the MS1500 is installed horizontally.
6.Attach speaker and power wires to the mating harness pigtails supplied with the MS1500.
7.Carefully double check the wiring, then plug the pigtails into the radio harness, and the
harness into the rear of the radio. Plug the antenna into the antenna connector.
8.Test for correct operation, then slide the MS1500 fully into the mounting sleeve.
1
WIRING DIAGRAM
CONTROL LOCATIONS
2
The MS1500 is designed to not require a constant voltage supply to maintain
station memories or operational settings. Do not connect to a voltage source
which is constantly hot to prevent draining the battery.
❶ Tune/Track Down
❷ Power
❸ Volume Up
❹ Mode
❺ LCD Display
❻ EQ
❼ Auto Store/Preset Scan
❽ Eject
❾ Mute
❿ Audio Selector
Volume Down
Tune/Track Up
Band/Loudness
Preset 1/CD Pause
Preset 2/CD Scan
Preset 3/CD Repeat
Preset 4/CD Shuffle
Preset 5/CDC Disc Down
Preset 6/CDC Disc Up
IR Remote Sensor
Reset
3
Loading...